Seac Driver Computer
Maximize your dive with the Seac Interface Computer, perfect for action, HR monitoring & apnea training. Compact, accurate & user-friendly – dive smarter!
Similar products
Seac Driver Computer
The Seac Driver Computer is a specialized USB interface cable designed to connect Seac dive computers—such as the Action, Action HR, and Sub models—to personal computers for data transfer, firmware updates, and configuration. It serves as the essential bridge between underwater navigation technology and surface-level software, enabling divers to manage logs, calibrate sensors, and keep their equipment up-to-date.
Key Features
- Universal Compatibility: Works seamlessly with Seac Action, Action HR, Sub, and other Seac dive computer series.
- High-Speed Data Transfer: Supports USB 2.0 (480 Mbps) for rapid log downloads and firmware uploads.
- Durable Construction: Reinforced cable jacket and gold-plated connectors resist corrosion, ensuring reliable performance in marine environments.
- Plug-and-Play Design: No drivers or additional software required on most operating systems; simply connect to the computer’s USB port.
- Compact Size: Typically 1.5–2 meters long, allowing easy handling during dives and surface operations.
Technical Specifications
| Parameter | Description |
|---|---|
| Connector Type | USB Type‑A (male) to Seac proprietary USB port (female) |
| Cable Length | 1.8 m (standard); optional longer variants available |
| Data Rate | Up to 480 Mbps (USB 2.0 Full‑Speed) |
| Operating Temperature | -20 °C to +60 °C |
| Waterproof Rating | IPX4 (resistant to splashes; not fully submersible) |
| Material | High‑density polyethylene jacket, reinforced with braided nylon |
| Connector Finish | Gold-plated contacts for corrosion resistance |
Installation and Setup
- Power Off: Ensure the dive computer is switched off before connecting.
- Connect Cable: Insert the Seac end into the computer’s USB port; attach the other end to the dive computer’s data port.
- Software Recognition: Launch your preferred dive log software (e.g., DiveMate, Subsurface). The program should automatically detect the device and prompt for a firmware update or log download.
- Data Transfer: Follow on-screen instructions to transfer logs or perform updates. Typical downloads complete within seconds due to high data rate.
- Disconnect Safely: After completion, power off the dive computer and then unplug the cable to avoid electrical surges.
Common Use Cases
- Log Management: Retrieve dive logs for analysis, sharing with instructors, or compliance records.
- Firmware Updates: Keep the dive computer’s software current to benefit from bug fixes and new features.
- Sensor Calibration: Perform barometer, depth sensor, and temperature sensor calibrations via the PC interface.
- Custom Configurations: Adjust dive profiles, alarm thresholds, and user preferences through dedicated software.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
|---|---|---|
| No device detected | Cable damaged or connectors dirty | Inspect cable, clean contacts, try a different USB port. |
| Slow transfer speed | USB 1.1 port used | Switch to a USB 2.0 port; ensure drivers are up-to-date. |
| Firmware update fails | Incompatible firmware version | Download the correct firmware from Seac’s official site and retry. |
| Cable frays at connector | Repeated bending or pulling | Replace cable; avoid excessive tension during use. |
Maintenance Tips
- After each dive, rinse the cable with fresh water and dry thoroughly to prevent salt buildup.
- Avoid exposing the cable to extreme temperatures or direct sunlight for prolonged periods.
- Store the cable in a cool, dry place; coil loosely to avoid kinks.
- Inspect connectors periodically for corrosion; if discoloration appears, clean with isopropyl alcohol and a soft brush.
Frequently Asked Questions (FAQ)
- Can I use this cable with non-Seac dive computers?
- No. The cable’s connector is specifically designed for Seac’s proprietary USB port; other brands require different interfaces.
- Is the cable waterproof?
- The cable meets IPX4 standards, meaning it resists splashes and brief immersion but should not be submerged for extended periods.
- Do I need special software to use the cable?
- No. Most mainstream dive log programs automatically recognize Seac devices once connected.
- What if my computer doesn’t detect the device?
- Check that the USB port is functional, try a different port, and ensure the dive computer is powered off during connection.
Conclusion
The Seac Driver Computer is an indispensable accessory for any diver relying on Seac dive computers. Its robust design, high-speed data transfer, and universal compatibility make it a reliable tool for maintaining accurate dive records, ensuring firmware integrity, and customizing underwater navigation settings. By following proper installation, usage, and maintenance practices, divers can enjoy seamless connectivity between their Seac equipment and surface-level computing systems.
This product in Comparor
Identifiers

Seac Pro Hand Paddle for Swimming
SEAC Jump Swimming Goggles - Adult Size - Black
SEAC Pair of Inserts for speargun rubbers with Dyneema cord ogive eyelets
Pair of Seac inserts to make spearfishing Dyneema ogives for rubber guns - Total length of the single insert: 3.2 cm. - Diameter of the through hole for the Dyneema line: Ø 3 mm. - Item Package Quantity: 1
Seac Boa Fluo Siluro with Line
Discover the Seac Boa Siluro Fluo - your ultimate dive companion with a high-visibility fluo design and durable sagola for secure underwater exploration

