StarTech.com 22U Adjustable-Depth Open-Frame Four-Post Server Rack Cabinet
The StarTech.com RK2236BKF is a 22U, four-post equipment rack designed to support servers, networking hardware, and other compatible rack-mount equipment. Its adjustable mounting rails accommodate different equipment depths, while the open-frame structure provides access to installed components and helps keep the rack layout visible and accessible.
Rack Capacity and Format
This rack provides 22U of vertical mounting space in a standard 19-inch equipment format. The four-post design supports equipment at both the front and rear mounting points, making it suitable for rack-mount devices that require support across their depth. Its 22U capacity gives equipment a defined vertical footprint while leaving room to arrange multiple devices in a single rack.
The rack is identified as a 36-inch knock-down cabinet. It is supplied in a flat-pack, disassembled format for assembly into a complete rack structure. Its listed overall dimensions are approximately 603 × 1005 × 1112 mm (about 23.7 × 39.6 × 43.8 inches). These exterior measurements describe the assembled rack and are distinct from the usable mounting depth, which is adjustable.
Adjustable Mounting Depth
The mounting rails can be positioned to suit equipment with different front-to-back dimensions. The reported adjustment range is approximately 14 to 83 cm, with a maximum stated mounting depth of about 29 inches (75 cm) in product descriptions. This flexibility allows the rack to be configured for a range of servers and network devices, subject to each component’s dimensions and mounting requirements.
Adjustable rails also make it possible to adapt the rack layout when equipment changes. Before installation, the required depth should be checked against the device’s chassis dimensions, connector clearance, cable routing needs, and the rack’s rail positions.
Load Capacity and Construction
The rack is described as having a maximum load capacity of 800 kg (1764 lb). This rating refers to the stated equipment capacity; the total installed load should remain within the product’s specifications and be distributed appropriately across the rack’s mounting structure.
The frame is made from steel and finished in black. Its four-post construction provides mounting points at the front and rear, while the open-frame arrangement leaves the sides and equipment faces accessible for installation, inspection, and servicing. The product is also described in some specifications as a lockable rack cabinet with a steel-and-glass door. Configurations and included components should be verified against the specific unit being described.
Mobility and Rack Access
Casters are included in product descriptions, allowing the assembled rack to be moved when its setup and installed load permit. The rack’s wheeled configuration can be useful when equipment needs to be repositioned for access or when the installation layout changes. Movement should be performed carefully, particularly when the rack contains heavy or tall equipment.
The open-frame design offers direct access to mounted equipment and cabling. This can simplify routine tasks such as checking connections, changing components, and organizing hardware. The four-post structure also keeps equipment supported at both ends, while the adjustable rails help match the rack to the depth of the installed devices.
Equipment Compatibility
The rack is intended for 19-inch rack-mount equipment, including compatible servers, network hardware, and audiovisual or information-technology components. Compatibility depends on the device’s rack-mount format, height in rack units, depth, weight, and mounting hardware. Each device should be checked individually before installation.
- Rack width: 19-inch equipment format
- Vertical capacity: 22U
- Mounting structure: Four-post frame
- Adjustable depth: approximately 14–83 cm, depending on configuration
- Maximum stated mounting depth: approximately 29 inches (75 cm)
- Maximum stated load capacity: 800 kg (1764 lb)
- Frame material: steel
- Finish: black
- Mobility: casters are listed
- Assembly format: knock-down, flat-pack design
- Approximate overall dimensions: 603 × 1005 × 1112 mm
Installation Considerations
Because the rack is supplied disassembled, it must be assembled before equipment is mounted. The rack should be positioned on a suitable, level surface, and its assembly and equipment installation should follow the product’s instructions. Confirm the intended location can accommodate the assembled rack’s footprint and height, and allow enough room for access to equipment and cabling.
When planning the equipment layout, account for the rack’s 22U capacity, the depth of each device, airflow requirements, cable paths, and the total load. Rail positions should be set to suit the equipment being installed. Heavy components should be mounted and handled with appropriate care, and the stated load limit should not be exceeded.
Product Summary
The StarTech.com RK2236BKF combines a 22U capacity, a four-post steel frame, and adjustable-depth mounting rails in a knock-down rack format. Designed for compatible 19-inch servers and network or AV equipment, it offers a stated load capacity of up to 800 kg, a black finish, and casters for mobility. Its adjustable mounting depth helps accommodate equipment of different sizes, while its open-frame arrangement provides access to the installed hardware.

