Price from
8.58 EUR

Original MANN-FILTER Oil filter HU 819/1 x – Oil filter set with gasket / gasket set– For Passenger Cars

Height [mm]: 75Inner diameter [mm]: 27Inner diameter 1 [mm]: 27Outer diameter [mm]: 73Supplementary Article/Supplementary Info: with seal

 Stores where to buy this product

Sponsored  This site contains affiliate links for which we may receive compensation. More information

Product Overview

The MANN‑FILTER Oil Filter HU 819/1 x – Oil filter set with gasket is a high‑performance oil filter designed specifically for passenger cars. It comes as a complete set, including the filter cartridge and a gasket, ensuring a reliable seal and optimal protection for the engine’s lubrication system.

Key Features

  • OEM Quality: Manufactured to the exact specifications of the original equipment manufacturer, guaranteeing a perfect fit and uncompromised performance.
  • Durable Construction: The filter media is engineered to retain contaminants while allowing oil to flow freely, extending engine life.
  • Easy Installation: The integrated gasket eliminates the need for additional sealants, reducing installation time and preventing leaks.
  • Wide Compatibility: Suitable for a broad range of passenger cars, including models from Nissan such as the Almera II Hatchback, X‑Trail (T30), Navara (D22), and others.
  • High Flow Rate: Designed to maintain optimal oil pressure and flow, even under demanding driving conditions.
  • Long‑Lasting Seal: The gasket material is engineered to resist oil degradation, ensuring a tight seal over the filter’s service life.

Technical Specifications

ParameterValue
Model NumberHU 819/1 x
Filter TypeOil filter cartridge with gasket set
CompatibilityPassenger cars (Nissan Almera II, X‑Trail T30, Navara D22, etc.)
DimensionsStandard size for OEM fitment (exact dimensions available upon request)
MaterialHigh‑grade filter media and gasket material resistant to oil degradation
Flow RateOptimized for OEM oil pressure specifications
Installation MethodReplace existing filter; gasket automatically seals during installation
ManufacturerMANN‑FILTER, a leading global supplier of automotive filters and fluid treatment solutions

Installation Guide

  1. Prepare the Vehicle: Warm up the engine to operating temperature, then turn it off and allow it to cool slightly. This reduces oil viscosity and improves safety during removal.
  2. Locate the Oil Filter: The filter is typically positioned on the side of the engine block, near the oil pan. Refer to your vehicle’s service manual for exact location.
  3. Drain Excess Oil (Optional): If you prefer, drain a small amount of oil to reduce spillage during filter removal.
  4. Remove the Old Filter: Use a suitable filter wrench to loosen and unscrew the old filter. Be prepared for a small amount of oil to escape.
  5. Inspect the Gasket: Check the old gasket for wear or damage. Replace it if necessary.
  6. Install the New Filter: Place the new filter cartridge onto the mounting surface. The gasket will automatically seat against the oil pan.
  7. Tighten Securely: Hand‑tighten the filter, then give an additional 1/4 to 1/2 turn with a wrench. Avoid overtightening, which can damage the gasket.
  8. Check for Leaks: Start the engine and let it run for a few minutes. Inspect the filter area for any oil leaks.
  9. Dispose of Old Filter: Recycle the old filter cartridge and gasket according to local regulations.

Maintenance Tips

  • Regular Replacement: Replace the filter at every oil change interval recommended by your vehicle manufacturer.
  • Monitor Oil Quality: Check oil color and viscosity regularly; a dirty or thickened oil may indicate the need for an earlier filter change.
  • Use Recommended Oil: Pair the filter with the engine oil type specified in your owner’s manual to ensure optimal filtration.
  • Inspect Gasket Seal: During each oil change, inspect the gasket for signs of wear or cracking.
  • Avoid Overfilling: Do not overfill the engine with oil, as excess pressure can compromise gasket integrity.

Benefits of Choosing MANN‑FILTER HU 819/1 x

The MANN‑FILTER Oil Filter HU 819/1 x delivers a combination of reliability, performance, and convenience. Its OEM design ensures a perfect fit, while the integrated gasket eliminates potential leak points. The filter’s high‑efficiency media captures fine particles, protecting the engine’s bearings and prolonging service life. Whether you’re a professional mechanic or an enthusiast performing DIY maintenance, this filter set provides peace of mind and consistent engine protection.

Compatibility Summary

The filter is engineered for a wide range of passenger cars, with proven fitment on models such as:

  • Nissan Almera II Hatchback (N16)
  • Nissan X‑Trail T30
  • Nissan Navara D22 (pickup)
  • Other Nissan passenger vehicles with matching filter housing dimensions

Conclusion

For drivers who demand engine protection, reliability, and ease of maintenance, the MANN‑FILTER Oil Filter HU 819/1 x – Oil filter set with gasket stands out as a top choice. Its OEM quality, durable construction, and straightforward installation make it an essential component for any passenger car’s lubrication system.


This product in Comparor
Category
This product is cataloged in our store in these categories
International
Find this product in one of our international stores
it
6.76 EUR
es
8.28 EUR
at
8.48 EUR
de
5.86 EUR
be
8.99 EUR
fr
5.40 EUR
Colors
Predominant colors of the product
Tags Vehicle type Engine type MANN-FILTER Oil Filter MANN-FILTER Oil filter HU
Identifiers
Brand Mann Filter

Mann Filter is a German automotive parts company that produces filters for air, fuel, oil, and hydraulic systems. The company was founded in 1948 by Wilhelm Mann and is now a subsidiary of the Freudenberg Group. Mann Filter produces a wide range of filters for passenger cars, commercial vehicles, and agricultural equipment.
MPN Mann Filter HU8191X
Model Mann Filter HU8191X
ID 7067682
Dimensions / Weight
Key Features

Related articles

Bypass valve opening pressure [bar]: 2, 5Height [mm]: 115Inner Diameter 1 [mm]: 62Inner Diameter 2 [mm]: 71Outer Diameter [mm]: 108
Oil filter for transporters, trucks, buses & utility vehicles with anti-return valve, ensuring clean engine oil and optimal performance.
Filter type: Activated Carbon Filter Height [mm]: 46Length [mm]: 199Length 1 [mm]: 213Width [mm]: 217Width 1 [mm]: 229
Bypass Valve Opening Pressure [bar]: 1Height [mm]: 75Inner diameter 1 [mm]: 55Inner diameter 2 [mm]: 62Outer diameter [mm]: 66Part number of the recommended special tools: LS 6/1Supplementary Article/Info 2: wi
Height [mm]: 229Inner Diameter 1 [mm]: 93Inner Diameter 2 [mm]: 104Outer Diameter [mm]: 108Part number of the recommended special tools: Uniclips 11
Bypass valve opening pressure [bar]: 2, 5Height [mm]: 115Inner Diameter 1 [mm]: 62Inner Diameter 2 [mm]: 71Outer Diameter [mm]: 108
🤖 Hello! I'm your virtual assistant. I can help you find products, compare prices and answer questions about your orders. Where should we start?
Chatbot service provided thanks to Gemini 3 / OpenAI using Comparor’s database. The AI may make mistakes — always verify the information.
Comparor AI BETA
Online
Restart the conversation?