Hardware
Suggestions for Hardware
Drill Hammer Jigsaw Mallet C-clamp Crowbar Hacksaw Handsaw Hex key Pry bar Back saw Hole saw Allen key Auger bit Drill bit Miter saw Spade bit Bench vise Box cutter Coping saw Nail punch Try square Claw hammer Cold chisel Drill press Pipe wrench Rotary tool Screwdriver Stud finder Tack hammer Wire cutter Wood chisel Center punch Circular saw Hammer drill Spirit level Tape measure HSS drill bit Impact driver Rubber mallet
Arrow clear insulated staples are specifically designed for hardwood with a width of 5mm and length of 12mm, available in a pack of 300.
High performance No.53 staples, 14 mm leg length, for professional and trade users, for work with textiles and fabrics, designed for permanent fastening, labelling and upholstery work - Outdoor use thanks to rust resistant galvanised surface, 14 mm leg le
High performance No.140 staples, 14 mm leg length, for professional and trade users, for building and insulation work involving skirting, fastening plastic sheeting and flyers - Outdoor use thanks to rust resistant galvanised surface, 14 mm leg length, 10
Rapid 53/8B 8mm Galvanized Staples - Pack of 5000. Durable, rust-resistant staples for various applications. Box of 5000.
Trend chamfer V groove router cutter with a diameter of 16mm, available in sizes of 1/4 inch and 8mm. It provides an angled groove for decorative edges on wooden surfaces.
TREND 4/27X1/2TC, a two flute straight router cutter with a 16mm diameter and 25mm cutting length, suitable for various materials including wood, plastic, and metal.
Faithfull Farmer's Silage Tape, 75mm x 20m: durable black polyethylene tape for securing and protecting silage bales or wraps. Easy-to-use, long-lasting, and suitable for various agricultural applications.
Sealing joints, voids and irregular holes in fire walls - For internal perimeter pointing of fire-rated door and window frames - Resist the passage of fire for up to five hours - Fast cure--tack free in 15 minutes - Can be overpaintable
1.7mm thick 30mm outside diameter reducing washer with 25mm internal bore. - Allows 30mm bore blades with 1.7mm thick plates to be fitted to compatible saws with 25mm spindle fittings. - For use with 250mm diameter Craft Pro blades. - Precision reamed fo
1.1mm thick 30mm outside diameter reducing washer with 16mm internal bore. - Allows 30mm bore blades with 1.1mm thick plates to be fitted to compatible saws with 16mm spindle fittings. - For use with up to 180mm diameter Craft Pro blades. - Precision rea
The Trend Craft Bush Washer is a versatile, precision-engineered tool designed to fit and reduce the diameter of various saw blades. With a 30mm internal diameter and 1.7mm thickness, it accommodates both 20mm and 15mm wide blade shanks.
Ergonomic soft grip handle for added user comfort - Made from chrome vanadium steel blades - Hardened and tempered for added strength - Spinner socket is fitted with a hex - Ideal for when more torque is required
DeWalt Standard Nails for DCN890 Concrete Nail Gun 50mm Pack of 510. 2.6mm x 50mm nails, ideal for use with cordless nail guns. Suitable for anchoring in concrete, masonry or drywall. Multi-Coloured packaging.
DeWalt XH Extra Hard Nails for DCN890 Cordless Concrete Nail Gun 32mm Pack of 1005 - ideal for anchoring and fastening applications.
The Tork compact dispenser is suited for any type of washroom with medium- to high-traffic and establishments focusing on their guest satisfaction - With its capacity of up to six times more than 2 conventional toilet rolls, the toilet paper holder is hig
Wooden dowels with expanding glue slots and lateral ribs for optimum fitting accuracy. - 100% rotation-proof right from the first Domino. - Dimensions 8x40 mm, 130 pieces
Fluted dowel pegs - Brad point drill bit - Drill stop collar; hex key - Dowel centre points - Dowel peg size: 8mm
Fluted - Air dried beechwood. - Used for making secure joints - Hardwood - Pack of 72
Fluted - Air dried beechwood. - Used for making secure joints - Hardwood - Pack of 50
Fluted - Air dried beechwood - Used for making secure joints - Hardwood - Pack of 35
Hook set for use with APSBP pegboard. - Suitable for hanging tools to keep them clear of the worktop, yet close to hand.
Spare grommets - Suitable for trades and the enthusiast - Manufactured with quality in mind and comes with Draper guarantee - Spare grommets - Suitable for trades and the enthusiast - Manufactured with quality in mind and comes with Draper guarantee
Roofing bolts and hex screwdriver bits for various tasks, available in different sizes and packs.
For interior and exterior only - Long lasting repair, extremely smooth finish - Ronseal applicator included, buttery texture - For use in repairing plaster, stone, concrete or wood
Everbuild's One Strike Filler is a 250ml decorating filler designed for quick and easy repairs. It provides excellent coverage, adhesion, and durability, making it perfect for various surfaces including plaster, wood, and metal.
For use with draper staplers and combination stapler/nailer and other manufacturer's similar machines - Size: 13.0 mm x 5.1 mm x 0.6 mm - Weight: 0.714 kg
Extremely practical hot stapler - Fitted with a control switch and multi-coloured LED indicator - Designed for the restoration of plastic parts
Draper's insulated cable staples are designed for use with the 01043 wiring tacker. These staples are made from steel and have a coating that provides insulation, making them safe to use around electrical wires.
An easy way to achieve a more professional tiling finish. - Ensure a constant and even spacing of tiles, allowing for the specified size in grout line. - Easily breakable legs for T-shape spacers. - Allow for a 2mm grout line. - Supplied in a re-sealable
Large head distributes load - Ensures roof felt stays firm and secure - Reduced risk of tearing - Galvanised for corrosion resistance - Suitable for roofing of all types
Single threaded decking screws have pozidriv heads - Green treated corrosion resistance - Design reduces risk of splitting the boards - Allows boards to expand and contract with the changing seasons - Specifically used in Decking applications but also wid
TechFast Baypole Screw with Wafer Head, TORX® compatible, Self-Drilling, 4.8mm diameter x 100mm length, pack of 100.
Wafer head self-drilling baypole screws, 4.8 x 70mm, with TORX compatible drive and box of 100 for window installation.
ForgeFix TechFast Baypole Screw Wafer Head TORX Compatible 4.8 x 60mm Box 100. This screw is designed for window and bay pole installations, featuring a wafer head compatible with TORX drive systems and a self-drilling tip for easy installation.
Number plate fasteners self tapping with flip caps. - Colour: Black. - Screw Size: 4.2 x 19mm Pan Head Pozi. - Supplied in resealable bag.
Countersunk heads for flush fit - Made from A2 stainless steel - Ideal for use in sanitary locations and in marine environments - Have single thread - Designed to offer higher pull out values and quicker insertion
Filters