A.B.S 271168 Wheel Suspensions

Product Overview

The A.B.S 271168 Wheel Suspension is a high‑performance control arm silent block designed to enhance vehicle handling and ride comfort. It serves as the critical interface between the wheel assembly and the chassis, absorbing road irregularities while maintaining precise alignment of the suspension components.

Key Design Features

Advanced Elastomeric Construction

The core of the A.B.S 271168 is a proprietary elastomer that offers exceptional damping characteristics. This material resists fatigue, temperature fluctuations, and chemical exposure, ensuring long‑term reliability.

Precision Machined Mounting Brackets

Each unit incorporates precision‑machined mounting brackets that fit seamlessly onto the vehicle’s chassis. The design accommodates a wide range of wheel sizes and axle configurations, making it suitable for both front‑ and rear‑wheel applications.

Low Profile Design

The suspension block features a low profile geometry that reduces unsprung weight without compromising structural integrity. This contributes to improved acceleration, braking, and cornering performance.

Materials & Construction

• Elastomer Core: High‑density polyurethane with reinforced carbon fibers for superior shock absorption.
• Metal Housing: Hardened steel alloy that resists corrosion and wear.
• Seals: Dual O‑rings made from nitrile rubber to prevent fluid ingress.

Compatibility & Applications

The A.B.S 271168 is engineered for a broad spectrum of automotive platforms. It is commonly used in models such as the Ford Mondeo (3rd generation) and other vehicles requiring robust wheel suspension solutions. The part can be installed on both front and rear axles, making it versatile for various driving dynamics.

Installation Guide

Preparation Steps

1. Secure the vehicle on a stable lift or jack stands.
2. Remove the wheel and disconnect the brake caliper to access the suspension assembly.
3. Clean the mounting area with a solvent to remove grease and debris.

Mounting Procedure

1. Position the A.B.S 271168 onto the chassis, aligning the mounting holes with the pre‑drilled slots.
2. Screw in the bolts to a torque specification of 80–90 Nm (consult your vehicle’s service manual for exact values).
3. Reinstall the brake caliper and wheel, then lower the vehicle.

Final Checks

• Verify that all bolts are tightened to spec.
• Inspect the elastomeric core for any visible damage or deformation.
• Perform a test drive at low speed to ensure smooth operation.

Performance Benefits

Installing the A.B.S 271168 Wheel Suspension delivers measurable improvements:

• Enhanced Ride Comfort: The elastomeric core dampens road vibrations, reducing cabin noise.
• Improved Handling: Precise alignment of suspension components leads to tighter steering response.
• Extended Component Life: Reduced mechanical stress on bearings and bushings lowers wear rates.

Maintenance & Longevity

Although the A.B.S 271168 is designed for durability, regular inspections can preempt potential issues:

• Check for oil or coolant leaks around the mounting area every 10,000 miles.
• Inspect the elastomeric core for cracks or hardening; replace if any signs of degradation appear.
• Re‑torque bolts annually to maintain optimal preload.

Technical Specifications

Frequently Asked Questions

What vehicles can use the A.B.S 271168?

The suspension block is compatible with a wide range of passenger cars, especially those requiring robust wheel support such as the Ford Mondeo (3rd generation). It can be adapted to both front and rear axle configurations.

How long does the elastomer core last?

Under normal driving conditions, the elastomer core typically lasts between 80,000–120,000 miles. However, aggressive driving or harsh environments may reduce this lifespan.

Can I replace only the elastomer core if it degrades?

No; the core is integral to the unit’s structure. Replacement requires a new A.B.S 271168 assembly.

Is professional installation recommended?

While the part can be installed by experienced DIYers, professional service ensures correct torque settings and alignment, maximizing performance benefits.

Conclusion

The A.B.S 271168 Wheel Suspension exemplifies engineering excellence in vehicle dynamics. Its advanced elastomeric core, precision mounting system, and low‑profile design collectively deliver superior ride quality, handling stability, and component longevity. Whether upgrading an existing setup or integrating into a new build, this suspension block is a reliable choice for automotive enthusiasts seeking performance and durability.