Electrical installation
Suggestions for Electrical installation
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
A sleek KNX push‑button sensor with two switches and a built‑in bus coupling unit, finished in polished white. It offers reliable dual‑function control for smart home systems, compactly integrating into any wall plate.
Eltako FSR61-230V Wireless Actuator Impulse Switch with Flush mount design offers a maximum switching capacity of 2000W and a wireless range of up to 30 meters in an open field.
A compact A4 plastic pocket with a 40 mm depth made of durable polystyrene in light gray (RAL 7035) securely holds wiring diagrams, keeping them protected, neatly organized, and easily accessible within any cabinet or workspace.
A compact two‑channel KNX weekly time switch that synchronizes via DCF77 radio, offering precise on/off scheduling for smart homes or buildings with IP20 protection and long service life.
Discover the Schneider Electric A9MEM2000 energy meter: a reliable 1-phase, 40A solution rated for 230V. Designed to meet class 1 standards with MID compliance, ideal for precise energy monitoring and management in your facility.
FINDER FIN 12.51 230V - Timer for serial installation, electrical, 1 changer, DIN rail mount timer 230 V AC with weekday settings and week settings.
ELTAKO FT55-WG - Glossy white wireless pushbutton with rocker and double rocker, surface-mount, 30m range in open field.
Elegant alpine‑white control key with a single glossy button and arrow symbols, made from durable plastic for direct mounting. It offers a sleek, high‑scratch‑resistant finish that blends seamlessly into any window treatment design.
Eltako S12-100-230V impulse changeover switch with DIN rail mounting. 1 NO contact for 16A, 230V AC, 2300W power rating, 10A current handling capacity. Suitable for relay and contactor applications.
Digitus DN-93831 Face Plate for Multimedia / Keystone Modules, Empty Socket for 2 x Keystone Modules
DIGITUS DN-93831 is an empty socket with front panel designed to hold two keystone modules. It can accommodate RJ45 data outlets and comes in white color.
Compact digital weekly timer with a single changeover contact rated 16 A, dual PLE inputs, and 12‑24 V operation. It offers 56 programmable steps per day for precise on/off control in panel applications.
End/partition plate for terminal blocks, providing a secure and organized connection point.
A robust multilevel installation terminal designed for 2.5 mm² conductors, featuring a slide‑link (N) connection system, N‑type disconnecting capability, and a durable grey housing suitable for floor or panel mounting.
Discover the WAGO 2002-1407 Ground Terminal Block: A versatile 1-pole terminal block designed for a 5.2 mm pull spring configuration. Rated at 24A and compatible with 2.5mm² wire, this yellow/grey terminal ensures secure connections.
Feed-through double-level terminal block with 3.5mm connection and 16A current rating, ideal for secure and efficient electrical connections.
Securely connects two conductors up to 2.5 mm² with a 24 A rating. The 5.2 mm DIN rail mount offers compact, color‑coded green/yellow terminals for reliable earth grounding in industrial circuits.
Orange end/partition plate set for WAGO 2000 terminal blocks, 25 units each with a 0.7 mm thick profile that ensures secure mounting and easy cable management in industrial control panels.
The Phoenix Contact PT 2,5 feed-through terminal block is a 5.2mm quick-connect grey terminal with 24A capability designed for reliable connections in various applications.
A durable ground terminal block with a 5.2‑mm width and 100.9‑mm height, operating from –60 to +105 °C and rated at 400 V, designed for secure protection conductor connections in industrial setups.
Flush‑mounted black plastic junction box, 60 mm diameter and 66 mm depth, holds up to four screw domes for secure device connections. The IP2X rating protects against dust while remaining lightweight and easy to install in walls.
A compact hollow wall junction box with a 68 mm diameter opening and 47 mm depth, designed for ceiling light connections. It features M5 threaded screws for secure mounting, IP3X protection, and is suitable for 20 mm pipe diameters.
A bright orange, 1 mm thick end and partition plate for WAGO terminal blocks, designed for direct mounting. It provides a clean separation between terminals, ensuring secure cable management and easy maintenance in compact electrical panels.
A flush‑mounted 95 mm round cover with a robust spring lock keeps boxes or circuit boards securely closed, offering a tidy, tamper‑resistant finish without the need for screws.
Sleek titanium white frame, 80 × 80 mm, glossy finish, IP20 and halogen‑free thermoplastic construction, designed for direct wall mounting of a single‑gang switch in either horizontal or vertical orientation.
The UT 6-PE is a green and yellow ground terminal block for 0.2 to 6mm² conductors, with a one-piece design and 8.2mm spacing between terminals. It is suitable for various applications and provides reliable protection against electrical hazards.
Compact blue feed‑through terminal block with 8.2 mm bore, rated for up to 41 A and compatible with 0.2–10 mm² conductors, offering secure screw clamping and easy cable routing in industrial panels.
The UT 6 feed-through terminal block features an 8.2 mm pitch and can handle up to 41 A, making it suitable for wiring ranging from 0.2 mm² to 6 mm² in industrial control applications.
Blue feed‑through terminal block with a 6.2 mm bore, rated for 32 A and accommodating conductors from 0.14 mm² to 6 mm². It features a screw clamp for secure attachment, making it ideal for DIN rail installations and reliable signal routing.
A sleek matte plastic combination with a rocker switch and two Schuko sockets, IP44 rated for damp areas, 250 V capacity, 74 mm wide, 55 mm deep, mounted by screw, ideal for modern wall panels.
Blue WDU 6 BL feed‑through terminal block, 8 mm screw connection, 41 A/800 V rating, single row with two clamps, side mounting, UL 94 V0 rated insulation, ideal for DIN rail assemblies.
Blue feed-through terminal block with a 5.2 mm width, 48 mm height, and 47.7 mm depth, rated for 24 A up to 105 °C and down to –60 °C, ideal for compact wiring harnesses needing reliable screw‑clamp connections.
WAGO 770-103 - WINSTA® MIDI, 3-pin female connector with strain relief housing and plug-in installation capability, compatible with 3x4mm² wiring.
A compact DIN rail terminal block with a 5.2 mm width and 48 mm height, designed for 24‑ampere connections. It supports conductors from 0.14 to 4 mm², operates between –60 °C and 105 °C, and tolerates up to 1000 V.