49.73 GBP
ABS 210741 Track Control Arm
Enhance your ride quality with the A.B.S. Track Control Arm 210741, designed for improved stability and handling by ensuring optimal wheel alignment on both tracks
Stores where to buy this product
winparts.ie
ABS 210741 Track Control Arm
The ABS 210741 Track Control Arm is a critical component of the front‑wheel suspension system in a wide range of Mercedes-Benz vehicles, including the C‑Class, CLK, SLK, and W203/W202/S203 series. Designed with precision engineering, this control arm provides reliable steering geometry, load distribution, and durability under demanding driving conditions.
Key Functional Characteristics
- Load‑Bearing Design: The arm is engineered to support the weight of the front wheel assembly while maintaining optimal camber angles during cornering. Its robust construction ensures consistent tire contact with the road surface, enhancing handling stability.
- Steering Geometry Preservation: By controlling the longitudinal and lateral movement of the wheel hub, the track control arm preserves the vehicle’s steering geometry. This results in predictable steering response and reduced tire wear.
- Durability Under Stress: The component is fabricated from high‑strength alloy steel with a protective coating that resists corrosion and fatigue. It can withstand repeated load cycles without significant deformation.
Material Composition and Finish
The ABS 210741 Track Control Arm utilizes an alloy steel core** that offers a balance between strength and weight reduction. The surface is treated with a powder‑coated finish** to provide long‑lasting protection against environmental factors such as moisture, road salts, and temperature extremes.
Compatibility and Fitment
This control arm is specifically engineered for the following Mercedes-Benz models:
- C‑Class (W203/W204)
- CLK Series (W203, W204)
- SLK Series (W171)
- S-Class Variants (W202, S203)
It is available for both left‑hand drive (LHD) and right‑hand drive (RHD) configurations, ensuring universal applicability across global markets.
Installation Overview
- Preparation: Secure the vehicle on a lift or jack stands. Remove the front wheel and disconnect the brake caliper to access the suspension assembly.
- Removal of Existing Arm: Loosen the mounting bolts that attach the current control arm to the steering knuckle and chassis bracket. Carefully detach the arm, noting any alignment marks or spacers.
- Installation of ABS 210741: Position the new track control arm in place, aligning it with the mounting points on both the wheel hub assembly and the chassis. Tighten the bolts to the manufacturer’s specified torque settings.
- Reassembly: Reinstall the brake caliper, wheel, and any ancillary components such as tie‑rod ends or sway bar links. Verify that all fasteners are secure.
- Alignment Check: Perform a post‑installation alignment to ensure proper camber, caster, and toe settings. Adjust if necessary to maintain optimal handling characteristics.
Benefits of Upgrading to ABS 210741
- Enhanced Handling Precision: The precise geometry of the control arm contributes to tighter steering response and improved cornering stability.
- Reduced Wear on Suspension Components: By maintaining proper wheel alignment, the track control arm helps prevent premature wear on bushings, ball joints, and tie‑rod ends.
- Improved Safety: Consistent suspension performance under load reduces the risk of loss of vehicle control during high‑speed maneuvers or emergency braking.
- Long-Term Reliability: The alloy steel construction and protective coating ensure that the component endures harsh road conditions without significant degradation.
Maintenance Tips
Although the ABS 210741 Track Control Arm is designed for durability, routine inspections can extend its lifespan:
- Visual Inspection: Check for visible cracks, corrosion, or wear on mounting surfaces.
- Torque Verification: Periodically verify that all bolts remain at the specified torque values, especially after driving over rough terrain.
- Alignment Monitoring: After any significant impact or suspension repair, re‑check wheel alignment to ensure continued optimal performance.
Conclusion
The ABS 210741 Track Control Arm is a high‑quality, OEM‑grade component that plays an essential role in maintaining the structural integrity and handling dynamics of Mercedes-Benz front‑wheel suspension systems. Its robust construction, precise engineering, and compatibility with multiple model lines make it a reliable choice for both routine replacements and performance upgrades.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Control Arms |
|
International
Find this product in one of our international stores
|
 35.98 EUR  29.38 EUR  34.28 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  ABS All Brake Systems is a brake system manufacturer that produces high-quality brake systems for cars, trucks, and motorcycles. The company is known for its innovative products, excellent customer service, and competitive prices. |
| Model | ABS All Brake Systems 210741 |
| MPN | ABS All Brake Systems 210741 |
| ID | 6994142 |
| Dimensions / Weight | |
| Key Features | |
Related articles
Phoenix Fitness Abdominal Training Exercise Roller Wheel with Foam Grip Handles for Home Gym Workout
