Original MANN-FILTER Oil filter W 7034 – For Passenger Cars

MANN‑FILTER W 7034 Oil Filter

The MANN‑FILTER W 7034 is a premium oil filtration solution engineered for passenger cars and light commercial vehicles. Designed with precision engineering, it delivers superior protection for the engine’s lubrication system, ensuring optimal performance and longevity.

Key Features

• High‑Efficiency Filtration: Utilises a multi‑layer media that captures particles as small as 0.5 µm, safeguarding the engine from wear and contamination.
• Robust Construction: Made from durable polypropylene housing with reinforced sealing rings, guaranteeing leak‑free operation under high pressure.
• Easy Installation: Screw‑on design (M22×1.5 mm thread) fits standard oil filter brackets on a wide range of vehicles, including Ford Transit, Tourneo Custom, and other VAG platforms.
• Back‑Pressure Reduction: Optimised flow path reduces resistance, improving engine efficiency and fuel economy.
• Long Service Life: Rated for up to 10 000 km or 12 months (whichever comes first) under normal driving conditions, extending the interval between oil changes.
• Environmental Compliance: Meets EU EN 590 and ISO 3408 standards for oil filter performance and safety.

The W 7034 is specifically engineered to fit a broad spectrum of passenger cars and light commercial vehicles. Below are the primary vehicle families it supports:

For exact fitment, consult the vehicle’s service manual or MANN‑FILTER compatibility chart.

1. Preparation: Warm up the engine to operating temperature and drain existing oil. Keep a clean work area to avoid contamination.
2. Remove Old Filter: Unscrew the current filter using an appropriate wrench. Allow any residual oil to drip into a container.
3. Inspect Housing: Check for cracks or damage; replace if necessary.
4. Apply Sealing Compound: Lightly coat the new filter’s gasket with fresh engine oil to ensure a tight seal.
5. Screw On: Hand‑tighten the W 7034 until snug, then give an additional ¼ turn with a wrench. Avoid overtightening which may damage the gasket.
6. Refill Oil: Reinstall the oil filler cap and add the recommended engine oil quantity.
7. Check for Leaks: Start the engine, let it run for a few minutes, then inspect the filter area for any signs of leakage.

• Engine Protection: By trapping contaminants, the filter reduces wear on bearings, pistons, and camshafts.
• Fuel Efficiency: Lower back‑pressure translates to smoother engine operation and reduced fuel consumption.
• Reduced Maintenance: Longer service intervals mean fewer oil changes and lower overall maintenance costs.
• Consistent Oil Quality: Maintains optimal viscosity and cleanliness, extending the life of the engine’s lubrication system.

The W 7034 features a polypropylene housing that resists corrosion and high temperatures. The filter media consists of a combination of synthetic fibers and activated carbon, providing both mechanical filtration and oil conditioning. The gasket is made from a flexible elastomer that maintains sealing integrity across a wide temperature range.

By extending the interval between oil changes, the W 7034 contributes to reduced oil consumption and lower waste generation. Additionally, its high filtration efficiency helps keep particulate matter out of the engine, which can improve overall vehicle emissions compliance.

• Manufactured in accordance with ISO 9001:2015 quality management standards.
• Tested to meet or exceed EN 590, ensuring compatibility with all standard engine oils.
• Complies with EU Directive 2009/33/EC for automotive filters, guaranteeing safety and performance.

• Always use the recommended oil type specified by the vehicle manufacturer.
• Inspect the filter housing for cracks or deformation before installation.
• Keep a spare W 7034 on hand, especially if you drive in dusty or high‑temperature environments.
• Record each oil change and filter replacement to track service intervals accurately.

The MANN‑FILTER W 7034 Oil Filter stands out as a reliable, high‑performance component for passenger cars and light commercial vehicles. Its advanced filtration technology, durable construction, and ease of installation make it an essential part of any vehicle’s maintenance routine. By choosing the W 7034, owners can trust that their engine receives the protection it needs to perform at its best for years to come.