Gear track | Motor
The Sealey AK419 is a 189mm x 125mm x 20mm battery terminal puller designed to assist in the removal and installation of battery terminals.
TrueForce sim racing wheel with 1000Hz pedals and gear shifter, compatible with PlayStation and PC.
Wall or floor anchor - Weather resistant - Hardened special steel - Extra wide shackle - Can be used indoors and outdoors
The Sealey PS989 bearing separator is a tool designed for separating bearings and gears. It measures 311mm x 233mm x 39mm, has a size range of 105-150mm, and is suitable for use with bearings and gears ranging from 120mm to 150mm in size.
Suitable for use with our lever hoists or chain blocks Designed for mounting onto an I-beam or raj to allow load to be manoeuvred sideways Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer
Dispensing Method: Aerosol - Volume: 400ml - Colour: White - Lubricant Applications: House Hold, Mechanical
Manufactured from high quality stainless steel with a fully polished satin finish.Length: 85mm.72-Tooth, ultra-smooth ratchet with slide reverse.Additional drive at the base of handle.Ideal for limited access applications.
Rocol Tuflube All Weather Open Gear Lubricant is a high-performance lubricant designed for use in harsh weather conditions. The 400g tube provides long-lasting protection against wear and tear, making it ideal for industrial applications.
Forged steel jaws.Suitable for removing bearings, gears and bushes from shafts.
Ideal for other liquids such as water and soluble oil. - Supplied with Ø5.8 and Ø6.7mm sprung steel lined suction probes and a Ø9.8 x 1m extension tube. - To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle
Size: 78mm x 100mm - Material: Forged Carbon Steel - Supplied with twin and triple yoke - With Chemically Blacked Finish - Item Weight: 1.24 Kg
Capacity: 10.5ltr - Length: 572mm - Width: 330mm - Height: 292mm - Fabricated steel container with powder coated finish and spring-cap lid - Rotary type pump, with clear plastic tube, delivers and retrieves oils and fluids - Fitted with rigid extension an
Minimum/Maximum Size/Spread: 40/93mm - Height: 46mm - Width: 275mm - Length: 209mm
Sealey PS987 bearing separator, 144mm x 166mm x 26mm; ideal for removing bearings and gears from various applications.
Swivel thrust plate prevents damage to shaft ends - Size/Spread: 115mm - Reach: 100mm - Height: 65mm - Width: 165mm
Manually operated oil dispensing unit manufactured from composite materials - Large visual measurement will identify amount dispensed - Supplied with a range of five automatic transmission fluid adaptors - Delivers approximately 70ml per stroke - Capacity
The Sealey PS9821 is a hydraulic bearing separator and puller with dimensions of 324mm x 423mm x 79mm, available in red. It's designed for efficient separation and removal of bearings from their hubs or shafts without damaging them.
High quality - Adjustable two or three leg function - Six position multi-function puller - Part Number:50094
Drop-forged, Chrome Vanadium steel reversible legs. - Swivel thrust plates on larger sizes prevent damage to shaft ends. - Hex head forcing screws suitable for use with a ratchet or spanner. - Size/Spread: 75, 100, 150mm.
Sealey VS70096 is a 5-liter transmission oil filling system that makes changing the gearbox oil quick and easy. Its precision metering ensures accurate refills, while its ergonomic design minimizes strain during use.
Wera's Zyklop speed reversible ratchet features a 1/2 inch drive and a switch lever for easy use. Its length is 277mm and it has a socket size of 12.5mm.
Diesel engine setting and locking kit for VW 2.5D TDi PD with gear drive, ideal for precise timing tool adjustments.
Gates (5414465039799 / KP15580XS) | OE Quality Warranty
Length [mm]: 1305 - Number of Teeth: 137 - Pulleys contained: 2 - Width [mm]: 25
Shimano Dura-Ace RS900 Road gear cable set, Polymer coated inners, black
This hand winch with strap by Vidaxl is designed to handle loads up to 1130 kg. It features a durable construction and comes with an attached strap for easy use.
The vidaXL Bearing Puller Set includes 14 pieces of pullers designed for easy removal of bearings from various applications.
The vidaXL Bearing Puller Set includes 14 pieces of pullers designed for easy removal of bearings from various applications.
The vidaXL Universal Timing Pulley Puller is an adjustable tool designed to remove timing pulleys with ease. Its adjustable range from 42mm to 82mm makes it suitable for a wide variety of applications.
The vidaXL Universal Timing Pulley Puller is an adjustable tool designed to remove timing pulleys with ease. Its adjustable range from 42mm to 82mm makes it suitable for a wide variety of applications.
The febi bilstein 05052 Differential Mounting is a high-quality replacement part for your vehicle's rear axle. Made by Febi Bilstein, this pack of one ensures smooth and efficient performance while driving.
The febi bilstein 05052 Differential Mounting is a high-quality replacement part for your vehicle's rear axle. Made by Febi Bilstein, this pack of one ensures smooth and efficient performance while driving.
Sparco (6922516302772 / SPC0105CH)
Filters