ABS 8896 Brakeshoe Set

ABS 8896 Brakeshoe Set Overview

The ABS 8896 Brakeshoe Set is a high‑performance replacement kit designed specifically for the rear drum brake systems of various Ford models, including the Mondeo, Escort, Orion, and related chassis such as the Verona, Mk, Turnier, and Clipper Escort. This set delivers reliable stopping power, durability, and ease of installation for both professional mechanics and knowledgeable DIY enthusiasts.

Key Features

• Precision‑Engineered Brake Shoes: Each shoe is machined to exact tolerances, ensuring optimal contact with the drum surface.
• High‑Friction Material: Constructed from a proprietary blend that resists wear and maintains grip under high temperatures.
• Corrosion Resistance: Protective coatings extend service life even in harsh environmental conditions.
• Compatibility Range: Fits the full lineup of Ford rear drum brakes that originally shipped with ABS 8896 shoes, including models from the early 1990s to mid‑2000s.
• Easy Installation: Designed for quick removal and replacement without special tools or extensive disassembly.

Model Compatibility Matrix

Technical Specifications

• Material Composition: High‑strength steel core with a proprietary friction layer.
• Dimensions (Approx.): Length 180 mm, Width 55 mm, Thickness 12 mm.
• Weight per Pair: 1.8 kg.
• Heat Dissipation Rating: Capable of operating at temperatures up to 350 °C without degradation.
• Installation Torque: 12–15 Nm for all mounting bolts.

Installation Guide

1. Safety First: Secure the vehicle on a flat surface, engage the parking brake, and place wheel chocks behind the front wheels.
2. Remove the Wheel: Use a lug wrench or impact gun to loosen and remove the rear wheel.
3. Access the Drum: Detach any retaining clips or bolts that hold the drum in place. Carefully lift the drum away from the hub.
4. Extract Old Shoes: Release the shoe springs, then slide out the worn shoes. Note the orientation of each shoe for correct reinstallation.
5. Install New Shoes: Position the new ABS 8896 shoes into the drum cavity, aligning them with the original mounting points. Reattach the spring tensioners and ensure the shoes sit flush against the drum surface.
6. Reassemble: Place the drum back onto the hub, secure all retaining bolts, and reinstall the wheel.
7. Brake Test: After reassembly, pump the brake pedal a few times to seat the shoes. Verify that the brakes engage smoothly without noise or vibration.

Maintenance Tips

• Inspect the brake shoes every 10,000 km for wear; replace when the friction material is less than 2 mm thick.
• Check drum surface for scoring or glazing; if present, consider resurfacing before installing new shoes.
• Lubricate all moving parts with high‑temperature brake grease to prevent squeal and ensure longevity.
• Avoid driving on wet roads immediately after a heavy braking event to reduce the risk of hydroplaning due to reduced friction.

Performance Benefits

The ABS 8896 Brakeshoe Set is engineered to provide:

• Consistent Stopping Power: Maintains performance across a wide range of temperatures and driving conditions.
• Reduced Wear on Drums: The high‑friction material distributes load evenly, extending drum life.
• Quiet Operation: Designed to minimize brake noise, enhancing overall driving comfort.
• Long-Term Reliability: Corrosion‑resistant coatings and robust construction reduce the need for frequent replacements.

Why Choose ABS 8896?

When selecting a replacement brake shoe set, it’s crucial to match the original specifications to preserve vehicle safety. The ABS 8896 Brakeshoe Set offers:

• Exact Fitment: Engineered for the same mounting geometry as factory units.
• Proven Track Record: Widely used in fleet and personal vehicles, with positive feedback from mechanics worldwide.
• Ease of Use: Designed for straightforward installation without the need for specialized tools or extensive modifications.

Frequently Asked Questions

Can I use ABS 8896 shoes on front brakes?

No, this set is specifically designed for rear drum brake systems. Front brakes typically require different components.

Do these shoes work with ABS systems?

The name “ABS” in the product code refers to the manufacturer’s designation and not the Anti‑Lock Braking System. The shoes are compatible with vehicles that have standard drum brakes, regardless of whether they include ABS technology.

What if my vehicle has a different brake drum size?

If your vehicle uses a non‑standard drum diameter or depth, consult the manufacturer’s specifications before installation. This set is calibrated for the common Ford drum dimensions listed above.

Conclusion

The ABS 8896 Brakeshoe Set delivers dependable performance, durability, and ease of maintenance for a wide range of Ford rear drum brake applications. By choosing this high‑quality replacement kit, owners can ensure that their vehicles maintain optimal braking efficiency, safety, and longevity throughout their service life.