ABS 210820 Track Control Arm

Overview

The ABS 210820 Track Control Arm is a precision‑engineered component designed to enhance the suspension dynamics of front‑wheel vehicles, particularly those within the Hyundai Getz/TB/Click family. This wishbone style arm provides robust lateral stability while maintaining optimal wheel alignment under varying load conditions.

Design Features

Triangular Geometry: The control arm adopts a classic triangular shape that distributes forces evenly across the joint, reducing stress concentrations and extending service life.

Integrated Ball Joints: Each end of the arm is fitted with high‑strength ball joints, allowing smooth articulation while resisting wear. These joints are engineered to accommodate both steering and suspension travel without compromising precision.

Pre‑Aligned Mounting Points: The mounting brackets on the arm are pre‑aligned to match OEM specifications, ensuring a seamless fit during installation and eliminating the need for extensive adjustments.

Materials & Construction

The ABS 210820 Track Control Arm is fabricated from high‑grade alloy steel, selected for its superior tensile strength and fatigue resistance. The material undergoes a rigorous heat‑treatment process followed by an anti‑corrosion coating, which protects against environmental degradation while maintaining a lightweight profile.

Surface Finish: A dual‑stage anodizing process provides both aesthetic appeal and additional protection against wear, rust, and UV exposure. The finish is compatible with most automotive paint systems, allowing for easy re‑painting if necessary.

Compatibility & Application

This component is specifically engineered for the front lower outer right position on Hyundai models such as the Getz, TB, and Click (model years 2001–2012). It also fits other vehicles that share similar suspension geometry, provided the mounting points and wheelbase dimensions align with OEM standards.

Installation Notes: The arm is designed for quick removal of the existing control arm. Standard torque specifications apply to all fasteners: Front Upper Ball Joint – 70 Nm, Rear Lower Ball Joint – 60 Nm. A calibrated torque wrench should be used to ensure consistent results.

Installation Procedure

1. Preparation: Secure the vehicle on a lift and remove the front wheel. Drain any fluid from the suspension if necessary.
2. Removal: Loosen the upper ball joint nut, then detach the lower arm by removing its mounting bolts. Carefully note the orientation of each bolt for reassembly.
3. Installation: Position the new ABS 210820 Track Control Arm in place, aligning the mounting holes with the chassis brackets. Tighten the bolts to the specified torque values.
4. Re‑attachment: Reconnect the upper ball joint and secure it with the appropriate nut. Verify that all fasteners are snug and free of play.
5. Alignment Check: Perform a wheel alignment test to confirm that camber, caster, and toe angles remain within manufacturer tolerances.

Maintenance Guidelines

Regular inspection is recommended to detect early signs of wear or corrosion. Inspect the ball joints for play and the mounting bolts for tightness every 10,000 miles (or as per service schedule). Clean the arm with a mild detergent and dry thoroughly before re‑applying any protective coating.

Performance Benefits

• Improved Handling: The robust construction reduces flex during cornering, providing sharper steering response.
• Enhanced Durability: High‑grade alloy steel and corrosion protection extend the lifespan compared to standard aftermarket alternatives.
• Consistent Alignment: Pre‑aligned mounting points help maintain wheel geometry over time, reducing uneven tire wear.
• Lightweight Design: Despite its strength, the arm remains relatively lightweight, contributing to overall vehicle efficiency.

Technical Specifications

Frequently Asked Questions

What vehicles can use the ABS 210820 Track Control Arm?

The arm is specifically designed for the front lower outer right position on Hyundai Getz, TB, and Click models from 2001 to 2012. It may also fit other cars with identical suspension geometry.

Is this component compatible with aftermarket wheels?

Yes, as long as the wheel hub spacing and mounting points remain unchanged. The arm’s design focuses on suspension integrity rather than wheel size.

Can I install this arm myself?

With proper tools and a basic understanding of suspension mechanics, a skilled DIY enthusiast can perform the installation. However, professional assistance is recommended for optimal alignment results.

What maintenance does the ABS 210820 require?

Periodic inspection for bolt tightness, ball joint play, and surface corrosion is sufficient. Cleaning with mild detergent and reapplying protective coating if necessary will keep the arm in top condition.

Conclusion

The ABS 210820 Track Control Arm delivers a blend of strength, precision, and durability tailored for Hyundai’s front‑wheel suspension systems. Its thoughtful design ensures that drivers experience consistent handling characteristics while enjoying extended component life. Whether restoring an older model or upgrading a current vehicle, this arm stands as a reliable choice for enthusiasts seeking performance without compromise.