Electrical installation
Suggestions for Electrical installation
Ammeter Backbox Conduit Raceway DIN rail Cable tie Fish tape Cable clip Multimeter Outlet box Panelboard RCD tester Cable gland Clamp meter PVC conduit Cable cutter Cable puller Junction box Wire ferrule Consumer unit Crimping tool Wire stripper Cable trunking Conduit bender Terminal block Terminal screw Voltage tester Wire connector Cable connector Circuit breaker Conduit fitting Crimp connector Electrical tape Grounding clamp Heat shrink tube Metallic conduit Continuity tester Electrical outlet Electrical socket Distribution board
Compact Siemens 5SY6316‑6 miniature circuit breaker delivers 16 A protection on three poles with a 6 kA breaking capacity, featuring a Type B curve and integrated neutral switching for reliable overload and short‑circuit safety in industrial settings.
Compact 32A single‑pole circuit breaker with Char‑B curve, rated for 230/400 V and 6 kA interrupting capacity. It features a DIN rail mount, IP20 protection, and reliable overload protection in a small footprint.
Compact 25 A, single‑pole miniature circuit breaker with a 6 kA interrupting capacity. Char‑B design delivers reliable overload and short‑circuit protection for residential or commercial wiring, featuring quick reset.
The HAGER MBN125 is a miniature circuit breaker with a rating of 1 pole, 6kA, and a characteristic of B. It has a current rating of 25A and is designed for use in electrical panels with a width of 1 module.
The Hager GD104N is a surface-mounted distribution board with a width of 180mm, designed to distribute electrical power within a building. It features a compact and sleek design that can be easily integrated into various installations.
The Siemens 5SU1356-6KK06 Switch is a 6 A, 0.03 A, 230 V earth leakage circuit breaker designed to protect electrical circuits from potential hazards.
Earth leakage circuit breaker with 2-pin, 16A, and 0.01A sensitivity for protection against electrical shocks.
Digitus DN-93831 Face Plate for Multimedia / Keystone Modules, Empty Socket for 2 x Keystone Modules
DIGITUS DN-93831 is an empty socket with front panel designed to hold two keystone modules. It can accommodate RJ45 data outlets and comes in white color.
A robust blue feed-through terminal block with 18.5 mm spacing, rated for 150 A and UL 94 V0 flame resistance, featuring side‑mounted connections and two clamps per single layer for reliable high-current wiring.
Miniature circuit breaker with 3-pole and 10A current rating, providing protection against overcurrent and short circuits.
Siemens 5SY6110-6 Miniature Circuit Breaker 10 A, 230 V, 400 V. 1-pole, 6 kA short circuit breaking capacity.
HAGER MBN310 - 3-pole miniature circuit breaker with B characteristic, 10 A current rating, 6kA breaking capacity, and 3 module width.
The Hager ST303 is a versatile bell transformer with power output of 8V/12V and an amperage capacity of 1 A. It operates on 230V AC input, providing reliable energy conversion for doorbells and other devices.
The RKKi 4/15-15x4 is a surface-mounted terminal box with a size of 15x4mm². Manufactured by Spelsberg, it features a plastic grey enclosure measuring 94 x 130 x 57 mm in dimension.
Phoenix Contact PT 6 QUAT feed-through terminal block, 8.2mm width, rated current 41A, color gray, pack of 50 pieces.
End/partition plate for terminal blocks, providing a secure and organized connection point.
Ground terminal block with a single pole and 6.2 mm contact size. Supports up to 32 A per conductor, suitable for 4‑conductor feed‑through applications. Pack of 50 units in yellow/grey or green‑yellow variants.
Discover the WAGO 2002-1407 Ground Terminal Block: A versatile 1-pole terminal block designed for a 5.2 mm pull spring configuration. Rated at 24A and compatible with 2.5mm² wire, this yellow/grey terminal ensures secure connections.
Feed-through double-level terminal block with 3.5mm connection and 16A current rating, ideal for secure and efficient electrical connections.
The PTN 4 neutral disconnect terminal block features a 6.2 mm screw‑type connection, compact 44.8 mm height, lightweight 11.3 g, enabling secure isolation of the neutral conductor in low‑voltage circuits.
Weidmueller CB 368/4.8 BLACK cable tie, 4.8mm x 360mm in black, pack of 100. Strong and durable for reliable strain relief and organization of cables, wires, and hoses in various applications.
Double-level feed-through terminal block with a 5.2mm pitch and 22A rating for up to 2 wires per pole. Suitable for Phoenix Contact's PTTB 2,5-PV series in grey color with double pole clamp for wire cross-section of 0.14mm² - 4mm².
Compact 13 A single‑pole breaker with a Char‑B trip curve, rated at 6 kA for industrial use. Its 70 mm body fits tight spaces while delivering reliable overload protection and fast reset capability.
The Siemens 5SY6106-6 is a 6 A miniature circuit breaker, compatible with both 230 V and 400 V electrical systems. Its compact design incorporates a single pole and a 1-pin connection.
The Phoenix Contact PT 2,5 feed-through terminal block is a 5.2mm quick-connect grey terminal with 24A capability designed for reliable connections in various applications.
Securely connect up to three grounding conductors with the PT 10‑TWIN‑PE ground terminal block, featuring a 10.2 mm wide push‑in design for quick installation and reliable continuity in green‑yellow housings.
Latching relay S12-100-12V by Eltako. 12V AC, impulse switch with 1 Normally Open contact. Electromechanical impulse switch mounted on DIN rail, rated for 10A and 2300W.
A robust, recessed Siemens SIE 5UB1927 offers a 10/16 A, 250 V grounded socket with a durable metal shell and secure locking mechanism for reliable industrial use. Its sleek design fits seamlessly into panelboards or wall mounts while providing easy access to the protected contact point.
Durable Siemens Delta i‑system Schuko outlet delivers 10–16 A at 250 V with secure earthing, robust metal housing and easy installation for reliable household or commercial use.
The STTB 1,5 is a double-level spring-cage terminal block from Phoenix Contact that allows for quick and easy connection of wires with a wire cross-section of up to 4.2mm.
Flush-mounted series switch with device insert, featuring a double switch mechanism and 10A 250V rating.
The AK 16 busbar terminal is a pick-off terminal block designed for use with 16mm² busbars. It features a compact and space-saving design, making it ideal for use in confined spaces or where space is at a premium.
Siemens 3NA3824 NH fuse: 000 size, 80 A, 500 V AC, 250 V AC rating, 3 pieces. Low voltage HRC fuse for 3NA3824.
A sleek, surface‑mounted switch in dark grey or light grey, IP44 rated for heating circuits up to 10 A at 250 V. It features a polished plastic body with optional LED illumination and a simple lever/press action, mounted by screws for easy installation.
Siemens Delta pushbutton device insert (5TD2116) provides flush fitment with continuous light for easy identification and control in electrical systems.
Green push button designed for distribution boards, featuring a non‑latching action with one normally open and one normally closed contact, rated at 20 A, compact size for easy series installation, ensuring reliable control in industrial panels.