AVer CAM340+ 4K Black Exmor 60 fps Huddle Room Camera with 25.4 / 2.5 mm Lens

This product is cataloged in our store in these categories

Find this product in one of our international stores

Predominant colors of the product

Indicates whether the product includes a built‑in stereo microphone, i.e., a single integrated microphone that captures sound from two channels for higher audio fidelity. A value of "Yes" means such a microphone is present; "No" indicates it is absent.

Specifies the type of interface or mechanism used to secure a cable in its port, such as Kensington, Noble, IBM, or other standard lock slots. This attribute helps users identify compatibility and security features of the device.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The minimum distance at which a camera lens can focus on an object while maintaining sharpness and clarity. It is expressed as a linear measurement (e.g., meters or centimeters) and indicates how close the subject can be to the sensor before the image becomes out of focus.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Represents the total magnification achieved by a camera or imaging device, combining both optical and digital zoom components. The value is expressed as a plain number (optionally followed by an "x" suffix, e.g., 4x or 5.6) without any unit. It indicates how many times the image or field of view is enlarged compared to its original size.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The angular extent that a camera or optical device can capture or display, expressed in degrees. It indicates how wide the field of view is relative to the sensor or lens and helps users understand the coverage area of the device.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The range of audio frequencies that a microphone can accurately reproduce, expressed in hertz (Hz). It indicates the lowest and highest tones the device can capture, helping users assess suitability for recording, broadcasting or communication applications.

The acoustic sensitivity of a microphone, expressed in decibels (dB). It indicates how effectively the microphone converts sound pressure into an electrical signal; lower (more negative) values mean higher sensitivity and better performance at low sound levels.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The physical dimensions of a camera’s image sensor, typically expressed as two measurements (width × height) with units in millimeters and inches. This attribute indicates the size of the sensor that captures light for each frame, influencing resolution, depth‑of‑field, and low‑light performance.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

Indicates whether a product can be securely attached to a tripod using the standard mounting interface. The value is typically "Yes" or "No", and may also include a measurement such as "1/4‑inch” or “3/8‑inch” to specify the size of the mounting screw required.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The set of white‑balance settings available for a camera or imaging device. Each mode adjusts the color temperature and tint to compensate for different lighting conditions (e.g., Auto, Cloudy, Daylight, Flash, Tungsten). The attribute may contain a single value or a list of selectable modes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.