Price from
272.39 USD
272.39 USD
Tplink switch administrable level 2rackable black
TP-LINK (6935364092498 / T2600G-28TS(TL-SG3424)) - 10g support - Jumbo frames support - Link aggregation - Multicast support - On/off switch - Rack mount kit - Rack mounting - Rate limiting - SSH/SSL support
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
ETechBuy.com
SponsoredFS2K-10G-NIC Cisco 2-Ports 10Gb/s 10GBase-X Network Interface Card
Cheapest Offer Refurbished Product
TP-Link T2600G-28TS: Advanced Layer‑2 Managed Switch
The TP‑Link T2600G‑28TS is a 24‑port Gigabit Ethernet switch designed for small to medium‑sized networks that demand robust performance, advanced security, and flexible management. Mounted in a single rack unit (1U), this device delivers high throughput, extensive VLAN support, and comprehensive Layer‑2 features while maintaining an energy‑efficient profile.
Key Physical Characteristics
- Dimensions: 440 mm width × 220 mm depth × 44 mm height (1U rack mount)
- Weight: Not specified, but lightweight for easy rack installation.
- Rack Mount Kit: Included; the switch is fully rack‑mountable with rubber feet for vibration dampening.
- Power Supply: Internal AC adapter (100 V–240 V, 50/60 Hz) consuming approximately 19.15 W.
Port Configuration and Connectivity
- RJ‑45 Ports: 24 × Gigabit (10/100/1000 Mbps) Ethernet ports supporting standard Cat5e/Cat6 cabling.
- SFP Slots: 4 × Combo Gigabit SFP slots for fiber or copper modules, enabling flexible uplink options.
- Console Port: RJ‑45 console port for local management via serial connection.
- Micro‑USB Slot: For firmware updates and potential future expansion.
Performance Metrics
- Switching Capacity: 56 Gbps (backplane bandwidth).
- Throughput: Up to 41.67 Mpps (megapackets per second) with a forwarding rate of 35.7 Mpps.
- MAC Address Table: 16,000 entries for efficient packet forwarding.
- Jumbo Frames: Supports frames up to 9,216 bytes (and optional 10,240 bytes), enhancing large‑payload performance.
Layer‑2 Features and Advanced Switching
- VLAN Support: Up to 4,096 VLANs with Private VLAN and Protocol‑Based VLAN capabilities.
- Spanning Tree Protocols: STP, RSTP, and MSTP for loop prevention and rapid convergence.
- Link Aggregation: LACP (IEEE 802.3ad) support for bandwidth consolidation and redundancy.
- Quality of Service (QoS): CoS/DSCP prioritization, queue scheduling (SP, WRR, SP+WRR), and rate limiting.
- Security: 802.1X authentication with RADIUS support, MAC‑IP binding, ACLs, DHCP snooping, DoS protection, and port security.
IPv4/IPv6 Dual Stack Functionality
- DHCP Services: Built‑in DHCP server with support for both IPv4 and IPv6 (DHCPv6 client).
- Routing Features: Static routing, DHCP relay, IGMP snooping, and multicast routing.
- IPv6 Support: Full dual‑stack operation, including IPv6 address autoconfiguration and neighbor discovery.
Management and Firmware Update Options
- Web Interface: Intuitive GUI for configuration, monitoring, and firmware upgrades.
- Command Line Interface (CLI): Accessible via Telnet or SSH (including SSH‑2).
- SNMP Support: SNMP v1/v2c/v3 with public MIBs and TP‑Link private MIBs for network monitoring.
- Remote Management Protocols: HTTPS, Telnet, RMON (various versions), and Syslog integration.
- Firmware Update Methods: TFTP or Web interface; firmware is signed to ensure integrity.
Environmental and Compliance Standards
- Operating Temperature: 0 °C to 40 °C (ambient).
- Storage Temperature: –40 °C to +70 °C.
- Humidity: Storage: 5–90 % RH; Operating: 10–90 % RH.
- Certifications: CE, FCC, RoHS compliance for safety and environmental protection.
Security Features in Detail
- 802.1X Authentication: Network access control via RADIUS servers.
- MAC‑IP Binding: Prevents MAC spoofing by binding a device’s MAC address to its IP and port.
- ACL Support: Fine‑grained traffic filtering based on source/destination IP, VLAN, or port.
- DoS Protection: Built‑in mechanisms to mitigate denial‑of‑service attacks at Layer 2.
Use Cases and Deployment Scenarios
- Enterprise Branch Offices: Provides reliable connectivity with VLAN segmentation for different departments.
- Data Center Fabric: Supports high‑density uplinks via SFP slots and LACP aggregation.
- Campus Networks: Offers robust QoS for voice, video, and data traffic across multiple floors.
- Industrial Automation: Rugged design with wide temperature range suitable for factory floor networking.
Installation and Rack Integration
The T2600G‑28TS comes pre‑assembled with a rack mount kit. Simply slide the switch into a 1U slot, secure it with the provided screws, and connect power via the internal AC adapter. The rubber feet reduce vibration, ensuring stable operation in busy server rooms.
