16.66 GBP
MicroConnect MONCC2 Cable Adapter
High-quality workmanship and materials. - Genuine Micro Connect Product - 100% brand new with warranty
Stores where to buy this product
GamingKit
MicroConnect MONCC2 Cable Adapter
The MicroConnect MONCC2 Cable Adapter is a high‑performance DVI‑D (Dual Link) cable designed to deliver crystal‑clear video signals up to 2560 × 1600 pixels at 60 Hz. With its robust construction and precise engineering, this adapter guarantees reliable connectivity between modern displays and graphics cards that support Dual Link DVI output.
Key Technical Specifications
- Connector Type: 24‑pin DVI‑D (Dual Link) on both ends (M‑to‑M)
- Length: 2 m (6.56 ft)
- Maximum Resolution: Full HD 1080p, Ultra HD up to 2560 × 1600 @ 60 Hz
- Signal Integrity: Dual Link architecture for double the bandwidth compared to Single Link DVI
- Shielding: Fully shielded cable with high‑quality braided shielding to minimize EMI/RFI interference
- Construction: Moulded, reinforced core with eye‑screw (Daumenschrauben) for secure attachment and reduced strain on connectors
- Color: Black finish for a sleek, professional look
Design & Build Quality
The MONCC2 cable features a rigid, moulded core that resists kinks and bends, ensuring longevity even in demanding environments. The connectors are engineered with precision to provide a snug fit, reducing the risk of loose connections or signal loss. Eye‑screw (Daumenschrauben) design allows for easy mounting on desks or workstations without compromising cable stability.
Performance & Signal Integrity
Dual Link DVI delivers twice the data bandwidth of Single Link, enabling higher resolutions and refresh rates. The MONCC2 cable’s high‑quality shielding protects against electromagnetic interference (EMI) and radio frequency interference (RFI), preserving signal clarity over its 2 m length. Users report consistent performance even when connecting high‑resolution monitors or HDTVs.
Compatibility Overview
The MONCC2 cable is compatible with any device that supports DVI‑D (Dual Link), including:
- Desktop graphics cards with Dual Link DVI output
- All‑in‑one PCs and laptops featuring a 24‑pin DVI port
- Professional monitors, HDTVs, and projectors that accept DVI‑D input
- Video capture devices and external video interfaces with Dual Link support
Installation & Setup Guide
- Connect the first end: Insert one 24‑pin connector into the DVI‑D output of your graphics card or source device.
- Secure the connection: Tighten the eye‑screw to ensure a firm fit and prevent accidental disconnection.
- Connect the second end: Insert the other 24‑pin connector into the DVI‑D input of your monitor or display.
- Power on devices: Turn on both source and display. The cable should automatically transmit the video signal without additional configuration.
Troubleshooting Common Issues
| Issue | Possible Cause | Solution |
|---|---|---|
| No image or black screen | Single Link mode enabled on source device | Enable Dual Link in graphics settings or use a Dual Link capable card. |
| Intermittent signal loss | Loose connector or damaged cable | Tighten eye‑screw, inspect for physical damage, replace if necessary. |
| Reduced resolution or refresh rate | Cable length exceeding recommended limit for high bandwidth | Use a shorter cable or upgrade to a higher quality Dual Link cable. |
| Signal interference (noise) | Insufficient shielding or nearby EMI sources | Move cable away from power cables, use shielded extension if needed. |
FAQs
- Is the MONCC2 compatible with DVI‑A (analog) devices?
- No. The cable is strictly for digital DVI‑D (Dual Link). Analog connections require a separate adapter.
- Can I use this cable in a laptop docking station?
- If the docking station provides a 24‑pin Dual Link DVI output, it will work seamlessly.
- What is the maximum supported resolution at 60 Hz?
- The cable supports up to 2560 × 1600 pixels at 60 Hz. For higher resolutions or refresh rates, a higher bandwidth interface such as HDMI 2.0 or DisplayPort may be required.
- Does the cable support audio transmission?
- No. DVI does not carry audio signals; an additional audio connection is needed if audio output is required.
Why Choose MicroConnect MONCC2?
The MicroConnect MONCC2 Cable Adapter combines durability, high‑bandwidth performance, and a user‑friendly design. Its 2 m length offers flexibility in workstation layout while maintaining signal integrity. Whether you’re setting up a multi‑monitor workstation, connecting a professional display to a workstation PC, or linking a high‑definition TV to a graphics card, this cable delivers reliable, crisp video output every time.
Conclusion
For professionals and enthusiasts who demand uncompromised video quality over a standard DVI‑D interface, the MicroConnect MONCC2 Cable Adapter stands out as a dependable choice. Its robust construction, precise engineering, and proven performance make it an essential component in any high‑resolution display setup.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- DVI Cables |
|
International
Find this product in one of our international stores
|
 15.41 EUR |
| Colors
Predominant colors of the product |
|
| Tags | 2m DVI-D |
| Identifiers | |
| Brand |  MicroConnect is a brand that specializes in making high-quality, reliable connectors and cables. Their products are used in a variety of industries, including medical, automotive, and industrial. They are known for their customer service and support, as well as their innovative products. |
| MPN | MicroConnect MONCC2 |
| ID | 21729336 |
| Dimensions / Weight | |
| Key Features | |
Related articles
