394.62 USD
Cisco glcfe100lxrgdznetwork transceiver
Hot-swappable when deployed, the switch or router does not have to reboot Supports the pay-as-you-populate model Interchangeable with other 100BASE-X SFPs on the same line card Supports the Cisco quality ID feature that enables the sw
Stores where to buy this product
ETechBuy.com
Cisco GLC-FE-100LX-RGD: A Comprehensive Overview
The Cisco GLC-FE-100LX-RGD is a high‑performance, single‑mode fiber optic transceiver designed for reliable network connectivity. It operates at the 1310 nm wavelength and supports a data rate of 100 Mbps, making it ideal for short‑range Ethernet links in enterprise environments.
Key Technical Specifications
- Data Rate: 100 Mbps (100Base‑LX10)
- Wavelength: 1310 nm, single‑mode fiber (SMF)
- Maximum Transmission Distance: Up to 10 km on SMF
- Connector Type: LC duplex
- Operating Temperature Range: 0 °C to 70 °C (ambient)
- Transmit Power: –8 dBm to –15 dBm
- Compliance: IEEE 802.3, IEEE 802.3ah Draft 3.0
Design and Build Quality
The transceiver features a ruggedized housing that protects internal components from environmental stressors such as dust, moisture, and vibration. Its compact SFP (Small Form‑Factor Pluggable) form factor allows for easy integration into Cisco Catalyst switches and routers without requiring additional power supplies or complex cabling.
Performance Characteristics
With a transmit power range of –8 dBm to –15 dBm, the GLC-FE-100LX-RGD delivers consistent signal strength across its full 10 km reach. The LC duplex connector ensures low insertion loss and high return‑loss performance, which translates into minimal data errors and improved overall network reliability.
Compatibility and Use Cases
This transceiver is fully compatible with a wide range of Cisco networking gear, including:
- Catalyst 2960, 2960‑24, 2960‑48, 2960G‑24, 2960G‑48, 2960S‑24, and 2960S‑48 series switches
- Other enterprise routers and switches that support IEEE 802.3 and IEEE 802.3ah standards
Typical deployment scenarios include:
- Connecting access layer switches to distribution or core layers over fiber links
- Linking remote branch offices via single‑mode fiber for high‑speed, low‑latency communication
- Providing redundancy in critical network paths where reliability is paramount
Installation Guidelines
- Verify Compatibility: Ensure the host device supports SFP modules and the 100Base‑LX10 standard.
- Prepare the Fiber Cable: Use a single‑mode fiber cable with LC connectors. Clean the connector surfaces with lint‑free wipes before insertion.
- Insert the Transceiver: Align the gold contacts of the transceiver with the slot on the host device and gently push until it clicks into place.
- Secure the Cable: Attach the fiber cable to the LC connector, ensuring a snug fit. Use appropriate cable management to avoid strain.
- Verify Link Status: Check the status LEDs on the host device or use network management software to confirm link establishment and performance metrics.
Operational Environment
The module is engineered for operation within a temperature range of 0 °C to 70 °C. It can withstand typical office, data center, and industrial environments without compromising signal integrity or component longevity.
Maintenance and Troubleshooting
- Regular Inspection: Periodically inspect the LC connector for dust accumulation or physical damage.
- Signal Quality Checks: Use optical power meters to monitor transmit and receive power levels, ensuring they remain within specified limits.
- Link Failure Diagnosis: If a link drops, verify cable continuity, check for connector misalignment, and confirm that the host device’s firmware is up to date.
Conclusion
The Cisco GLC-FE-100LX-RGD offers a reliable, high‑quality solution for single‑mode fiber connectivity at 100 Mbps. Its robust design, adherence to industry standards, and compatibility with a broad spectrum of Cisco networking equipment make it an essential component for building resilient enterprise networks.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 415.83 EUR  425.20 EUR  408.92 EUR  200.52 EUR |
| Colors
Predominant colors of the product |
|
| Tags | Cisco 100BASE-LX10 SFP |
| Identifiers | |
| Brand |  Cisco is a technology company that provides networking, telecommunications, and security products and services. The company was founded in 1984 and is headquartered in San Jose, California. |
| Model | Cisco GLC-FE-100LX-RGD= |
| MPN | Cisco GLC-FE-100LX-RGD= |
| ID | 10643986 |
| Dimensions / Weight | |
| Key Features | |
|
Compliance industry standards A list of regulatory, environmental, safety, and quality certifications that a product meets. Each entry may be a single certification (e.g., "RoHS", "CE") or a group of related certifications separated by commas (e.g., "CE, FCC, RoHS"). The attribute captures all applicable compliance marks for the item.
|
IEEE 802.3ah Draft 3.0, IEEE 802.3 |
|
Fiber type The classification of optical fiber used in a network transceiver or cable, indicating whether it is single‑mode (SMF), multi‑mode (MMF), or a specific variant such as SM (Single‑Mode) or MM (Multi‑Mode). It may also include the core diameter specification (e.g., 9/125 µm). This attribute helps users identify compatibility with devices and understand signal propagation characteristics.
|
SMF |
|
Operating temperature range (T-T) The temperature interval, expressed in degrees Celsius (°C), within which a product can safely operate without risk of damage or performance degradation. Values may be presented as a single temperature, a minimum–maximum range (e.g., "0 - 70 °C"), or an average operating point.
|
0 - 70 °C |
|
Transmit power The maximum power level at which a device can transmit radio signals, expressed in the appropriate unit such as decibels relative to one milliwatt (dBm) or milliwatts (mW). It indicates the strength of the transmitted signal and is used to assess coverage range and regulatory compliance.
|
-8 - -15 dBmW |
Related articles
