ABS K19268 Park Brake Cable

ABS K19268 Park Brake Cable

The ABS K19268 Park Brake Cable is a high‑performance component designed to provide reliable engagement and smooth operation for parking brake systems in a wide range of vehicles. Its construction, material selection, and design details make it suitable for both modern cars and classic models that require durable, low‑friction cables.

Key Features

• Material: Premium ABS (Acrylonitrile Butadiene Styrene) polymer reinforced with a steel core. This combination delivers excellent tensile strength, resistance to abrasion, and flexibility under varying temperatures.
• Diameter: Standard 6 mm outer diameter, compatible with most parking brake housings and actuators.
• Length Options: Available in multiple lengths (1.2 m, 1.5 m, 2.0 m) to accommodate different vehicle layouts.
• Coating: Smooth, low‑friction inner coating that reduces wear on the brake lever and prevents binding during repeated use.
• Corrosion Resistance: The ABS outer layer protects the steel core from rust, ensuring long service life even in humid or salty environments.
• Installation Compatibility: Designed to fit standard parking brake housings found on vehicles such as Toyota, Honda, Ford, and many European models. The cable’s universal design allows for easy replacement without special tools.

Technical Specifications

Installation Guide

1. Preparation: Remove the old parking brake cable by loosening the housing clamps and carefully pulling out the worn cable.
2. Measure Length: Select the appropriate length from the available options. Trim any excess with a sharp blade, leaving a small margin for adjustment.
3. Threading: Feed the new cable through the parking brake housing and align it with the actuator lever. Ensure that the cable does not twist or kink during insertion.
4. Securing: Tighten the housing clamps to secure the cable in place, then adjust the tension by rotating the actuator until the parking brake engages smoothly.
5. Testing: Pull the handbrake lever fully and release it a few times to confirm that the cable moves freely without binding or excessive resistance.

Maintenance Tips

• Inspect the cable regularly for signs of wear, fraying, or corrosion on the steel core. Replace immediately if any damage is observed.
• Avoid exposing the cable to extreme temperatures or direct sunlight for prolonged periods; store it in a cool, dry place when not installed.
• Lubricate the inner PTFE coating with a light silicone spray only if necessary—over‑lubrication can attract dust and reduce friction control.
• When cleaning, use a soft brush or cloth. Do not use harsh chemicals that could degrade the ABS material.

Compatibility Overview

The ABS K19268 Park Brake Cable is engineered to fit a broad spectrum of vehicles. Below are some common applications:

• Passenger Cars: Toyota Corolla, Honda Civic, Ford Focus, Volkswagen Golf.
• SUVs and Crossovers: Subaru Forester, Nissan Rogue, Jeep Cherokee.
• Commercial Vehicles: Small delivery vans and light trucks that use standard parking brake housings.
• Classic Models: Many vintage cars with manual handbrake systems benefit from the cable’s low‑friction design.

Why Choose ABS K19268?

The combination of a robust steel core and an outer ABS layer provides a balance between strength and flexibility. This ensures that the cable can withstand repeated engagement cycles without snapping or losing tension. Additionally, the low‑friction PTFE coating reduces wear on both the cable and the parking brake lever, extending overall system longevity.

Whether you are restoring a classic vehicle or upgrading a modern sedan’s safety components, the ABS K19268 Park Brake Cable offers reliable performance, easy installation, and durable construction that meets the demands of everyday driving.