DeLOCK Serial ATA cable - 30 cm

Introduction

The DeLOCK Serial ATA cable – 30 cm is a compact yet robust solution designed for internal data connections within personal computers, servers, and storage enclosures. Its short length of 0.3 m (30 cm) makes it ideal for tight spaces where longer cables would be unwieldy or could interfere with airflow.

Design & Build Quality

The cable features a straight, rigid construction that resists bending and kinking. The connectors are engineered with high‑precision 7‑pin SATA contacts, ensuring reliable electrical contact even after repeated insertions. The outer sheath is made from durable, heat‑resistant plastic that protects against abrasion and environmental factors.

Connector Details

• Male and female ends are identical in design, allowing the cable to be used between any two SATA devices (e.g., hard drive ↔ motherboard).
• The connectors incorporate a locking mechanism that prevents accidental disconnection during operation.
• Each pin is coated with a thin layer of gold to reduce oxidation and maintain signal integrity over time.

Technical Specifications

• Length: 0.30 m (30 cm)
• Data Transfer Rate: Supports SATA II (3 Gb/s) and SATA III (6 Gb/s) standards.
• Connector Type: 7‑pin Serial ATA (SATA), compatible with both SATA I, SATA II, and SATA III.
• Power Delivery: Capable of carrying up to 1.5 A per pin, sufficient for standard SATA devices.
• Color: Red (for easy identification in cable management).
• Compliance: Meets IEC/ISO standards for data integrity and electromagnetic compatibility.

Compatibility

The DeLOCK 30 cm SATA cable is fully compatible with a wide range of devices, including:

• Desktop and laptop motherboards with SATA ports.
• Internal hard drives (HDD) and solid‑state drives (SSD).
• RAID controllers and storage enclosures that use SATA interfaces.
• All operating systems that support SATA drivers (Windows, Linux, macOS).

Installation Guide

Installing the DeLOCK cable is straightforward:

1. Power off your system and disconnect it from any power source.
2. Locate the SATA port on the motherboard or controller card.
3. Insert one end of the cable into the device’s SATA connector, ensuring a firm click.
4. Connect the other end to the target storage device (HDD/SSD).
5. Secure the cable with cable ties or Velcro straps if necessary to prevent movement.
6. Re‑power the system and verify that the drive is recognized in BIOS/UEFI and the operating system.

Performance & Reliability

The short length of the cable minimizes signal attenuation, ensuring that data integrity remains high even at maximum SATA speeds. The gold‑plated contacts reduce resistance, while the rigid construction prevents mechanical stress that could otherwise lead to intermittent failures. Users report stable operation in both low‑profile and high‑density server environments.

Usage Scenarios

• Compact Builds: Ideal for mini‑PCs, HTPCs, or small form‑factor workstations where space is at a premium.
• Server Environments: Frequently used in rack servers and NAS units to connect drives without cluttering the chassis.
• RAID Configurations: The cable’s reliability makes it suitable for RAID arrays that demand consistent data throughput.

Maintenance Tips

• Avoid Excessive Bending: Although the cable is rigid, repeated sharp bends can damage internal conductors. Handle with care during installation.
• Keep Connectors Clean: Use a dry microfiber cloth to remove dust from the pins before insertion.
• Check for Physical Damage: Inspect the cable periodically; any visible cracks or frays should prompt replacement.

Conclusion

The DeLOCK Serial ATA 30 cm cable delivers a blend of durability, performance, and ease of use. Its short length, gold‑plated connectors, and compliance with SATA standards make it a dependable choice for anyone needing a reliable internal data link in space‑constrained or high‑density computing environments.