Stabilus 7901GO Gas Spring, boot-/cargo area
Stabilus Lift-O-Mat Gas Spring 7901GO is a high-quality gas strut designed for use in the cargo or trunk area of a vehicle. It provides smooth and controlled opening and closing movements, ensuring ease of access to the boot or cargo space
Stores where to buy this product
Similar products
Stabilus 7901GO Gas Spring – Tailgate & Cargo Area Performance
The Stabilus 7901GO Gas Spring is a high‑performance hydraulic actuator designed specifically for the tailgate and cargo area of vehicles such as the Fiat Brava (1995–2002) and similar models. This component delivers smooth, controlled motion and reliable support, ensuring that the rear hatch operates effortlessly while maintaining structural integrity during everyday use.
Key Functional Characteristics
- Force Rating: 360 Newtons – sufficient to counterbalance the weight of a fully loaded tailgate or cargo area without excessive effort from the driver.
- Dual‑Side Operation: The spring is engineered for use on both sides of the hatch, providing symmetrical support and balanced movement.
- Compact Design: A streamlined profile that fits within standard mounting brackets, minimizing space requirements in tight rear compartments.
- Durable Construction: Made from high‑strength steel and coated with corrosion‑resistant paint to withstand harsh environmental conditions.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | 7901GO |
| Force Output | 360 N (Newton) |
| Length | 520 mm (approx.) |
| Material | High‑strength steel alloy with protective coating |
| Operating Temperature Range | -40 °C to +120 °C |
| Installation Type | Standard mounting bracket compatible with Fiat Brava and similar models |
Compatibility Overview
The Stabilus 7901GO is specifically engineered for the Fiat Brava (1995–2002), but its design allows it to be adapted to other vehicles with comparable tailgate dimensions and mounting points. When selecting a replacement, verify that:
- The hatch frame accommodates a 520 mm actuator.
- Mounting brackets align with the standard Stabilus interface.
- The vehicle’s weight distribution matches the 360 N force rating for optimal performance.
Installation Guide
- Preparation: Disconnect the battery to prevent accidental deployment. Remove any existing gas spring or mounting hardware.
- Mounting Bracket Placement: Position the bracket on the rear frame, ensuring alignment with the tailgate hinge. Secure with bolts provided in the kit.
- Attach Gas Spring: Slide the Stabilus 7901GO into the bracket, aligning the threaded end with the mounting screw. Tighten securely to lock the spring in place.
- Test Operation: Open and close the tailgate several times to confirm smooth movement and proper tension. Adjust if necessary by repositioning the bracket slightly.
- Final Check: Inspect all fasteners for tightness and verify that no metal parts are rubbing against the hatch or cargo area.
Performance Benefits
- Consistent Tension: The 360 N rating ensures a steady, predictable pull, preventing sudden drops or excessive resistance.
- Reduced Wear: By absorbing impact forces, the gas spring protects the tailgate hinges and frame from premature fatigue.
- Ease of Use: Drivers experience minimal effort when opening or closing the hatch, even with heavy loads.
- Longevity: The corrosion‑resistant coating extends service life in humid or salty environments.
Maintenance Tips
- Inspect for visible damage or leaks every six months.
- Clean the mounting area with a mild detergent to remove dirt and debris.
- If you notice any unusual noise, check for loose bolts or misalignment.
- Avoid overloading the tailgate beyond the vehicle’s specified capacity to prevent undue stress on the spring.
Frequently Asked Questions
- Can I use this gas spring in a different car model?
- Only if the mounting points and dimensions match. Always verify compatibility before installation.
- What happens if the gas spring fails?
- A failed spring may cause the tailgate to drop abruptly or become difficult to open. Replace immediately to avoid damage.
- Is professional installation required?
- No, but a basic understanding of automotive mechanics is helpful. Follow the guide carefully for best results.
- How long does it last under normal use?
- The Stabilus 7901GO typically exceeds ten years in typical driving conditions when properly maintained.
Conclusion
The Stabilus 7901GO Gas Spring delivers reliable, high‑quality support for the tailgate and cargo area of vehicles like the Fiat Brava. Its robust construction, precise force rating, and straightforward installation make it an ideal choice for anyone seeking to maintain or upgrade their vehicle’s rear opening mechanism.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | Cargo area Stabilus 7901GO Gas |
| Identifiers | |
| Brand | ![]() Stabilus is a brand that produces gas springs, which are used to support and control the motion of heavy objects. The company has a wide range of products for a variety of applications, including automotive, medical, and industrial uses. |
| Model | Stabilus 7901GO |
| MPN | Stabilus 7901GO |
| ID | 7123761 |
| Dimensions / Weight | |
| Key Features | |

