A.B.S 271395 Suspension Arm
The A.B.S 271395 Suspension Arm is a high‑performance component engineered for precision handling and durability in modern automotive suspensions. Designed to replace or upgrade the front or rear control arms of various vehicles, this part delivers consistent geometry, reduced flex, and improved ride quality.
Key Features
- Material Composition: Made from forged aluminum alloy with a proprietary heat‑treatment process that enhances strength while keeping weight low. The arm is anodized to resist corrosion and surface wear.
- Load Capacity: Rated for up to 4,500 lb (2,040 kg) of static load, making it suitable for both passenger cars and light commercial vehicles.
- Geometry Precision: CNC‑machined with tolerances within ±0.02 mm, ensuring accurate alignment of steering angles and camber settings.
- Integrated Bushings: Comes with dual polyurethane bushings that provide smooth articulation while dampening vibration and noise.
- Compatibility: Designed to fit a wide range of models including Mercedes‑Benz Classe A, B, CLA; Infiniti QX30, Q30; and other vehicles sharing the same suspension architecture. The part is available in both left‑hand drive (LHD) and right‑hand drive (RHD) variants.
- Installation Ease: Features pre‑drilled mounting holes that align with standard bolt patterns, reducing assembly time. Includes a set of torque specifications for each fastener to guarantee optimal preload.
Technical Specifications
| Dimension (mm) |
Length: 350 mm | Width: 45 mm | Height: 30 mm |
| Weight |
1.8 kg |
| Material |
Aluminum Alloy (7075‑T6) |
| Finish |
Anodized, anti‑corrosion coating |
| Bushing Material |
Polyurethane (PU) with high wear resistance |
| Torque Settings |
Fastener: 120 Nm | Bushing Retainer: 80 Nm |
| Operating Temperature Range |
-40 °C to +120 °C |
Installation Guide
- Preparation: Clean the mounting surfaces and remove any old bushings or debris. Verify that the vehicle’s suspension geometry matches the specifications for the A.B.S 271395 arm.
- Mounting: Align the pre‑drilled holes of the arm with the corresponding brackets on the chassis. Secure using the supplied bolts, tightening in a cross pattern to ensure even distribution of force.
- Bushing Installation: Insert the polyurethane bushings into the arm’s mounting points. Use a calibrated torque wrench to reach the specified preload values.
- Alignment Check: After installation, perform a wheel alignment test to confirm that camber, caster, and toe angles are within manufacturer tolerances.
- Final Inspection: Inspect all fasteners for proper torque and ensure there is no play in the arm’s movement. Verify that the suspension travel remains unchanged from factory settings.
Benefits of Choosing A.B.S 271395
- Enhanced Handling: The precise geometry reduces unwanted camber changes during cornering, providing tighter steering response.
- Reduced Noise & Vibration: Polyurethane bushings absorb road irregularities, leading to a quieter cabin experience.
- Longevity: High‑strength alloy and corrosion‑resistant finish extend the component’s service life even under harsh driving conditions.
- Weight Savings: Lightweight construction contributes to overall vehicle efficiency and performance.
- Versatility: Compatibility with multiple makes and models allows for easy upgrades or replacements across a fleet of vehicles.
Maintenance Recommendations
Regular inspection is advised, especially after driving on rough terrain. Check the bushings for signs of wear such as cracks or excessive play. Replace bushings every 30,000 km (or sooner if symptoms appear). Keep mounting bolts free from rust and ensure they remain tightened to the specified torque.
Applications
The A.B.S 271395 Suspension Arm is ideal for:
- Performance tuning of passenger cars seeking improved cornering stability.
- Commercial vehicles requiring robust suspension components that can withstand heavy loads.
- Aftermarket restoration projects where original parts are scarce or unavailable.
Conclusion
The A.B.S 271395 Suspension Arm exemplifies engineering excellence in automotive suspension design. With its combination of lightweight strength, precise geometry, and durable bushings, it delivers superior handling characteristics while maintaining reliability across a broad spectrum of vehicle platforms.