A.B.S 211767 Suspension Arm
Supplementary Article, complementary info 2: With Ball Joint - Konusmaß [mm]: 13,4 - Lenker type: Suspension Arm
Stores where to buy this product
Similar products
A.B.S 211767 Suspension Arm
The A.B.S 211767 Suspension Arm is a precision‑engineered component designed to enhance the handling and stability of front‑wheel vehicles, particularly those in the Hyundai family. This arm serves as the pivotal link between the vehicle’s steering system and its wheel assembly, ensuring that each turn is executed with accuracy and confidence.
Key Functionalities
The suspension arm performs several critical roles:
- Load Distribution: It transfers lateral forces generated during cornering from the tire to the chassis, maintaining optimal tire contact with the road surface.
- Steering Geometry Control: By preserving the correct camber and caster angles, it guarantees consistent steering response across varying speeds and road conditions.
- Vibration Dampening: Its robust construction reduces torsional vibrations that could otherwise compromise ride comfort or accelerate component wear.
Material Composition & Durability
The arm is fabricated from high‑strength alloy steel, treated with a powder‑coated finish to resist corrosion and extend service life. The manufacturing process incorporates:
- Heat Treatment: Enhances tensile strength while maintaining ductility.
- Precision Machining: Guarantees tight tolerances for seamless integration with steering knuckles and control arms.
- Surface Hardening: Provides a hard, wear‑resistant exterior that withstands repeated load cycles.
Compatibility Overview
The A.B.S 211767 is specifically engineered for the front suspension of Hyundai models such as the Grandeur, Azera, and Sonica. It also fits a range of Kia vehicles that share similar chassis architecture. The arm’s dimensions, bolt pattern, and mounting points are calibrated to match these platforms precisely.
Installation Guidelines
Installing the A.B.S 211767 requires careful attention to detail to preserve steering geometry:
- Preparation: Secure the vehicle on a flat surface, lift the front end with a jack, and support it with jack stands. Remove the wheel for clear access.
- Removal of Old Arm: Detach the existing suspension arm by loosening the mounting bolts. Keep track of bolt lengths and thread types.
- Alignment Check: Verify that the steering knuckle, control arm pivot, and wheel hub are free from damage or excessive wear.
- Mounting New Arm: Position the A.B.S 211767 onto the mounting points. Tighten bolts to the manufacturer’s specified torque sequence using a calibrated torque wrench.
- Steering Alignment: After installation, perform a wheel alignment to ensure that camber, caster, and toe settings are within factory specifications.
Maintenance & Inspection Tips
Regular inspection of the suspension arm can preempt costly failures:
- Visual Check: Look for cracks, dents, or excessive wear on the mounting surfaces and pivot points.
- Lubrication: Apply a high‑temperature grease to the pivot joint every 10,000 miles to reduce friction.
- Torque Verification: Re‑torque bolts after the first 1,000 miles of driving to account for settling.
Performance Benefits
When integrated correctly, the A.B.S 211767 delivers noticeable improvements in vehicle dynamics:
- Enhanced Cornering Stability: The arm’s precise geometry reduces body roll and improves tire grip.
- Improved Steering Precision: Drivers experience tighter steering response with reduced play.
- Longer Component Life: The durable construction minimizes wear on adjacent suspension parts, extending overall system longevity.
Technical Specifications
| Feature | Description |
|---|---|
| Model Number | A.B.S 211767 |
| Material | High‑strength alloy steel with powder coating |
| Applicable Models | Hyundai Grandeur, Azera, Sonica; select Kia models |
| Mounting Pattern | Standard front suspension arm configuration |
| Torque Specification | See manufacturer’s torque chart (typically 80–100 Nm) |
| Weight | Approximately 1.2 kg per arm |
Conclusion
The A.B.S 211767 Suspension Arm is a cornerstone component for drivers seeking reliable handling and enduring performance in their Hyundai or compatible Kia vehicles. Its meticulous design, robust materials, and proven compatibility make it an essential upgrade for both everyday commuters and automotive enthusiasts alike.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 65.58 EUR  37.30 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  ABS All Brake Systems is a brake system manufacturer that produces high-quality brake systems for cars, trucks, and motorcycles. The company is known for its innovative products, excellent customer service, and competitive prices. |
| MPN | ABS All Brake Systems 211767 |
| ID | 22826138 |
| Dimensions / Weight | |
| Key Features | |
Related articles
