Hardware
Suggestions for Hardware
Drill Hammer Jigsaw Mallet C-clamp Crowbar Hacksaw Handsaw Hex key Pry bar Back saw Hole saw Allen key Auger bit Drill bit Miter saw Spade bit Bench vise Box cutter Coping saw Nail punch Try square Claw hammer Cold chisel Drill press Pipe wrench Rotary tool Screwdriver Stud finder Tack hammer Wire cutter Wood chisel Center punch Circular saw Hammer drill Spirit level Tape measure HSS drill bit Impact driver Rubber mallet
Size - Diameter: M4Size - Length: 40 mm Hole Diameter: 8 mm Wall Board Range: 8-15 mm Max Fixture Thickness: 15 mm Pack Quantity: 10
Suitable for temporary or permanent anchorage Ferrule is marked with hole diameter to ensure correct installation Pressed steel segments ensure consistent dimensional accuracy Features optimum taper nut angle for optimum expansion in
All purpose cost effective plug fixing for medium and lightweight applications Profiled body for extra grip Anti-rotation features prevent spinning in the hole Suitable for use in brickwork and concreteideal for shelving, brack
All purpose cost effective plug fixing for medium and lightweight applications Profiled body for extra grip Anti-rotation features prevent spinning in the hole Suitable for use in brickwork and concreteideal for shelving, brack
Product: Rawlplug 69 522 Rawlok - Hexagonal Nut R12070. This is a high-quality hexagonal nut designed to work with masonry anchors. Made from strong and durable materials, it ensures that the anchor stays in place.
Rawlplug R-XPT-20160 is a M20 Zinc Plated through bolt measuring 20mm in diameter and 160mm in length, available in packs of 25.
This product is a set of 25 zinc plated through bolts, specifically the Rawlplug RAWRXPT16150. The bolts are M16 x 150mm in size and have a corrosion-resistant finish.
The Rawlplug R-XPT-12100 is a 12mm x 100mm M12 Zinc Plated through bolt designed for strong fastening in various applications. Made from high-quality steel with a zinc plating finish, this through bolt provides corrosion resistance and durability.
The product is a through bolt measuring 12x80mm with an M12 thread, made from zinc plated steel. It comes in a pack of 50 pieces, suitable for various applications where strong fastening is needed.
Rawlplug R-XPT-08085 is a pack of 100 M8 zinc plated through bolts, measuring 8x85mm each, perfect for anchoring heavy loads to walls or ceilings.
Rawlplug R-XPT-08075 is a high-quality M8 zinc plated through bolt that measures 8mm in diameter and 75mm in length. Made from durable materials, this product features a reliable design that can withstand heavy use.
The Rawlplug R-XPT-08065 is a zinc plated through bolt with an 8mm diameter and a length of 65mm. It is available in a pack of 100 pieces, making it suitable for various construction projects.
The Rawlplug R-XPT-10095 is a zinc plated through bolt with a length of 95mm and an M10 thread. It comes in a pack of 50 pieces, making it perfect for a variety of applications. Its high-quality construction ensures durability and reliability.
M10 zinc plated through bolt, 10mm diameter and 80mm length, for reliable fixing solutions.
Rawl plug R-XPT-X06065 6x65mm M6 Zinc plated through bolt, ideal for use in masonry and concrete applications. Comes in a pack of 100 bolts.
Suitable for the heavier duty tasks such as fixing radiators and wall units All-metal construction for applications which require heat resistance Specialist plasterboard fixing with pozi and slotted combination drive insert Zinc coati
ForgeFix FORSX12129M is a sleeve anchor fixing hex bolt with a length of 129mm and diameter of M12, suitable for use in concrete and masonry. It comes in a bag containing five pieces.
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications Zinc yellow passivated for increased resistance to corrosion Sleeve wedge cones are designed to give maximum expansi
Proven reliable Forge Fix technology Lightweight construction at just 0.75 Kgs High performace for the home or tradesman
Secure closure to doors, gates and cupboards: 2 stabile curtain locks with each 6.5 mm Shackle thickness More safety against opening thanks to Stahlhartem bar High-tech Ießwerk: Rust proof, against remove backup, store, interior tear res
Secure your belongings with the premium Squire LN5 KA lion brass padlocks. This twin pack offers two high-quality, solid brass padlocks with 5-pin cylinders and a 50mm body for optimal protection. Perfect for residential or commercial security needs.
Squire LN4KA Lion Brass Key Padlock - 39.5mm, Durable and reliable padlock with a 5-pin brass cylinder, perfect for securing gates, storage units or lockers. Twin pack available.
Forgefix's FORCSK346Z is a general-purpose screw that fits most applications. Made of high-quality steel and designed with a pozidriv head, it comes in a box containing 200 pieces.
The Defender DFAW80 is a heavy-duty armoured warehouse block padlock with a grey shackle, measuring 80mm in length. It provides strong security for warehouses and other large buildings.
The ABUS Silver Rock Padlock is a 40mm lock with a 63mm long shackle and keyed alike. It features the Silver Rock™ 5 mechanism and comes in key number ABUKA80882.
Proven reliable Forgefix technology Lightweight construction at just 0.8 Kgs High performace for the home or tradesman
Sitching screw designd for light sectional steelwork A coarse self tapping thread with a tapered shank Plated with silver ruspert
TIMco WMN75 washered masonry nails, 3.7x75mm, pack of 50. Suitable for use in brick and stone work. Durable and reliable.
Excellent strength and holding power Annular rings ensure clean insertion Suitable for soft and hard wood Available in bright finish Used where permanent holding is preferred
Paper collated nails with clipped head and diamond point head for maximum penetration Plain shank for low penetraion resistance into all materials Firma Galv Plus finish, electro galvanised plating with 12 microns of zinc Conforms to e
Pan head eliminates the pull and indentation caused by countersunk heads Free T25 driver bit included T25 TIM drive recess to reduce driver wear and prevent cam out Serrated V-threads to achieve optimum insertion into all masonry type
Large surface area suitable for heavy duty fastening.Bright zinc plated for increased corrosion resistance.Zinc Plated.
Stainless steel hex nuts in M10 size, pack of 100, made from A2 stainless steel for durability and resistance.
Proven reliable Forgefix technology Lightweight construction at just 0.79 Kgs High performace for the home or tradesman
Proven reliable Forgefix technology Lightweight construction at just 0.8 Kgs High performace for the home or tradesman
Proven reliable Forgefix technology Lightweight construction at just 0.62 Kgs High performace for the home or tradesman
Filters