Conclusion
The TP‑Link T2600G‑28TS delivers a comprehensive set of Layer‑2 features, high throughput, and flexible management options in a compact 1U form factor. Its support for VLANs, QoS, security protocols, and dual‑stack IP makes it an ideal choice for organizations seeking reliable, scalable networking without the complexity of higher‑layer routing devices.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 314.59 EUR  161.05 EUR  208.87 EUR  179.00 EUR  330.00 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  TP-Link is a brand of networking products that was founded in 1996. The company is headquartered in China, and manufactures a wide range of networking products, including routers, switches, and adapters. TP-Link has a large global presence, and is one of the most popular networking brands in the world. |
| MPN | TP-LINK T2600G-28TS(TL-SG3424) |
| ID | 18539106 |
| Dimensions / Weight | |
| Key Features | |
|
10g support Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.
|
Yes |
|
AC input frequency The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.
|
50 - 60 Hz |
|
Basic switching RJ-45 Ethernet ports quantity Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.
|
24 |
|
Cable types supported A list of the cable categories or standards that a product can use, such as Cat5e, Cat6, Cat6a, Cat7, Fiber, HDMI, USB, etc. The values are separated by commas and represent the types of cables compatible with the device.
|
Cat3,Cat4,Cat5,Cat5e |
|
Cables included A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.
|
AC |
|
Console port Represents how many console ports are physically present on the product. The value is a simple integer indicating the total count of console connectors, regardless of type or version.
|
RJ-45 |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
220 mm |
|
DHCP features A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.
|
DHCP server |
|
Fiber ethernet cabling technology The type of fiber‑optic Ethernet cabling supported by the product, such as 1000BASE‑X, 10GBASE‑LR, or 40GBASE‑SR4. It indicates which standardized fiber media and transceiver combinations are compatible with the device.
|
1000Base-X |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
44 mm |
|
Jumbo frames The largest Ethernet frame size (in bytes) that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.
|
9216 |
| Jumbo frames support | Yes |
|
Link aggregation Indicates whether the device can combine multiple network connections into a single logical link to increase bandwidth or provide redundancy.
|
Yes |
|
MAC address table The total count of unique MAC addresses that the device can store in its forwarding table. This value indicates how many devices can be simultaneously connected before the switch must start discarding or aging out older entries.
|
16000 entries |
| MIB support | SNMP v1/v2c/v3,compatible with public MIBs and TP-LINK private MIBs, SYSLOG & Public MIBS |
|
Multicast support Indicates whether the device can send or receive IP multicast traffic, allowing it to participate in group communications such as streaming media, IPTV, and certain network protocols that rely on multicast distribution.
|
Yes |
|
On/off switch Indicates whether the product includes an on/off switch that allows the user to power it on or off manually.
|
Yes |
|
Rack mount kit Indicates whether the product is a rack mounting kit and, if applicable, its compatibility with standard rack systems. The value can be "Yes" or "No", or it may include a measurement such as "1U" or "2U" to specify the height occupied by the kit when installed in a rack.
|
Yes |
|
Rack mounting Indicates whether a product is designed to be mounted in a rack system. The value is typically "Yes" or "No", but may also include a measurement such as "1U" or "2U" to specify the height occupied by the device.
|
Yes |
|
Rate limiting Indicates whether the device supports rate limiting, a feature that restricts the maximum data transfer speed or bandwidth to prevent network congestion or ensure fair usage among connected devices. A value of "Yes" means the device can enforce such limits, while "No" indicates it does not provide this capability.
|
Yes |
|
Security algorithms Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.
|
802.1x RADIUS |
|
SSH/SSL support Indicates whether the device can establish secure connections using SSH or SSL protocols, allowing encrypted remote management and data transfer.
|
Yes |
|
Switch layer The network layer(s) that a device can operate at, expressed as a string such as "L2", "L3" or combinations like "L2/L3". This attribute indicates the protocol stack level supported by the hardware or firmware.
|
L2 |
|
Switch type The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.
|
Managed |
|
Switching capacity The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.
|
56 Gbit/s |
|
Throughput The maximum rate at which a device can process or transmit data, expressed in megabits per second (Mpps). It indicates the capacity of network equipment such as switches, routers, or hubs to handle traffic without bottlenecks.
|
41.67 Mpps |
|
User guide The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping, handling, or user information purposes.
|
Yes |
| Virtual LAN features | Private VLAN,Protocol-based VLAN |
|
VLAN support Indicates whether the device can configure and manage Virtual LANs (VLANs) for network segmentation and traffic isolation. A value of "Yes" means the product supports VLAN tagging, creation, and management; a value of "No" indicates it does not provide this capability.
|
Yes |
|
Web-based management Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.
|
Yes |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
440 mm |
Related articles
Boost your network with the TP-Link TL-SG1024, a 24-port Gigabit Rackmount Switch offering high-speed Ethernet and easy unmanaged plug-and-play setup
TP-Link TL-SG1016PE 16-Port Gigabit PoE Network Switch. Managed, Black. PoE+ compliant with up to 30W per port. Ideal for office and surveillance systems. Easy setup and management.
TP-Link TL-SG1016PE 16-Port Gigabit PoE Network Switch. Managed, Black. PoE+ compliant with up to 30W per port. Ideal for office and surveillance systems. Easy setup and management.
TP-Link TL-SG1016PE 16-Port Gigabit PoE Network Switch. Managed, Black. PoE+ compliant with up to 30W per port. Ideal for office and surveillance systems. Easy setup and management.
TP-Link TL-SG1005D is a 5 port gigabit desktop switch that provides fast and reliable network connectivity. It features an unmanaged design, auto-negotiation and auto-MDI/MDIX for easy setup and plug-and-play operation.
TP-Link TL-SG1005D is a 5 port gigabit desktop switch that provides fast and reliable network connectivity. It features an unmanaged design, auto-negotiation and auto-MDI/MDIX for easy setup and plug-and-play operation.