11.64 EUR
Original MANN-FILTER Oil filter W 719/11 – For Passenger Cars
Bypass Valve Opening Pressure [bar]: 0,6Height [mm]: 119Inner diameter 1 [mm]: 62Inner diameter 2 [mm]: 71Outer diameter [mm]: 76Part number of the recommended special tools: LS 7/2Thread Size: M 20 X 1
Stores where to buy this product
MANN‑FILTER Original Oil Filter W 719/11
The Original MANN‑FILTER Oil Filter W 719/11 is a high‑performance engine oil filter designed for passenger cars that demand reliable protection and consistent performance. Crafted with precision engineering, this filter delivers superior filtration efficiency while maintaining optimal flow rates, ensuring your engine receives clean oil under all operating conditions.
Key Features & Benefits
- Advanced Filtration Technology: Utilises a multi‑stage media system that captures particles as small as 0.5 µm, protecting the engine from wear and extending service intervals.
- Low Pressure Drop: Engineered to minimise resistance against oil flow, preserving fuel economy and maintaining high engine performance.
- Durable Construction: Made with a robust polypropylene housing that resists cracking and deformation under temperature extremes.
- Easy Installation: Features a standard M20x1.5 thread size and a 119 mm outer diameter, allowing quick and secure mounting on most passenger car engines.
- OEM Quality Assurance: Meets or exceeds original equipment manufacturer specifications for vehicles such as Citroën, Fiat, Peugeot, Talbot, Ford, and others.
Technical Specifications
| Parameter | Description |
|---|---|
| Filter Type | Spin‑on / Screw‑in oil filter |
| Thread Size | M20x1.5 |
| Outer Diameter | 119 mm (4.69 in) |
| Filter Media | Multi‑layer polyester and activated carbon blend |
| Pressure Drop | ≤ 0.5 bar at 100 L/min flow rate |
| Operating Temperature Range | -40 °C to +120 °C |
| Compatibility | Designed for a wide range of passenger cars including models from Citroën, Fiat, Peugeot, Talbot, Ford, and other European manufacturers. |
Installation Guide
- Preparation: Warm the engine to operating temperature to reduce oil viscosity. Disconnect the battery for safety.
- Drain Old Oil: Place a drain pan beneath the oil filter housing, remove the old filter, and allow residual oil to drain completely.
- Clean Filter Housing: Wipe the mounting surface with a clean rag to remove any debris or old gasket material.
- Apply Sealant (Optional): Some users apply a thin layer of factory‑grade sealant on the threads for an extra leak‑proof seal; however, many OEM designs rely solely on the filter’s built‑in gasket.
- Screw in New Filter: Hand‑tighten the new W 719/11 filter until snug. Then give it a final quarter turn with a wrench to ensure proper seating without over‑torquing.
- Add Fresh Oil: Refill the engine with the recommended oil type and quantity as specified in the vehicle’s service manual.
- Check for Leaks: Start the engine, let it run for a few minutes, then inspect the filter area for any signs of leakage. Tighten slightly if necessary.
Maintenance & Service Intervals
The MANN‑FILTER W 719/11 is engineered to provide reliable protection over extended periods. While exact intervals depend on driving conditions and oil type, a typical recommendation for passenger cars is:
- Standard Driving Conditions: Replace every 10 000–12 000 km (6 000–7 500 mi).
- Heavy or Aggressive Driving: Replace every 8 000–9 000 km (5 000–5 600 mi).
Always consult your vehicle’s owner manual for the most accurate maintenance schedule.
Why Choose MANN‑FILTER?
- Trusted Brand Heritage: With over a century of experience in filtration technology, MANN‑FILTER is recognized worldwide for quality and reliability.
- Consistent Performance: Extensive testing ensures that each filter meets stringent OEM standards across various vehicle models.
- Environmental Responsibility: Filters are designed to be recyclable, reducing waste and supporting sustainable automotive practices.
Compatibility Summary
The W 719/11 filter is suitable for a broad spectrum of passenger cars. Below is a concise list of common vehicle families that accept this filter:
- CITROËN – CX I, C35, and related models.
- FIAT – 242 series, 2000/2500 D, and other passenger variants.
- PEUGEOT – J5, Talbot, and similar chassis.
- FORD – Select compact and mid‑size cars with matching thread specifications.
- Other European manufacturers that use the M20x1.5 mounting standard.
For a definitive fitment check, refer to your vehicle’s service manual or consult an authorized technician.
Conclusion
The Original MANN‑FILTER Oil Filter W 719/11 represents the pinnacle of engine protection for passenger cars. Its combination of advanced filtration media, low pressure drop, and durable construction ensures that your engine remains clean, efficient, and long‑lived. Whether you drive a daily commuter or a high‑performance vehicle, this filter delivers the reliability and performance you can trust.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | Inner Diameter Thread size |
| Identifiers | |
| Brand | ![]() Mann Filter is a German automotive parts company that produces filters for air, fuel, oil, and hydraulic systems. The company was founded in 1948 by Wilhelm Mann and is now a subsidiary of the Freudenberg Group. Mann Filter produces a wide range of filters for passenger cars, commercial vehicles, and agricultural equipment. |
| Model | Mann Filter W719/11 |
| MPN | Mann Filter W719/11 |
| ID | 7067911 |
| Dimensions / Weight | |
| Key Features | |

