Electrical installation
Suggestions for Electrical installation
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
A robust on/off switch with a 0.5 TE rating, featuring two normally open contacts and rated for 25 A at up to 400 V AC, ideal for controlling high‑current circuits in industrial applications.
Compact 3‑pole breaker delivers 25 A with a Type C trip curve, protecting circuits up to 6 kA. Its sturdy enclosure and rapid reset feature make it suitable for both residential and commercial panel applications.
The Schneider Resi9 RCBO is a 20A Type A Earth Leakage Circuit Breaker with 30mA sensitivity and 6kA tripping characteristic. It offers protection against electrical faults and ensures safety in residential and commercial installations.
Reliable earth‑leakage protection with a 13A, B‑characteristic RCD, 30 mA sensitivity and type A response for single‑phase circuits, ensuring fast disconnection of fault currents up to 6 kA while maintaining continuous operation under normal load conditions.
Siemens 5SV13167KK13 is a 2-pin RCBO with 13 A capacity and leakage current of 0.03 A for 230 V systems. It's an FI/LS protector, Type A, with a sensitivity rating of 30 mA and a single TE unit.
The Siemens 5SV13166KK10 is a high-quality RCBO with a single pin and 10 A rating. It offers optimal protection against earth leakage currents by incorporating a combined Type A and Class-B residual current breaker.
Securely mount a 20‑amp circuit with this 5.2 mm wide PTI installation terminal block, rated from –60 °C to +105 °C, offering reliable grounding connections for industrial setups.
This feed-through terminal block is designed to provide a reliable connection between conductors in electrical circuits. With a 3.5mm pitch and rated for 17.5A of current, it offers excellent performance and durability.
The PTN 16/S N‑disconnect terminal block features a compact 10.2 mm width and a single pole design that delivers secure wire termination with spring‑loaded contacts for reliable connectivity and effortless isolation in industrial control panels.
Compact grey feed-through terminal block delivers 13.5 A capacity with a 3.5 mm pitch, accommodating conductors up to 1 mm². Two positions offer secure push‑in connections, ideal for DIN rail mounting and reliable signal routing.
The Siemens 5SL41256 is a digitally controlled industrial circuit breaker with 1-pin, rated at 25 A, designed for use with both 230 V and 400 V systems.
A compact dual‑pole auxiliary switch with one normally open and one normally closed contact, rated for 2.5 A at 230 V AC, featuring a spring return and side mounting for easy integration into control panels.
A polished white cover plate for Berker R.1/R.3 multi‑pole push buttons, featuring a raised “0” emblem. Its glossy surface resists smudges and blends seamlessly into control panels.
Merten MEG2316‑7214 delivers a hinged, lockable Schuko receptacle with interchangeable closures for tailored protection. The metal housing resists corrosion, while the quick‑release latch simplifies maintenance and its compact profile fits DIN rail mounting.
The Merten System M socket outlet in active white glossy features a hinged cover that locks securely, shielding contacts from accidental touch while providing a durable, CEE 7/3 compliant connection ideal for both home and office environments.
A sleek single‑gang surface‑mounted enclosure in glossy active white, sized 42 × 80 × 80 mm with IP20 protection, perfect for mounting switches on 1‑M or Atelier‑M panels and fitting neatly into control cabinets.
A robust 3‑pole, 35 A selective mains circuit breaker with Cs trip characteristic and 690 V rated isolation, IP20 protection, no neutral switching, ideal for clean, low‑dust installations.
Schneider Electric RXG22BDPV is an interface relay with a switching capacity of 5A and voltage compatibility of AC 0V and DC 0V.
The LogiLink NK4024 is a modular wall socket designed for optical fibre connections. It features an LC duplex plug, making it compatible with various devices that require fiber-optic connectivity.
The HAGER ADS956D RCCB offers reliable protection with a 30 mA sensitivity and a 6 kA rated current. Its C‑6 curve ensures rapid response to fault currents, while the single‑pole design fits standard circuits for safe earth‑leakage detection.
A sleek black plastic push button with a white arrow, 22 mm diameter and momentary action. It features a spring return for quick reset, single normally open contact, and a flat touch surface ideal for panel mounting.
The Schneider Electric ZB5AZ905 is a specialized assembly tool designed for control circuit devices, allowing for easy and precise installation of fastening nuts on control/indicating devices with a diameter of 22mm.
The product is a surge voltage protector from Schneider Electric with model number LA4KE1B. It is designed to protect electrical equipment from voltage surges in the range of 12-24VAC.
A flush‑mounted Delta changeover switch insert, 10 A/250 V, matte metal finish, IP20 rated, optional LED illumination, suitable for up to 0.07 mm depth, featuring a secure screw or clip mounting system.