Electrical installation
Suggestions for Electrical installation
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
Compact two‑channel dimming actuator for KNX bus, supporting 0‑10 V and 0‑24 V input signals, it delivers smooth light level adjustment, integrates seamlessly into SpaceLogic systems, mounts on a DIN rail with 230 V power supply.
Rittal KX 1503.000 is a surface mounted terminal box measuring 300 x 200 x 120 mm with an IP66 rating, made from steel plate in light grey color. It comes with a fitting bracket for wall mounting.
Eltako FSR61-230V Wireless Actuator Impulse Switch with Flush mount design offers a maximum switching capacity of 2000W and a wireless range of up to 30 meters in an open field.
A robust stainless‑steel clamp designed to secure earth rods with diameters of 20–25 mm, providing a reliable, corrosion‑resistant connection for deep grounding systems; its simple clamp design ensures quick installation and long‑lasting performance.
A dependable analogue time switch for 230 V AC circuits, it uses an electromechanical relay with a built‑in power reserve so your schedule stays active even during power cuts, making it ideal for lighting or appliance control in homes and offices.
Securely connect three conductors up to 2.5 mm with this 5.2 mm feed‑through terminal block, rated for 24 A and featuring a spring‑loaded contact that ensures reliable, low‑resistance connections in compact assemblies.
A compact A4 plastic pocket with a 40 mm depth made of durable polystyrene in light gray (RAL 7035) securely holds wiring diagrams, keeping them protected, neatly organized, and easily accessible within any cabinet or workspace.
A compact two‑channel KNX weekly time switch that synchronizes via DCF77 radio, offering precise on/off scheduling for smart homes or buildings with IP20 protection and long service life.
Gray feed-through terminal block with a 12.2 mm pitch and 76 A rating, supplied in a pack of 25 continuity terminals. Designed for robust industrial wiring, it offers compact mounting, high‑current capacity, and reliable contact performance.
Light gray 5‑way push‑in jumper bar rated 41 A, accommodating 0.5–6 mm² conductors with a width of 35.3 mm, height 19 mm and depth 4.1 mm, ideal for quick, secure connections in control panels.
A compact grey triple‑deck feed‑through terminal block, 5.2 mm wide and rated for 24 A, accepts up to 2.5 mm² conductors with a spring‑loaded push‑in mechanism for reliable L/L/L connections.
Power up your space with the Brennenstuhl 1391030400 power extension. Features a durable aluminum casing, four AC outlets, and an easy-to-use switch—all on a convenient 1.8-meter cable for flexible indoor use. Keep everything charged and ready.
Blue WAGO 2016‑1304 feed-through terminal block, 12 mm wide and rated at 76 A, accommodates three conductors from 0.5 to 16 mm², making it ideal for DIN rail mounting in control panels.
The WAGO 2006‑1202 feed‑through terminal block offers a 7.5 mm clamp that grips conductors from 0.5 to 6 mm, delivering up to 41 A with an orange spring‑loaded contact for secure, low‑resistance connections.
Compact grey disconnect terminal block handles up to 17.5 A with a single‑pole knife switch. Suitable for conductors 0.25–1.5 mm², it offers secure isolation and easy cable termination in industrial setups.
Triple‑deck feed‑through terminal block in grey, 5.2 mm pitch, rated 24 A and suitable for conductors up to 2.5 mm². Its compact design delivers a secure, low‑contact resistance connection ideal for industrial control panels.
Bright orange end/partition plate for WAGO 2002 triple‑deck terminal blocks, 0.8 mm thick and 69.5 mm long, providing a secure finish or internal divider with easy mounting.
ELTAKO EUD12D-UC is a digital universal dimmer switch for LED, halogen and incandescent lamps. It has a power surge protection feature and can handle up to 400 watts at 230 volts. The switch is mounted on a DIN rail and is available in blue color.
Brennenstuhl 1156057696 power extension with surge protection and 6 AC outlets, 3 m length, indoor use, aluminum body.
Finder 12.B2.8.230.0000 is a digital time switch with DIN rail mounting, offering astronomical and random timing settings for up to 12 months, with two Wechsler switches, 30A current capability, and 400V/AC voltage compatibility.
A compact Type A earth‑leakage circuit breaker delivers reliable protection with a 16 A rating and 10 mA sensitivity, ensuring rapid interruption of fault currents while maintaining low power consumption for residential and commercial circuits.
The product is an earth leakage circuit breaker with a rating of B16/0.03A and a Type A characteristic. It has a current of 16A and can detect leakage current as low as 30mA.
Compact 3‑pole breaker delivers 20 A with a C‑curve trip, handling up to 6 kA fault currents. Robust housing and a quick‑release lever provide reliable protection for residential circuits.
Secure your wiring with the R9F24132 miniature circuit breaker, offering 32 A capacity and a C‑type tripping curve for moderate load protection. Its compact design fits tight panels while its 6 kA surge handling guarantees reliable fault interruption in residential or light commercial settings.
Secure your circuits with the R9D41616 Earth Leakage Circuit Breaker, offering a 16A rating and 30mA sensitivity for rapid fault detection. Its B‑characteristic type F ensures reliable protection against transient surges while maintaining smooth operation in residential and commercial settings.
Siemens's 5SV60166KK10 AFDD Fuse is a 2-pin, 10A, 230V fuse with a compact design. It features a fire protection switch and LS characteristics for added safety.
ABB F204F‑40/0,03 delivers precise 30 mA protection for four‑phase circuits up to 40 A, featuring a Type F design that tolerates high frequency transients and offers reliable fault interruption on a DIN rail mount.
Compact and robust, this Siemens miniature circuit breaker delivers 10 A protection with a Char‑B curve, handling up to 10 kA fault current on three poles at 400 V, ideal for residential or light commercial circuits.
Discover the Schneider Electric A9MEM2000 energy meter: a reliable 1-phase, 40A solution rated for 230V. Designed to meet class 1 standards with MID compliance, ideal for precise energy monitoring and management in your facility.
