StarTech.com 2U Adjustable-Depth Vented Sliding Rack Mount Shelf
The StarTech.com 2U Adjustable Mounting Depth Vented Sliding Rack Mount Shelf is a sliding shelf designed to support equipment inside a compatible 19-inch rack or server cabinet. Its adjustable mounting depth, ventilated steel surface, and pull-out design provide a practical platform for rack equipment that does not mount directly to rack rails.
Product overview
This shelf occupies 2U of rack space and is built for equipment weighing up to 50 lb (22.7 kg). The shelf slides outward from the rack, helping make supported equipment easier to access for inspection, connection changes, and routine handling. Its adjustable mounting depth allows the shelf to fit a range of rack configurations rather than a single fixed front-to-back measurement.
The ventilated surface uses openings in the shelf to allow airflow around equipment placed on it. The shelf is made from steel and has a black finish, giving it a sturdy, rack-ready construction suited to equipment installations.
Key features
- 2U rack-space requirement: Fits within two vertical rack units in a compatible 19-inch rack.
- Adjustable mounting depth: Designed for rack depths in the approximate 20–30-inch range, with product information also describing a mounting-depth range of about 51–74 cm.
- Sliding access: Pulls forward from the rack to make equipment on the shelf more accessible.
- Vented construction: Perforations in the shelf help support airflow around installed equipment.
- Load capacity: Supports a maximum load of 50 lb (22.7 kg).
- Steel construction: Provides a durable support surface for rack-mounted equipment.
- 19-inch rack compatibility: Intended for use with standard-width equipment racks and cabinets that accommodate its mounting dimensions.
Adjustable rack fit
Rack cabinets differ in usable depth, so a shelf with adjustable mounting depth can be useful when configuring a rack installation. This model is described for mounting depths of approximately 20 to 30 inches. The adjustable rails allow the shelf assembly to be set to suit the distance between the rack’s mounting points, within its supported range.
Before installation, measure the rack’s available mounting depth and check that the shelf can be secured to the intended front and rear mounting locations. Also confirm that the rack provides 2U of free vertical space and is compatible with the shelf’s mounting arrangement.
Sliding access to equipment
The sliding design allows the shelf to move outward from the rack instead of requiring equipment to remain fully recessed during access. This can make it easier to reach equipment positioned on the shelf, particularly when the rack is installed in a confined area or when connections and controls are located toward the rear or sides of the equipment.
As with any sliding rack shelf, the equipment should be positioned securely and the load should remain within the stated capacity. The shelf should be operated carefully, especially when carrying equipment, and should be returned to its intended position after access.
Ventilated shelf surface
The shelf’s vented design incorporates openings across its supporting surface. These openings allow air to circulate more freely than a solid shelf surface, which can help avoid unnecessarily obstructing airflow around equipment. The ventilation pattern also reduces the amount of solid material across the shelf while retaining a platform for supported devices.
Equipment should be placed so that its own ventilation openings are not blocked. The shelf’s perforations support airflow through the shelf area, but they do not replace the cooling requirements specified for the equipment being installed.
Construction and capacity
Constructed from steel, the shelf is intended to provide a firm platform for rack equipment. Its stated maximum load is 50 lb (22.7 kg). The total equipment load placed on the shelf should not exceed this limit, and the rack itself must also be suitable for the combined weight of its installed components.
For stable support, distribute the load evenly across the shelf and keep heavier equipment appropriately positioned. Confirm that the rack is securely assembled and that the shelf is correctly attached before placing equipment on it.
Typical product applications
The shelf can be used to support equipment that needs a platform inside a rack but is not designed for direct attachment to standard rack rails. Depending on its dimensions and the rack layout, it may be appropriate for components such as small devices, accessories, or other rack-compatible equipment that fits within the available shelf area and stays within the load limit.
Its sliding construction can be especially useful when equipment needs to be reached periodically, while the adjustable depth helps accommodate different rack layouts. The ventilated surface is suited to installations where airflow around supported equipment is a consideration.
Installation considerations
- Verify that the rack is a compatible 19-inch rack and has at least 2U of available space.
- Measure the distance between the rack’s mounting points and confirm it falls within the shelf’s stated adjustable-depth range.
- Secure the shelf to the rack according to the included installation instructions.
- Check that the shelf slides freely and that its path is not obstructed by cables, doors, or nearby equipment.
- Keep the supported load at or below 50 lb (22.7 kg) and distribute it evenly.
- Ensure that the shelf and rack are stable before extending the shelf or accessing equipment.
Product specifications
- Product type: Sliding rack-mount shelf
- Rack space: 2U
- Rack width: 19-inch rack format
- Mounting depth: Adjustable; approximately 20–30 inches (about 51–74 cm, depending on the listed measurement)
- Maximum load capacity: 50 lb (22.7 kg)
- Surface: Vented/perforated
- Material: Steel
- Finish: Black
- Model reference: UNISLDSHF19
Summary
The StarTech.com 2U Adjustable Mounting Depth Vented Sliding Rack Mount Shelf combines a pull-out design with adjustable rack depth, a ventilated steel platform, and a maximum load capacity of 50 lb (22.7 kg). Designed for compatible 19-inch racks, it provides a practical way to support non-rackmount equipment while keeping it accessible within the rack enclosure.