Blue Print ADH27132 ABS Sensor, pack of one

Blue Print ADH27132 ABS Sensor – Precision Wheel Speed Detection

The Blue Print ADH27132 ABS Sensor is a high‑performance wheel speed sensor designed for the front right axle of Honda vehicles, particularly the Accord series. Packaged as a single unit, this sensor delivers reliable performance in both domestic and international markets.

Key Features & Technical Highlights

• Model Identification: ADH27132 – a dedicated ABS wheel speed sensor for Honda front right axle.
• Application: Engineered to fit the Honda Accord VTEC 2.0/2.4 (02/03‑05/08), Accord 2.0/2.2 TDi 2.4, and other Accord variants with OE part numbers such as 57450SDH003 and 57450SDC003.
• Sensor Type: Hall‑effect wheel speed sensor providing accurate rotational data to the vehicle’s ABS control module.
• Operating Temperature Range: -40 °C to +85 °C, ensuring dependable operation in extreme climates.
• Electrical Characteristics: Typical operating voltage of 12 V DC with a current draw below 50 mA under normal conditions.
• Mechanical Design: Compact housing with reinforced mounting flange for secure attachment to the wheel hub assembly.
• Signal Output: Standard 3‑wire configuration (ground, power, signal) compatible with OEM wiring harnesses.

Compatibility Overview

The ADH27132 is specifically tailored for Honda’s front right wheel speed sensor slot. It matches the following OEM part numbers and vehicle models:

• Honda Accord VTEC 2.0 (02/03‑05/08)
• Honda Accord VTEC 2.4 (02/03‑05/08)
• Honda Accord 2.0/2.2 TDi 2.4
• Accord 7 Tourer and Accord 7 Limousine
• Other Honda models with the same front axle sensor architecture.

For international buyers, the sensor is also listed under various language titles such as:

• Capteur ABS Blue Print ADH27132 (French)
• Sensore ABS Blue Print ADH27132 (Italian)
• Sensor, wheel speed Blue Print ADH27132 (Spanish)
• Sensor, Raddrehzahl Blue Print ADH27132 (German)

Installation Guide

1. Preparation: Disconnect the vehicle’s battery to prevent electrical hazards.
2. Remove Old Sensor: Detach the existing wheel speed sensor by loosening the mounting bolts and carefully pulling it from the hub assembly.
3. Install New Sensor: Align the ADH27132 with the mounting flange, secure it using the supplied bolts, and ensure a snug fit to avoid vibration.
4. Reconnect Wiring: Attach the sensor’s three wires (ground, power, signal) to the corresponding connectors on the vehicle’s harness. Verify polarity and continuity.
5. Test Functionality: Reconnect the battery, start the engine, and observe the ABS indicator light. A steady light indicates correct operation; a flashing or off light may signify wiring issues.

Performance Benefits

• Enhanced Safety: Accurate wheel speed detection allows the ABS system to modulate brake pressure effectively, reducing stopping distances on slippery surfaces.
• Durability: Constructed with high‑grade materials that resist corrosion and mechanical wear, extending service life under harsh driving conditions.
• Reliability: Consistent signal output ensures the vehicle’s electronic stability control (ESC) functions without interruption.

Maintenance & Troubleshooting Tips

• Regularly inspect the sensor housing for cracks or damage. Replace immediately if any defects are found.
• Check wiring insulation for signs of abrasion; repair or replace damaged sections to prevent short circuits.
• If the ABS light remains on after installation, use a diagnostic scanner to read fault codes related to wheel speed sensors (e.g., P0335).

Why Choose Blue Print ADH27132?

The Blue Print ADH27132 ABS Sensor offers a blend of OEM compatibility and aftermarket reliability. Its precise engineering ensures seamless integration with Honda’s braking architecture, while its robust construction delivers long‑term performance without compromising safety.

Conclusion

For drivers seeking a dependable replacement for their front right wheel speed sensor on Honda Accord models, the Blue Print ADH27132 ABS Sensor stands out as an optimal choice. Its proven compatibility, durable design, and straightforward installation make it a trusted component in maintaining vehicle safety and performance.