Electrical installation
Suggestions for Electrical installation
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
A compact 5‑pin bridge for UT2.5/ST2.5/QTC1.5 terminals, rated up to 24 A and 800 V. It offers a reliable, insulated cross‑connection with a 5.2 mm pitch, ensuring secure, low‑loss signal transfer in industrial circuits.
Securely bridge up to five terminals with WAGO 780‑455, a two‑pole insulated cross‑connector designed for terminal blocks. Its compact box‑bridge layout offers reliable isolation and easy installation, ideal for industrial control panels and simplified cable management.
The LS 990 A WW is a basic element designed for use in electrical installations. It features a central cover plate and includes a cable outlet with strain relief and screw fastening. This product is available in an alpine white color.
Jung LS 990 TV Aerial Socket Outlet is a high-quality cover for a coaxial antenna socket outlet. It is break-proof, ensuring long-lasting protection for your TV/radio socket. The Alpine white color adds a modern touch to any room.
Blind cover for window or door with support ring, in alpine white color, compatible with Jung AS series.
A compact, 2‑pin fixed bridge (FBS 2‑5) designed for Phoenix Contact terminal blocks and plug‑in connectors. It provides a reliable cross‑connection with a 5.2 mm pitch for easy installation in industrial control panels.
Dual‑shelf feed‑through terminal block for 2.5 mm² conductors, rated 24 A, featuring Klippon® Connect screw terminals in beige. Compact 5 mm pitch, ideal for tight panel mounting and reliable signal routing.
Cream white two‑way cover frame, 81 mm wide and 152 mm tall with an 11 mm depth, featuring a glossy finish and IK03 impact resistance. It clamps directly onto the surface, accommodating a 2‑gang switch set and meeting IP20 protection standards.
A durable round sealing insert with a 60 mm diameter and 36.5 mm depth, engineered for flush‑fitted use in electrical junction boxes and device housings, ensuring airtight wind‑tight performance.
A sleek matte plastic 4‑way intermediate rocker switch, rated for 10 A at 250 V with a 32 mm mounting depth and IP20 protection. It offers clean, uncluttered control without built‑in lighting or text labels.
The Kaiser Elektro 1159-25 Filler is a round cover with a diameter of 72mm for flush mounted boxes. It features a break-proof spring mechanism and is suitable for use with junction boxes or printed circuit boards.
CLIPFIX 15 is an end clamp designed to securely fasten terminal blocks on DIN rails. Made of high-quality plastic, it comes in a set of 50 pieces and is compatible with Phoenix Contact's rail mounting systems.
Experience seamless lighting transitions with the MERTEN ME 544890 Argus Twilight Switch. This light grey timer adjusts brightness up to 300 lux based on natural light changes, enhancing comfort and energy efficiency in your home.
Compact blue feed‑through terminal block with a 5.2 mm width and 48.5 mm depth, rated for 24 A at 800 V. It accepts conductors from 0.25 to 2.5 mm², making it suitable for DIN rail mounting in electrical panels.
Elegant aluminium desk strip featuring four Schuko outlets in a shiny, rectangular chassis suitable for direct wall installation. The anodised surface delivers a modern look while providing sturdy power distribution without any cover or switch.
Schneider Electric XB5AG21 is a black key-operated switch with a Harmony XB5 design. It features 22mm mounting and a latching mechanism in the 1NO/0NC configuration, offering secure, controlled access through two positions.
Bachmann 341.285 3-meter white power cord/extension cord with 3x1.5mm² conductors and Schuko plugs.
Schneider Electric ZB4BW363 Harmony pushbutton is a 1-button blue planar push actuator with IP66 rating.
This product is a Gira 4x Frame System, model number 021403, with a standard 55 size and pure white glossy finish. It features a 4-way frame design for organizing and showcasing various components.
The Schneider Electric ZB5AA432 is a red push button actuator with an IP66 rating. It features a flush design and is available in 1-button and marked versions.
Discover the WAGO 2002-1304 feed-through terminal block: a versatile 3-conductor solution rated at 24A, ideal for wires 0.25 to 2.5 mm². Made of durable blue material, it provides easy wire connections with its 5.2mm design.
The WAGO 2002‑410 is a 10‑slot push‑in jumper bar with a 5.2 mm pitch, rated for 800 V and up to 25 A per contact. Its insulated terminals provide fast, reliable wiring in tight control panel spaces.
Secure two conductors up to 16 mm² with this 12‑mm grey WAGO feed‑through block, rated 76 A and 105 °C. Compact 70 mm depth, easy DIN rail mounting, reliable push‑in connection.
This white glossy rocker switch is part of the GIRA Cover Series switch system. It has a 2-way mechanism and is compatible with the System 55 series, including E2, Event Transparent/Opaque, Esprit, and ClassiX designs.
Discover the sleek elegance of the GIRA E2 RA5 RWG - a 5-gang frame in pure white finish. Perfect for modern interiors, this cover frame switchgear offers both style and functionality with its polished shine.
The Gira E2 cover frame is a pure white, glossy 1-way frame designed for the E2 system. Made with an unbreakable material, it provides durability and protection to switches and outlets. Its modern and sleek design adds a touch of elegance to any room.
Wago Compact Push Wire® Connector 8-Conductor Terminal Block Housing - 2273-208: Flexible screw terminal with 8 pins for wires 0.5-2.5 mm²; Transparent and light grey color; Contains 50 pieces.
Bachmann 5m white power cord/extension cord with 3x1.5mm² wires and Type E+F to F connectors.
A robust gray feed‑through terminal block with a 6.2 mm screw head, rated for 32 A and supporting conductors from 0.14 to 6 mm². Its compact design fits DIN rails up to 35 mm wide, offering secure, low‑resistance connections in industrial wiring systems.
Gira 5-way white glossy frame, a sleek and modern design, is perfect for organizing and showcasing your electrical switches and sockets.
The product is a two-fold cover frame made from unbreakable material in a pure white glossy finish. It belongs to the GIRA E2 series and comes with standard size 55.