StarTech USB 3.0 to SATA III External Solid State Drive
StarTech (8944467777568 / SM2NGFFMBU33) - USB - Asmedia - ASM1153 - SSD enclosure - M.2 - Micro-USB B - Certification: FCC, CE, TAA, REACH - Data transfer rate: 6 Gbit/s - Depth: 100 mm - Height: 15 mm
Stores where to buy this product
Similar products
StarTech USB 3.0 to SATA III External Solid State Drive
The StarTech USB 3.0 to SATA III External Solid State Drive is a premium, lightweight enclosure designed specifically for M.2 SSDs. Crafted from high‑grade aluminum, it delivers robust protection while maintaining an ultra‑compact footprint.
Key Design Features
- Material & Build: Premium aluminum chassis ensures durability and excellent heat dissipation. The enclosure measures 35 mm wide, 15 mm high, and 100 mm deep, weighing only 50 g.
- Compact Form Factor: Ideal for portable setups; the slim profile fits easily into laptop bags or travel cases.
- Precision Engineering: The internal mounting system accommodates M.2 SSDs of lengths 30 mm, 42 mm, 60 mm, and 80 mm, ensuring a secure fit for most modern drives.
- Integrated Screws & Tools: Comes with a precision screwdriver and all necessary screws to install the SSD without additional tools.
Connectivity & Performance
- USB Interface: Equipped with a single USB 3.0 (Gen 1) Type‑B port, delivering up to 6 Gb/s data transfer rates.
- UASP Support: The enclosure supports USB Attached SCSI Protocol (UASP), providing faster command queuing and reduced latency for high‑performance SSDs.
- Chipset Excellence: Powered by the ASMedia ASM1153 controller, known for its low power consumption and reliable data integrity.
- Power Source: Operates solely via the USB connection; no external power supply required.
- USB Cable: Includes a dedicated USB cable (Type‑B to Micro‑USB B) for direct connectivity.
Compatibility & Supported Devices
- Drive Type: Designed exclusively for M.2 SSDs, supporting SATA III interface drives.
- Interface Compatibility: The enclosure accepts the standard SATA 6 Gb/s (22‑pin) connector found on M.2 SSDs.
- Operating Conditions: Rated for storage temperatures between -10 °C and +85 °C, and operational temperatures from 0 °C to 40 °C. Humidity tolerance ranges from 5 % to 95 %.
- Regulatory Compliance: Meets international standards including FCC, CE, TAA, REACH, and RoHS, ensuring safe operation across global markets.
User Experience & Setup
Setting up the enclosure is straightforward. Insert the M.2 SSD into the slot, secure it with the provided screws, attach the USB cable, and connect to any USB 3.0 port. The device is instantly recognized by operating systems such as Windows, macOS, and Linux without additional drivers.
The enclosure’s aluminum construction not only protects the SSD from physical shocks but also aids in passive cooling during intensive read/write tasks. Users report negligible heat buildup even under sustained workloads.
Technical Specifications Summary
| Specification | Details |
|---|---|
| Dimensions (W×H×D) | 35 mm × 15 mm × 100 mm |
| Weight | 50 g |
| USB Version | 3.0 (Gen 1) |
| Data Transfer Rate | Up to 6 Gb/s |
| UASP Support | Yes |
| Chipset | ASMedia ASM1153 |
| M.2 SSD Lengths Supported | 30 mm, 42 mm, 60 mm, 80 mm |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -10 °C to +85 °C |
| Humidity Range | 5 % to 95 % |
| Compliance | FCC, CE, TAA, REACH, RoHS |
Conclusion
The StarTech USB 3.0 to SATA III External Solid State Drive stands out as a reliable, high‑performance solution for users who require portable access to M.2 SSDs. Its combination of lightweight aluminum construction, UASP‑enabled connectivity, and comprehensive regulatory compliance makes it an excellent choice for professionals, gamers, and everyday consumers alike.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Hard drive enclosures |
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | Solid state drive Drive Sata iii solid state drive USB 3.0 Drive SATA III drive External Drive External Solid State Drive USB 3.0 External Solid State Drive External Solid State Drive USB 3.0 Usb 3.0 solid state drive External USB 3.0 Solid State Drive Usb 3.0 external drive Sata iii external drive Solid state external drive Usb 3.0 sata iii drive Usb 3.0 solid state external drive Startech usb 3.0 drive Startech sata iii drive Startech external drive Startech solid state drive Startech usb 3.0 external drive Startech sata iii external drive |
| Identifiers | |
| Brand | StarTech Startech is a brand that specializes in computer and electronic accessories. They make a wide range of products, from cables and adapters to docking stations and external hard drives. Their products are known for their quality and durability, and they offer a wide range of options to suit a variety of needs. |
| Model | StarTech SM2NGFFMBU33 |
| MPN | StarTech SM2NGFFMBU33 |
| ID | 1997165 |
| Dimensions / Weight | |
| Key Features | |
|
Cables included A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.
|
USB |
|
Certification A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.
|
FCC, CE, TAA, REACH |
|
Chipset El chipset es el conjunto de circuitos integrados que controla la comunicación entre la CPU, la memoria y los dispositivos periféricos en una placa base. Indica la familia de soporte del procesador y las características disponibles, como número de puertos SATA, tipos de ranuras PCIe y compatibilidad con memorias.
|
Asmedia - ASM1153 |
|
Data transfer rate The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.
|
6 Gbit/s |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
100 mm |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
15 mm |
|
Manual Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.
|
Yes |
|
Number of storage drives supported The total count of individual storage drives that a product can accommodate or support. This includes internal and external hard disks, solid‑state drives, or other removable media devices. The value is an integer representing how many separate drive units the system can host, install, or connect.
|
1 |
|
Package depth The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.
|
131 mm |
|
Package Height The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.
|
31 mm |
|
Package width The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.
|
163 mm |
|
Product Type Indicates the general classification or type of an item, such as "laptop", "projector", "router" or "paint". It helps users quickly identify the nature of the product and compare similar items across categories.
|
SSD enclosure |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Screws included Indicates whether the product comes with the necessary screws included in the package. A value of "Yes" means that screws are supplied, allowing the user to assemble or secure the item immediately after unpacking; a value of "No" means no screws are provided and must be purchased separately.
|
Yes |
|
Storage drive size A list of the physical drive sizes that are compatible with the product, such as "2.5"", "3.5"", and "M.2". This attribute helps users determine which external or internal drives can be used with the device.
|
M.2 |
|
UASP support Indicates whether the device supports UASP (USB Attached SCSI Protocol), which allows faster data transfer over USB by reducing CPU overhead and improving performance for storage devices.
|
Yes |
|
USB connectivity Indicates whether the product has a USB interface for data transfer or power delivery. A value of "Yes" means at least one USB port is present; "No" indicates no USB ports are available.
|
Yes |
|
USB connector type The specific type of USB connector used by a device, such as USB Type‑A, USB Type‑B, USB Type‑C, Micro‑USB, Mini‑USB, or other variants. It indicates the physical port that allows data transfer and power delivery between the device and peripherals.
|
Micro-USB B |
|
USB Version The specific version of the USB standard that a product supports, expressed as a generation number and optional descriptive suffix (e.g., "3.2 Gen 1" or simply "3.0"). This attribute indicates the data‑transfer capabilities and compatibility with USB devices.
|
3.2 Gen 1 (3.1 Gen 1) |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
50 g |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
35 mm |





