ABS 2338-S Brake Drum

ABS 2338‑S Brake Drum

The ABS 2338‑S Brake Drum is a high‑performance component designed for the rear braking system of various Mitsubishi models, including the Lancer, Space Wagon, Space Runner, and Galant series. Engineered with precision, this drum delivers reliable stopping power while maintaining durability under demanding driving conditions.

Key Design Features

• Material Composition: Constructed from a hardened steel alloy that resists wear and corrosion, ensuring long‑term performance even in harsh environments.
• Diameter and Thickness: The drum measures 228 mm in diameter with a thickness calibrated to match OEM specifications for optimal heat dissipation and braking efficiency.
• Heat Management: Integrated venting channels reduce thermal buildup, preventing brake fade during extended use or high‑speed driving.
• Compatibility: Designed to fit the rear axle assemblies of Mitsubishi Lancer Mk III Station Wagon, Space Wagon, Space Runner, and Galant II/IV models. The drum’s mounting geometry aligns with OEM hub spacing for seamless installation.
• Surface Finish: A smooth inner surface provides consistent contact with brake shoes, while the outer surface is treated to resist oxidation and maintain a clean appearance.

Performance Characteristics

The ABS 2338‑S Brake Drum offers:

• Consistent Stopping Power: The drum’s uniform thickness ensures even brake shoe wear, translating to predictable braking performance across all driving scenarios.
• Reduced Noise and Vibration: Precision machining minimizes resonant frequencies that can cause squeal or rattling during operation.
• Enhanced Durability: The hardened steel alloy resists cracking and deformation, extending the drum’s service life even under heavy braking loads.

Installing the ABS 2338‑S Brake Drum involves a straightforward process that aligns with standard rear brake assembly procedures:

1. Remove Existing Drum: Detach the current drum by loosening the axle nut, removing the wheel, and sliding the old drum off the hub.
2. Inspect Hub and Brake Shoes: Verify that the hub surface is clean and free of burrs. Inspect brake shoes for wear; replace if necessary to match the new drum’s specifications.
3. Mount New Drum: Slide the ABS 2338‑S Drum onto the hub, ensuring it sits flush against the wheel flange. Align any mounting tabs or keyways with the hub’s corresponding features.
4. Tighten Fasteners: Secure the axle nut to the manufacturer’s torque specification, typically around 120 Nm, and reattach the wheel.
5. Brake Bedding: Perform a proper bedding procedure by applying moderate braking force while the vehicle is stationary, then gradually increasing pressure over several stops to condition the new drum and shoes.

• Regularly inspect brake fluid levels and replace as recommended to maintain hydraulic integrity.
• Check for signs of overheating, such as discoloration or a burnt odor, which may indicate excessive braking force or inadequate ventilation.
• Clean the drum surface with a non‑abrasive cleaner to remove brake dust and prevent corrosion.

The ABS 2338‑S Brake Drum is tailored for a range of Mitsubishi vehicles, ensuring that drivers receive consistent braking performance regardless of model year or trim level. Common applications include:

• Mitsubishi Lancer Mk III Station Wagon – rear axle assembly
• Mitsubishi Space Wagon and Space Runner – rear brake system
• Mitsubishi Galant II (A16) and Galant IV – rear drum compatibility
• Other Mitsubishi models with matching hub spacing and brake shoe dimensions

Opting for the ABS 2338‑S ensures:

• OEM Quality Assurance: Meets or exceeds original equipment specifications, guaranteeing that the braking system performs as intended by the manufacturer.
• Reliability Under Stress: The hardened steel construction withstands high temperatures and repeated braking cycles without compromising safety.
• Ease of Installation: Designed for a plug‑and‑play fit, reducing labor time and minimizing potential installation errors.
• Long-Term Value: Durable materials reduce the need for frequent replacements, offering cost savings over the vehicle’s lifespan.

The ABS 2338‑S Brake Drum stands out as a dependable component for rear braking systems in selected Mitsubishi models. Its robust construction, precise engineering, and compatibility with OEM standards make it an excellent choice for drivers seeking reliable stopping power and long-term performance.