ML30 GEN10 MINI SAS CABLE STOCK

Product Overview

The ML30 GEN10 MINI SAS CABLE STOCK is a high‑performance, internally mounted cable designed specifically for the Hewlett Packard Enterprise ProLiant ML30 Gen10 server family. It provides reliable data transfer between the server’s internal storage devices and the motherboard using the Serial Attached SCSI (SAS) interface.

Key Features

• Compatibility: Tailored for ProLiant ML30 Gen10 models, including the Entry, Performance, and Solution variants.
• Connector Type: Male-to-male (M/M) Mini‑SAS connectors that fit seamlessly into the server’s internal layout.
• Build Quality: Constructed with durable shielding to minimize electromagnetic interference and ensure stable signal integrity.
• Length & Flexibility: Optimized length for tight rack spaces, yet flexible enough to accommodate cable routing within the server chassis.
• Data Rate: Supports up to 12 Gbps per lane, enabling fast communication between SAS drives and the host bus adapter.
• Hot‑Plug Capability: Designed for hot‑plug environments, allowing drive replacement without server downtime.
• New Condition: The cable is brand new, guaranteeing no wear or degradation from prior use.

Technical Specifications

Installation Guide

1. Power Down: Shut down the server and disconnect all power sources to ensure safety.
2. Access the Chassis: Remove the side panel of the ML30 Gen10 chassis following standard procedures.
3. Locate the SAS Port: Identify the internal Mini‑SAS port on the motherboard where the cable will terminate.
4. Insert Cable: Align the male connectors with the corresponding ports and gently push until fully seated. Ensure a firm connection without forcing.
5. Secure Routing: Use the provided cable ties or internal routing guides to keep the cable organized and prevent strain on the connectors.
6. Reassemble: Replace the side panel, reconnect power, and boot the server.
7. Verify Functionality: Check system logs for SAS link status; a successful connection will appear as “SAS Link Up” with the appropriate speed.

Performance Benefits

By employing the ML30 GEN10 MINI SAS CABLE STOCK, administrators can achieve:

• Reduced Latency: Direct, high‑speed links between drives and controller reduce data path length.
• Increased Throughput: Full utilization of the 48 Gbps bandwidth allows simultaneous read/write operations across multiple drives.
• Enhanced Reliability: Shielded construction mitigates signal degradation, leading to fewer errors and lower maintenance.
• Scalability: The cable supports future upgrades to higher‑capacity SAS drives without requiring new cabling.

Maintenance & Troubleshooting

Regular checks should include:

• Inspecting connectors for dust or debris; clean with a dry, lint‑free cloth if necessary.
• Verifying cable tension to avoid excessive bending that could damage the internal wiring.
• Monitoring SAS link status in the server BIOS or operating system; any “Link Down” events warrant immediate inspection of the cable.

Conclusion

The ML30 GEN10 MINI SAS CABLE STOCK is an essential component for maintaining optimal performance and reliability in ProLiant ML30 Gen10 servers. Its precise design, robust construction, and compatibility with HPE’s high‑end storage solutions make it a reliable choice for data centers seeking efficient internal connectivity.