C2G 1.5M RED Cat5e Ethernet RJ45 High Speed Network Cable, LAN Lead Cat5e Unshielded PVC UTP Patch Cable

C2G 1.5M RED Cat5e Ethernet RJ45 High Speed Network Cable

The 1.5‑meter red Cat5e Ethernet cable from C2G is engineered for reliable, high‑speed data transmission in both residential and commercial environments. Designed with an unshielded twisted pair (UTP) construction, this cable delivers consistent performance across a wide range of networking applications.

Key Technical Specifications

• Category: Cat5e – supports up to 1 Gbps data rates at frequencies up to 350 MHz.
• Length: 1.5 meters (4.92 feet) – ideal for short‑range connections such as connecting a computer to a router or switch.
• Connector Type: RJ45 on both ends, fully crimped and tested for optimal signal integrity.
• Shielding: Unshielded (UTP) – suitable for environments with low electromagnetic interference.
• Insulation: PVC – durable, flexible, and resistant to abrasion and moisture.
• Color: Red – provides easy visual identification in cable management systems.

Design Features for Optimal Performance

The cable incorporates a booted design, meaning the connectors are molded into the cable jacket. This eliminates the need for additional crimping tools and ensures a secure, long‑lasting connection. The booted construction also reduces the risk of accidental disconnection during routine maintenance or reconfiguration.

Each pair of wires is twisted at a precise pitch to minimize crosstalk and maintain signal integrity over the entire 1.5 meter run. The PVC jacket provides mechanical protection against bending, crushing, and environmental factors such as temperature fluctuations and humidity.

Applications

• Home Networking: Connect a desktop PC to a home router or switch for high‑speed internet access.
• Office Setups: Short‑distance connections between workstations and network hubs in cubicle environments.
• Data Centers: Use as patch cables within server racks where space is limited and cable runs are short.
• Educational Institutions: Classroom wiring for computers, projectors, or interactive whiteboards that require reliable Ethernet connectivity.

Installation Tips

1. Measure the required distance and cut the cable to size if a longer run is needed; avoid cutting beyond the booted connectors.
2. Ensure both RJ45 ends are properly crimped or use pre‑crimped boots for immediate deployment.
3. Maintain a minimum bend radius of at least six times the cable diameter (approximately 9 cm) to prevent internal damage.
4. Keep the cable away from high‑voltage power lines and sources of electromagnetic interference whenever possible, even though it is unshielded.

Reliability and Durability

The C2G Cat5e cable is built to withstand everyday wear and tear. Its PVC jacket resists abrasion, making it suitable for environments where cables may be frequently moved or routed through tight spaces. The booted connectors provide a robust connection that can endure repeated plug‑in cycles without degradation.

Compliance and Standards

This cable meets the ISO/IEC 11801 standard for generic cabling systems, ensuring compatibility with a wide range of networking equipment. It also complies with TIA/EIA-568-B, guaranteeing that it can be used in both commercial and residential installations without compromising performance.

Maintenance and Longevity

Because the cable is unshielded, routine maintenance involves inspecting for visible damage such as cuts or kinks. If any physical damage is observed, replace the affected segment to maintain optimal network performance. The booted design simplifies replacement, allowing technicians to swap out individual cables without disturbing adjacent connections.

Environmental Considerations

The PVC insulation is rated for a temperature range of -40 °C to +80 °C, making it suitable for indoor applications in climates that vary from cold to hot. Its resistance to moisture and chemicals ensures longevity even in damp or slightly corrosive environments.

Conclusion

The C2G 1.5M RED Cat5e Ethernet RJ45 High Speed Network Cable offers a reliable, high‑performance solution for short‑distance networking needs. Its booted design, robust PVC construction, and compliance with industry standards make it an excellent choice for professionals seeking durability without sacrificing speed or ease of installation.