Electrical installation
Suggestions for Electrical installation
Ammeter Backbox Conduit Raceway DIN rail Cable tie Fish tape Cable clip Multimeter Outlet box Panelboard RCD tester Cable gland Clamp meter PVC conduit Cable cutter Cable puller Junction box Wire ferrule Consumer unit Crimping tool Wire stripper Cable trunking Conduit bender Terminal block Terminal screw Voltage tester Wire connector Cable connector Circuit breaker Conduit fitting Crimp connector Electrical tape Grounding clamp Heat shrink tube Metallic conduit Continuity tester Electrical outlet Electrical socket Distribution board
Discover the precision of Schneider Electric's XB4BD912R10K potentiometer. Designed for seamless integration with control devices, this single piece ensures accurate and reliable performance in your electrical systems.
Compact and robust, this Siemens miniature circuit breaker delivers 25 A protection with a Char‑B curve for moderate load variations. Its three‑pole design supports 400 V systems, while the 10 kA rating ensures safe interruption of fault currents.
Compact 1‑pole circuit breaker rated 32 A, 230/400 V with a Char‑C response curve and 10 kA surge protection, featuring an IEC‑compliant lightweight housing that offers rapid reset for residential panel applications.
Siemens 5SL41207 - 1 pole miniature circuit breaker with 20 A current rating and C-characteristic for use with 230 V or 400 V systems.
PTIO 1.5/S/3 sensor/actuator terminal block for 2-p 3.5mm connectors, push-lock spring terminal design, grey color, pack of 50, voltage capacity up to 250V.
Eaton EP-501394 is a feeder terminal with a capacity of 25mm², ideal for use in busbars. It comes as a single piece and provides efficient power transmission. ZSD-ESK25-SPZT is another similar busbar terminal that supports 25mm².
Compact dual normally‑closed auxiliary switch designed for modular automation, rated up to 230 V AC, providing reliable isolation and easy integration into control panels with a sturdy, space‑saving build.
The DS201A‑B10/0.01 is a compact earth‑leakage circuit breaker rated at 10 A with 10 mA sensitivity, providing a 6 kA breaking capacity. It mounts on DIN rail and safeguards single‑phase circuits from fault currents.
The Schneider Electric Resi9 Miniature Circuit Breaker is a 1-pole, 20A device with B characteristics and can handle up to 6kA.
Schneider Electric R9F23110 is a miniature circuit breaker with 1 pole, 10 A current rating, and B characteristic. It provides protection against overloads and short circuits in residential or light industrial applications.
White 2-meter power cord with 2x3mm² cross-section, suitable for extending power connections.
Standard actuator for position switches with an angled lever, suitable for various applications.
Double-headed metal push button with two 22mm buttons, one white and one black, in a planar design, providing durable control.
Black cable ties, 4.6mm wide and 150mm long, made for organizing cables and wires efficiently.
Feed-through terminal block with 5.1mm connection and 24A current rating, beige color, for reliable connections.
The Phoenix Contact DT-LAN-CAT.6+ is a surge protection in-line connector designed to provide surge protection for switchboards and networks with RJ45 interfaces.
Protect critical circuits with this robust surge arrester, featuring a 40 kA peak current rating and 15 kA continuous handling, ideal for 3‑phase plus neutral installations in industrial settings.
This cable tie, measuring 3.5mm x 198mm and available in black, is made from high-quality HellermannTyton material with a tensile strength of up to 40lb and comes in a package of 100 pieces.
HellermannTyton 111-12430 T120L-PA66W-BK UV-proof Outdoor Cable Tie is a 7.6mm wide x 760mm long black cable tie with 50 pieces per pack, suitable for outdoor use and resistant to UV damage.
HellermannTyton T150R-HS-NA cable tie is a 365mm long, 7.6mm wide natural color cable tie that is heat resistant and comes in a package of 100 pieces.
WAGO 2009-191 TOPJOB S Group Shield Carrier and Bracket Kit - This product includes a group shield carrier and bracket kit for the domestic switching device, allowing for easy installation and maintenance of electrical systems.
Securely join shielded cables up to 2.5 mm with this single‑pole, 5 mm terminal block that uses a spring‑loaded clamp for firm contact and effortless installation in confined spaces.
Compact two‑channel dimming actuator for KNX bus, supporting 0‑10 V and 0‑24 V input signals, it delivers smooth light level adjustment, integrates seamlessly into SpaceLogic systems, mounts on a DIN rail with 230 V power supply.
Rittal KX 1503.000 is a surface mounted terminal box measuring 300 x 200 x 120 mm with an IP66 rating, made from steel plate in light grey color. It comes with a fitting bracket for wall mounting.
Eltako FSR61-230V Wireless Actuator Impulse Switch with Flush mount design offers a maximum switching capacity of 2000W and a wireless range of up to 30 meters in an open field.
Schneider Electric's VCCD1 emergency stop switch dis connector is a 3-pole, 32A device designed for use in electrical systems requiring safety shut-off mechanisms.
Compact grey disconnect terminal block handles up to 17.5 A with a single‑pole knife switch. Suitable for conductors 0.25–1.5 mm², it offers secure isolation and easy cable termination in industrial setups.
Triple‑deck feed‑through terminal block in grey, 5.2 mm pitch, rated 24 A and suitable for conductors up to 2.5 mm². Its compact design delivers a secure, low‑contact resistance connection ideal for industrial control panels.
Black cable ties, 3.6mm wide and 290mm long, packaged in quantities of 100, for organizing cables and wires.
Black cable ties, 4.5mm wide and 200mm long, for organizing cables and wires, available in packs of 100.
Finder 12.B2.8.230.0000 is a digital time switch with DIN rail mounting, offering astronomical and random timing settings for up to 12 months, with two Wechsler switches, 30A current capability, and 400V/AC voltage compatibility.
A compact Type A earth‑leakage circuit breaker delivers reliable protection with a 16 A rating and 10 mA sensitivity, ensuring rapid interruption of fault currents while maintaining low power consumption for residential and commercial circuits.
ABB F204F‑40/0,03 delivers precise 30 mA protection for four‑phase circuits up to 40 A, featuring a Type F design that tolerates high frequency transients and offers reliable fault interruption on a DIN rail mount.
Compact and robust, this Siemens miniature circuit breaker delivers 10 A protection with a Char‑B curve, handling up to 10 kA fault current on three poles at 400 V, ideal for residential or light commercial circuits.
Eltako S2U12DDX-UC DIN Rail Mount Timer 2-Channel, 230V - Easy installation with DIN rail mounting, controls two channels, operates at 230V.
Bachmann's analogue socket switch clock 852.104 is a 24-hour timer that operates with 3680 watts of power in an IP20 enclosure, designed for continuous use.