ABS 8845 Brakeshoe Set

ABS 8845 Brakeshoe Set

The ABS 8845 Brakeshoe Set is a premium replacement component designed to restore optimal braking performance for a wide range of Daihatsu and Perodua models. This set replaces the rear drum brake shoes, ensuring reliable stopping power in all driving conditions.

Key Features

• High‑Performance Friction Material: Engineered to deliver consistent braking force while resisting fade during heavy use.
• Precision Machining: Each shoe is cut to exact tolerances, guaranteeing a perfect fit on the drum and smooth operation.
• Durable Construction: Made from advanced composite materials that resist wear, corrosion, and heat buildup.
• Easy Installation: Designed for quick replacement with minimal tools; compatible with standard brake hardware kits.

Compatibility Overview

The set is specifically tailored for the following rear drum brake systems:

• Daihatsu models: Cuore, Sirion I, II, III, IV, V, VI, Mk MIRA, DOMINO, MOVE, SIRION 0.8L
• Perodua models that share the same chassis and brake architecture as Daihatsu.

All compatible vehicles feature a rear drum brake assembly with an inner diameter of approximately 200 mm and a shoe width of 25 mm, matching the dimensions of the ABS 8845 Brakeshoe Set.

Technical Specifications

Performance Benefits

The ABS 8845 Brakeshoe Set offers several advantages over standard aftermarket replacements:

• Consistent Stopping Power: The engineered friction coefficient maintains performance even after prolonged use.
• Reduced Noise and Vibration: Smooth contact surfaces minimize squeal and rattling during braking.
• Extended Service Life: Advanced material composition resists wear, extending the interval between replacements.
• Heat Dissipation: Designed to disperse heat efficiently, reducing brake fade in high‑speed or heavy‑load scenarios.

Installation Guide

Follow these steps for a seamless replacement of the rear drum brake shoes. Always wear safety gloves and eye protection.

1. Secure the vehicle on jack stands and remove the rear wheels.
2. Detach the brake drum by loosening the retaining bolts and sliding it off the axle.
3. Remove the old brake shoes from the backing plate, noting their orientation.
4. Insert the new ABS 8845 Brakeshoe Set onto the backing plate, aligning the mounting holes with the drum’s inner surface.
5. Reattach the drum to the axle and tighten all bolts to the manufacturer’s torque specification.
6. Repeat the process on the opposite side of the vehicle.
7. Test the brake pedal for firmness before driving.

Maintenance Tips

• Inspect brake shoes every 10,000 km or after any significant braking event.
• Clean the drum surface with a non‑abrasive cleaner to remove dust and debris.
• Avoid using abrasive materials that could damage the shoe’s friction layer.
• Check for signs of wear such as uneven tread depth or excessive noise; replace if necessary.

Frequently Asked Questions (FAQ)

Is this set compatible with all Daihatsu models?

No, it is specifically designed for the rear drum brake systems listed in the compatibility section. Verify your vehicle’s model and year before purchase.

Can I use these shoes on a front disc brake system?

No, the ABS 8845 Brakeshoe Set is intended solely for rear drum brakes.

What should I do if I notice squealing after installation?

Squeal may indicate improper alignment or insufficient lubrication. Re‑check the shoe placement and apply a thin layer of brake grease to the contact surfaces.

How long does a typical set last under normal driving conditions?

The advanced composite material can typically last between 30,000 km and 50,000 km, depending on usage patterns and maintenance.

Conclusion

The ABS 8845 Brakeshoe Set delivers reliable, high‑performance braking for Daihatsu and Perodua vehicles equipped with rear drum brakes. Its precision engineering, durable materials, and straightforward installation make it an excellent choice for drivers seeking to maintain safety and performance without compromising on quality.