Hewlett Packard Enterprise JD094B network transceiver module 10000 Mbits SFP+

Overview of the Hewlett Packard Enterprise JD094B Network Transceiver Module 10000 Mbits SFP+

The JD094B is a high‑performance 10 Gbps SFP+ transceiver module designed for use in enterprise networking environments. It delivers reliable, long‑reach optical connectivity with a compact form factor that fits seamlessly into standard SFP+ slots on switches, routers, and other network devices.

Key Technical Specifications

• Interface Type: SFP+ (Small Form-factor Pluggable Plus)
• Data Rate: 10 Gbps (10000 Mbits/s)
• Optical Standard: 10GBase‑LR
• Connector Type: LC
• Wavelength: 1310 nm
• Reach: Up to 10 km over single‑mode fiber (SMF)
• Operating Temperature: –25 °C to +70 °C
• Power Consumption: ≤ 2.5 W
• Compliance: IEEE 802.3ae, ITU‑G.652, IEC 60794
• Harmonized System Code: 85369010

Design and Build Quality

The JD094B features a rugged, metal housing that protects the internal optics and electronics from environmental stress. The LC connector is engineered for high‑density deployment, allowing quick insertion and removal without compromising signal integrity. Its slim profile ensures minimal cable clutter in densely populated racks.

Performance Characteristics

• Signal Integrity: Maintains a low bit error rate (BER) of ≤10⁻¹² over the full 10 km range.
• Latency: Sub‑nanosecond propagation delay, ideal for latency‑sensitive applications such as data center interconnects and high‑frequency trading.
• Power Efficiency: Optimized for low power consumption while delivering maximum throughput.

Compatibility Matrix

The JD094B is engineered to work with a broad range of Hewlett Packard Enterprise networking platforms, including but not limited to:

• Switches: Aruba 5000 Series, 5500 Series, 5800 Series, 5900AF, 5920AF
• Routers & Gateways: HPE FlexFabric 1.92, 11908, 12902, A5830AF, 12504, 5120
• Other Devices: Any equipment supporting the 10GBase‑LR standard with an LC SFP+ port.

Installation and Deployment Guidelines

1. Verify Port Compatibility: Ensure the target device has a compatible SFP+ slot that supports 10 Gbps operation.
2. Fiber Preparation: Use single‑mode fiber (SMF) with proper cleaning and handling to avoid contamination.
3. Connector Alignment: Align the LC connector carefully; a misalignment can lead to signal loss or increased BER.
4. Secure Mounting: Insert the module firmly until it clicks into place, confirming secure attachment.
5. Configuration Check: After installation, verify link status and performance metrics via the device’s management interface.

Typical Use Cases

• Data Center Interconnect (DCI): Linking remote data centers over long distances with minimal latency.
• Enterprise Campus Networks: Providing high‑speed backbone links between buildings or campus sites.
• Service Provider Backbones: Supporting carrier‑grade optical networks that require robust, low‑maintenance components.
• High‑Performance Computing (HPC): Enabling fast data transfer between compute nodes and storage arrays.

Maintenance and Troubleshooting Tips

• Regular Inspection: Periodically check the LC connector for dust or debris; clean with approved optical cleaning tools.
• Signal Monitoring: Use network monitoring software to track BER, signal-to-noise ratio (SNR), and power levels.
• Temperature Checks: Ensure ambient conditions remain within the specified range to prevent thermal drift.
• Firmware Updates: Keep device firmware current; compatibility updates may enhance transceiver performance.

Environmental and Sustainability Considerations

The JD094B is designed with energy efficiency in mind, contributing to lower operational costs and reduced carbon footprint. Its durable construction minimizes the need for frequent replacements, aligning with sustainable procurement practices.

Conclusion

The Hewlett Packard Enterprise JD094B 10 Gbps SFP+ Transceiver Module stands out as a reliable, high‑performance solution for long‑reach optical networking. Its robust design, extensive compatibility, and precise engineering make it an essential component for modern enterprise networks that demand speed, reliability, and scalability.