ABS 728822 Brake Caliper

ABS 728822 Brake Caliper

The ABS 728822 Brake Caliper is a high‑performance braking component designed for use in a wide range of Honda models, including the CRX, Civic, and Prelude. This caliper delivers reliable stopping power while maintaining durability under demanding driving conditions.

Key Features

• Material Composition: Constructed from a robust gray cast iron alloy, the caliper offers excellent heat dissipation and resistance to corrosion.
• Design Geometry: The caliper features a dual‑pivot design that ensures even pressure distribution across the brake pads, enhancing braking efficiency and reducing wear.
• Compatibility: Engineered to fit the front axle of Honda vehicles such as the CRX (2nd generation), Prelude (3rd generation), and Civic Hatchback (4th generation). It is also compatible with aftermarket brake kits that specify the ABS 728822 designation.
• Mounting: Equipped with standardized mounting bolts and a secure bracket system, allowing for straightforward installation on both left‑hand and right‑hand drive vehicles.
• Heat Management: The caliper’s internal cooling passages are engineered to channel heat away from the pistons, preventing brake fade during prolonged use.

Technical Specifications

Installation Overview

The installation of the ABS 728822 Brake Caliper follows a systematic approach that ensures optimal performance:

1. Preparation: Remove the existing caliper and clean all mounting surfaces to eliminate debris.
2. Mounting: Align the new caliper with the wheel hub, secure it using the supplied bolts, and torque them to manufacturer specifications.
3. Piston Re‑Adjustment: Use a piston retraction tool to compress the pistons back into the caliper housing before installing new brake pads.
4. Brake Pad Installation: Place high‑quality brake pads that match the caliper’s dimensions, ensuring proper fit and contact with the rotor.
5. Bleeding: Bleed the braking system to remove air bubbles, guaranteeing consistent hydraulic pressure.
6. Testing: Perform a low‑speed test drive to confirm that the brakes engage smoothly and without vibration.

Performance Benefits

• Enhanced Stopping Power: The dual‑pivot design provides consistent pressure across both pads, leading to quicker deceleration.
• Longevity: Cast iron construction resists wear and maintains structural integrity over extended use.
• Heat Resistance: Internal cooling passages reduce the risk of brake fade during aggressive driving or heavy traffic conditions.
• Versatility: Its compatibility with multiple Honda models makes it a convenient choice for owners seeking a reliable replacement part.

Maintenance Tips

To keep the ABS 728822 Brake Caliper operating at peak performance, consider the following maintenance practices:

• Inspect brake pads for wear every 10,000 miles and replace them when the pad thickness falls below 2 mm.
• Check caliper mounting bolts for tightness annually or after any significant impact event.
• Clean the caliper surface with a non‑abrasive brake cleaner to prevent contamination of the pads.
• Monitor brake fluid levels and replace the fluid according to the vehicle’s service schedule.

Conclusion

The ABS 728822 Brake Caliper stands out as a reliable, high‑quality component that delivers consistent braking performance across several Honda models. Its robust construction, thoughtful design features, and ease of installation make it an excellent choice for both routine replacements and performance upgrades.