DLink DIS200G12S

D-Link DIS-200G-12S is a rugged, industrial‑grade Layer 2 Smart Managed Switch engineered for demanding environments where reliability and performance are paramount. Designed to operate in extreme temperature ranges from –40 °C to +65 °C, it delivers robust connectivity with 10 Gigabit Ethernet ports and two SFP slots for fiber uplinks.

Key Design Features

Industrial‑Grade Construction

• Metal housing with CISPR 22 and FCC Part 15B Class A electromagnetic compatibility.
• IP30 protection rating, suitable for dusty or corrosive settings.
• Operating temperature range: –40 °C to +65 °C; storage temperature: –40 °C to +85 °C.
• Humidity tolerance 0–95 % RH during both storage and operation.

Power Efficiency & Thermal Management

• Consuming only 10.26 W, the switch dissipates a modest 35.01 BTU/h.
• Designed for low power consumption without compromising throughput.

Connectivity & Performance

Port Configuration

• 10 x 10/100/1000 Mbps RJ‑45 ports (Gigabit Ethernet).
• 2 x SFP slots supporting 1000BASE‑X fiber modules.
• RJ‑45 console port for out‑of‑band management.

Switching Capacity & Throughput

• 24 Gbps switching capacity, enabling high‑speed data paths across the network.
• Forwarding rate of 17.85 Mpps, ensuring minimal latency for real‑time applications.
• Supports jumbo frames up to 9216 bytes, reducing overhead on large payloads.

Advanced Layer 2 Capabilities

VLAN & QoS Management

• Up to 4094 VLANs, including Voice VLAN and Port‑Based VLAN support.
• IEEE 802.1Q tagging, priority queuing (802.1p), and link aggregation (IEEE 802.3ad).
• Quality of Service controls for traffic prioritization.

Link Aggregation & Redundancy

• IEEE 802.3ad LACP support for combining multiple links into a single logical link.
• Ethernet Ring Protection Switching (ERPS) for rapid failover in ring topologies.

Security Features

• 802.1x authentication with RADIUS and SSL/TLS support.
• Port‑based authentication, ensuring only authorized devices connect.
• Secure management via SNMP v1/v2c/v3, Telnet, and SNTP.

Management & Monitoring

Comprehensive Management Protocols

• SNMP v1/v2c/v3 for network monitoring and configuration.
• Telnet access for command‑line interface management.
• SNTP for time synchronization across devices.

MAC Address Table & Traffic Handling

• 8000 MAC address table entries, allowing extensive device tracking.
• Supports 802.1s spanning tree protocol for loop prevention.

Reliability & Longevity

Mean Time Between Failures (MTBF)

• Exceptional MTBF of 276,773 hours, translating to over 31 years of continuous operation under normal conditions.

Physical & Packaging Details

Dimensions & Weight

• Length: 409 mm; width and height not specified but compact for DIN rail or wall mounting.
• Shipping weight per unit: 11200 g; net weight: 10370 g.

Packaging

• Packaged in sets of 5 units, facilitating deployment across multiple sites.
• Each unit is individually sealed to protect against dust and moisture during transit.

Compliance & Certifications

• UL60950‑1 safety certification for industrial equipment.
• EMC compliance with CISPR 22 and FCC Part 15B Class A standards.
• Adheres to IEEE networking standards: 802.1D, 802.1Q, 802.1p, 802.1s, 802.1w, 802.1x, 802.3, 802.3ab, 802.3ad, 802.3az, 802.3u, 802.3x, and 802.3z.

Ideal Deployment Scenarios

Industrial Automation

• Robust connectivity for PLCs, SCADA systems, and factory floor devices.
• High reliability ensures minimal downtime in critical processes.

Transportation & Logistics

• Operates reliably in temperature‑controlled environments such as refrigerated trucks.
• Supports real‑time tracking and telemetry for fleet management.

Energy Management

• Low power consumption suits smart grid nodes and renewable energy monitoring stations.

Conclusion

D-Link DIS-200G-12S stands out as a high‑performance, industrial‑grade Layer 2 switch that blends rugged design with advanced networking features. Its extensive VLAN support, link aggregation, and robust security mechanisms make it an ideal choice for sectors demanding uncompromised uptime and secure connectivity in harsh environments.

This product in Comparor
Category This product is cataloged in our store in these categories
International Find this product in one of our international stores	529.48 EUR 568.75 EUR 924.90 CHF 465.00 EUR 546.98 EUR
Colors Predominant colors of the product
Tags	Port and automatically SFP Ports Switch features Surge protection DIS-200G-12S Switch KV surge protection Switch to operate Surveillance devices Surveillance VLAN Detection and cable diagnostics
Identifiers
Brand	D-Link is a Taiwanese networking equipment manufacturer that produces a wide range of products for the consumer, small business, and enterprise markets. Some of their most popular products include wireless routers, switches, and network attached storage devices. D-Link has a strong reputation for quality and reliability, and their products are often praised for their feature-richness and ease of use.
MPN	D-Link DIS-200G-12S
ID	19772573
Dimensions / Weight
Key Features
Copper ethernet cabling technology A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.	10BASE-T,100BASE-TX,1000BASE-T
Electromagnetic compatibility	CISPR 22, FCC Part 15B Class A
Fiber ethernet cabling technology The type of fiber‑optic Ethernet cabling supported by the product, such as 1000BASE‑X, 10GBASE‑LR, or 40GBASE‑SR4. It indicates which standardized fiber media and transceiver combinations are compatible with the device.	1000 BASE
Gigabit Ethernet copper ports quantity Represents the count of physical Gigabit Ethernet (10/100/1000 Mbps) copper interfaces available on a device. The value is an integer indicating how many separate RJ‑45 connectors support Gigabit speeds, regardless of other port types or generations.	10
Housing material Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.	Metal
International Protection IP code The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.	IP30
Management protocols A list of network protocols that a device can use for configuration, monitoring and remote management, such as SNMP, HTTP/HTTPS, Telnet, SSH or other standard interfaces. Each protocol is represented by its common name and may be separated by commas or slashes in the source data.	SNMP v1/v2c/v3, SNTP, Telnet
Mean time between failures	276773 h
Operating temperature The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.	40
Quantity per shipping (inner) case The count of individual units that are packaged together inside a single inner shipping case for transport or sale. It indicates how many separate pieces are included in each case, regardless of product type.	5 pc(s)
Safety A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.	UL60950-1
Security algorithms A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.	802.1x RADIUS,SSL/TLS
Shipping (inner) case gross weight	11200 g
Shipping (inner) case net weight	10370 g
Storage temperature The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.	-40 - 85 C
Switch layer The network layer(s) that a device can operate at, expressed as a string such as "L2", "L3" or combinations like "L2/L3". This attribute indicates the protocol stack level supported by the hardware or firmware.	L2
Switch type The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.	Managed
VLANs	4094