ABS All Brake Systems A.B.S 18098 Brake Disc Rotors

ABS All Brake Systems A.B.S 18098 Brake Disc Rotors

The ABS All Brake Systems A.B.S 18098 Brake Disc Rotor is a high‑performance braking component engineered for modern automotive platforms. Designed with precision machining and advanced material composition, this rotor delivers consistent stopping power, superior heat dissipation, and extended service life.

Key Technical Specifications

• Diameter: 345 mm (13.58 in)
• Thickness: 30 mm (1.18 in)
• Slot Count: 6/5 (six outer and five inner slots) to enhance cooling.
• Hub Bore: 112 mm (4.41 in)
• Weight: Approximately 3.2 kg per rotor, balancing performance with vehicle dynamics.
• Material: High‑strength steel alloy with a COAT Z surface treatment for reduced wear and improved thermal conductivity.
• Heat Dissipation: Internal venting design allows efficient airflow, maintaining rotor temperature below critical thresholds during heavy braking.
• Compatibility: Engineered to fit front axle configurations of a wide range of premium vehicles, including Audi, Porsche, VW (SVW), and other OEM platforms that specify the 100.3356.20 part number.

Design Features & Performance Benefits

The rotor’s internal venting system is a critical feature that mitigates heat buildup, preventing brake fade during aggressive driving or prolonged use. The slot pattern not only improves cooling but also facilitates the removal of debris and brake dust, maintaining optimal contact between pads and disc.

The COAT Z finish is a proprietary coating that reduces friction coefficient while resisting corrosion. This treatment extends the rotor’s lifespan by minimizing surface wear and ensuring consistent braking performance over thousands of miles.

Installation & Maintenance Guidelines

1. Removal: Use a torque wrench to loosen the wheel hub bolts in a star pattern. Carefully lift the rotor off the hub, noting any alignment marks or retaining clips.
2. Inspection: Check for cracks, scoring, or uneven wear. Replace if any damage exceeds manufacturer tolerances.
3. Installation: Align the rotor with the hub bore and secure it using the original mounting hardware. Torque bolts to the specified value (typically 80–90 Nm) following a star sequence.
4. Brake Pad Compatibility: Pair with matching brake pads that are compatible with the rotor’s slot dimensions to ensure optimal friction and heat transfer.
5. Break‑In Procedure: After installation, perform a gradual warm‑up by driving at moderate speeds for 10–15 minutes. Avoid hard braking until the rotor reaches operating temperature.

Applications & Vehicle Compatibility

This rotor is specifically engineered to meet the stringent requirements of high‑performance vehicles. It is commonly found in:

• Audi models such as the A4 Avant (8K5, B8), A6 Avant (4G5, 4GD, C7), Q5 (8RB), and other front‑axle configurations.
• Porsche vehicles that utilize the 100.3356.20 part number for front brake rotors.
• Volkswagen Group platforms under the SVW designation, where precise fitment is critical for safety and performance.

Quality Assurance & Compliance

The rotor undergoes rigorous testing protocols, including:

• Dimensional Accuracy: Each unit is measured against OEM tolerances to ensure perfect fitment.
• Thermal Performance: Heat tests confirm that the internal venting maintains temperatures within safe limits under simulated braking loads.
• Durability Testing: Accelerated wear cycles verify long‑term reliability and resistance to cracking or delamination of the COAT Z finish.

Environmental & Safety Considerations

The rotor’s construction adheres to automotive industry standards for environmental impact. The high‑strength steel alloy is recyclable, and the COAT Z coating contains no hazardous substances that could leach into the environment during normal operation.

Conclusion

The ABS All Brake Systems A.B.S 18098 Brake Disc Rotor exemplifies engineering excellence in braking technology. Its combination of precise machining, advanced material treatment, and thoughtful design ensures reliable stopping power, heat management, and durability across a spectrum of premium vehicles. Whether you’re maintaining an existing fleet or upgrading a high‑performance vehicle, this rotor delivers the performance and peace of mind that discerning drivers demand.