ABS K15847 Park Brake Cable

ABS K15847 Park Brake Cable

The ABS K15847 Park Brake Cable is a high‑performance component designed to provide reliable and consistent operation of the parking brake system in a wide range of vehicles, particularly those from the Subaru lineup. This cable features a robust steel core surrounded by a durable protective sheath that resists corrosion, abrasion, and extreme temperature variations.

Key Design Features

• Steel Core: The inner wire is made of high‑strength alloy steel, ensuring minimal stretch under load and maintaining precise brake engagement over the cable’s service life.
• Protective Sheath: A multi‑layer polymer coating shields the core from moisture, oil, and road salts, extending durability in both wet and dry climates.
• Pre‑Tensioned Length: The cable is manufactured with a calibrated pre‑tension that matches OEM specifications for Subaru models such as the Impreza, Leone II/III, and various station wagons.
• Standardized Diameter: With an outer diameter of 5.0 mm (±0.1 mm), the cable fits seamlessly into existing housing assemblies without modification.
• Low Friction Interface: The internal surface is engineered to reduce wear against pulleys and brackets, minimizing maintenance intervals.

Compatibility Overview

The ABS K15847 cable is specifically calibrated for the following Subaru models, but it can also be adapted to other vehicles with similar parking brake geometry:

• Subaru Impreza (all generations)
• Subaru Leone II & III
• Subaru Impreza Station Wagon
• Subaru Impreza Limo, Coupe, and Station variants (model years 1992‑2009)
• Other vehicles requiring a 5 mm diameter cable with a 1.8 m length range

Installation Guidelines

1. Preparation: Remove the existing parking brake cable and inspect the housing for damage or wear.
2. Alignment: Position the new ABS K15847 cable within the housing, ensuring that the ends are correctly oriented toward the brake drum pulleys.
3. Tensioning: Use a calibrated tension gauge to apply the manufacturer’s recommended preload (typically 200 N). Adjust until the parking brake engages at the correct lever position.
4. Securing: Fasten all retaining clips and brackets, verifying that no slack remains in the cable path.
5. Testing: Engage the parking brake fully, release, and repeat several cycles to confirm smooth operation without binding or excessive play.

Maintenance Tips

• Inspect the cable annually for signs of fraying, corrosion, or abnormal wear on the sheath.
• Lubricate the cable’s internal surfaces with a high‑temperature brake grease to reduce friction and extend service life.
• Avoid over‑tightening during installation; excessive tension can lead to premature failure.
• If the parking brake feels spongy or does not hold firmly, replace the cable immediately to prevent loss of braking capability.

Performance Benefits

The ABS K15847 Park Brake Cable delivers:

• Consistent engagement pressure across all operating temperatures.
• Reduced maintenance due to its corrosion‑resistant construction.
• Improved safety by ensuring reliable parking brake function in both stationary and dynamic driving conditions.

Technical Specifications

Conclusion

The ABS K15847 Park Brake Cable is engineered for durability, precision, and ease of installation in a variety of Subaru vehicles. Its high‑quality construction ensures that the parking brake remains reliable under all driving conditions, providing peace of mind to drivers who demand safety and performance from their vehicle’s braking system.