Hardware
Suggestions for Hardware
Drill Hammer Jigsaw Mallet C-clamp Crowbar Hacksaw Handsaw Hex key Pry bar Back saw Hole saw Allen key Auger bit Drill bit Miter saw Spade bit Bench vise Box cutter Coping saw Nail punch Try square Claw hammer Cold chisel Drill press Pipe wrench Rotary tool Screwdriver Stud finder Tack hammer Wire cutter Wood chisel Center punch Circular saw Hammer drill Spirit level Tape measure HSS drill bit Impact driver Rubber mallet
Forgefix's CB10200M is a zinc plated carriage bolt and nut, with an M10 x 200mm length. It comes in a bag of 10 pieces for easy handling and storage.
Carriage bolt & nut zp M6 x 130mm bag 10 - Carriage bolt & nut zp M6 x 130mm bag 10 - Carriage bolt & nut zp M6 x 130mm bag 10
Forgefix 5CB12130 Carriage Bolts with Hex Nuts-Zinc Plated-Bag: High quality, zinc plated carriage bolts with hex nuts, in a bag of five, M12 x 130mm length.
Proven reliable Forge Fix technology - Lightweight construction at just 1.06 Kgs - High performace for the home or tradesman
Designed for fitting floorboards - Made of basic raw mild steel material - Rectangular shank type - Available in bright finish - Size: 50 mm length
Forgefix FORC30GB250 Clout Nail, 30mm galvanized with a 250g bag weight. Durable and corrosion-resistant for outdoor use. Suitable for various applications.
Excellent strength and holding power - Annular rings ensure clean insertion - Suitable for soft and hard wood - Available in bright finish - Used where permanent holding is preferred
Secure masonry anchoring made easy with Rawlplug 03/020 Masonry Nails. These high-quality, durable nails come in packs of 100, featuring a 3.0mm diameter and 40mm length for reliable installation into brick and blockwork.
Secure your projects with Rawl R-MNL Masonry Nails—ideal for fixing fixtures to masonry or concrete. Each pack contains 100 nails, each measuring 2.5 x 50 mm, ensuring reliable and strong support every time you work.
Secure your projects with Rawl R-MNL Masonry Nails (100 pcs), featuring a length of 35mm and diameter of 2.5mm for strong, reliable fixing in masonry materials. Perfect for fastening fixtures to brick or block.
Rawlplug 04 004 masonry nails, 2.5mm x 30mm in size with a quantity of 100 pieces. These nails are specifically designed for use on masonry surfaces and come in packs of 100.
Bright finish round head nails, 50 mm long, perfect for framing and trim work. Each bag contains 250 lightweight staples that provide strong, reliable holding power while maintaining a sleek appearance.
Bright 100 mm round‑head nails in a 500 g bag provide a sleek, corrosion‑resistant finish ideal for framing, trim, and general carpentry. Their uniform size ensures smooth driving with any standard nail gun, delivering clean, sturdy joints every time.
Forgefix RH150B500 is a 500g bag of 150mm (6") long bright round head nails with a bright finish, ideal for various DIY and construction projects.
Galvanised round head nail, 125mm in length, packaged in a 500g bag for construction and building needs.
Single thread screw has been designed to offer higher pull out values and quicker insertion - Zinc plated for increased corrosion resistance - Hex head enables higher torque capability when tightening and to increase speed of use with socket drivers - Use
Proven reliable Forge Fix technology - Lightweight construction at just 0.77 Kgs - High performace for the home or tradesman
Coach Screw Hexagon Head Single Thread ZP M8 x 130mm Bag 10 - Coach Screw Hexagon Head Single Thread ZP M8 x 130mm Bag 10 - Coach Screw Hexagon Head Single Thread ZP M8 x 130mm Bag 10
TechFast Baypole Screw with Wafer Head, TORX® compatible, Self-Drilling, 4.8mm diameter x 100mm length, pack of 100.
The ForgeFix TechFast Baypole Screw Wafer Head is a TORX® compatible screw with a length of 4.8mm and a diameter of 80mm, designed for window installations.
Zinc plated for corrosion resistance - Countersunk head for flush fit - Pozidriv head for excellent torque - Fully threaded - Ideal for use in many DIY, ironmongery, electrical and plumbing applications
ForgeFix TechFast Baypole Screw Wafer Head TORX Compatible 4.8 x 60mm Box 100. This screw is designed for window and bay pole installations, featuring a wafer head compatible with TORX drive systems and a self-drilling tip for easy installation.
Zinc plated for corrosion resistance - Countersunk head for flush fit - Pozidriv head for excellent torque - Fully threaded - Ideal for use in many DIY, ironmongery, electrical and plumbing applications
Machine screw pozi pan head zp M4 x 30mm bag 25 - Machine screw pozi pan head zp M4 x 30mm bag 25 - Machine screw pozi pan head zp M4 x 30mm bag 25
Pan head machine screws, zinc plated, 6mm diameter and 30mm long, packaged in a bag of 25.
ForgeFix 25MSPH440 Machine Screw Pozi Compatible Pan Head ZP M4 x 40mm bag of 25. This screw features a pan head and pozi compatible drive, with an M4 diameter and 40mm length, perfect for a range of applications.
Corrugated roofing screws with round head and pozi drive, zinc plated for durability, 5mm x 50mm in size.
General purpose pozi screws with countersunk heads - Zinc plated for increased durability - Pozidriv to allow excellent torque
Countersunk heads for flush fit - Made from A2 stainless steel - Ideal for use in sanitary locations and in marine environments - Have single thread - Designed to offer higher pull out values and quicker insertion
Forgefix MPS675Y is a zinc yellow passivated multi-purpose pozi screw with a length of 6.0mm and diameter of 75mm. It is compatible with CSK ST ZYP and comes in a box of 100.
Multi-purpose screw with zinc yellow passivated coating, compatible with pozi drives and featuring a countersink head for smooth finish.
Forgefix MPS575Y is a multi-purpose Pozi compatible screw with a countersunk head and zinc yellow passivated finish. Made from high-quality steel, it is designed for use in various applications and materials.
Forgefix MPS560Y is a multi-purpose zinc yellow passivated screw with pozi head and countersunk shank, available in size 5.0 x 60mm, pack of 100.
Forgefix MPS5120Y Multi-Purpose Pozi Screw - Zinc Yellow Passivated, compatible with various applications, available in stores.
Stainless steel multi-purpose screw with countersink, 4mm diameter and 25mm length, suitable for various applications.
Filters