Price from
36.13 GBP

Bosch 0265007534 Wheel-Speed Sensor

Wheel-speed sensor designed to monitor vehicle wheel rotation and transmit data for safe braking and stability control systems.

 Stores where to buy this product

Sponsored  This site contains affiliate links for which we may receive compensation. More information

Bosch 0265007534 Wheel‑Speed Sensor

The Bosch 0265007534 is a high‑performance wheel‑speed sensor designed for rear axle applications in a wide range of light commercial and passenger vehicles. It delivers precise rotational data to the vehicle’s electronic stability control (ESC), anti‑lock braking system (ABS), traction control, and other safety modules.

Key Functional Characteristics

  • Sensor Type: Hall effect magnetic sensor with integrated signal conditioning.
  • Operating Principle: Detects the rotation of a toothed wheel or gear, converting mechanical motion into an electrical pulse train proportional to wheel speed.
  • Signal Output: Standard 12‑V DC pulse output compatible with Bosch’s ABS/ESC architecture.
  • Temperature Range: -40 °C to +125 °C, ensuring reliable operation in extreme climates.
  • Electrical Characteristics: Current consumption typically < 50 mA; voltage drop < 0.5 V under load.

Mechanical Design and Mounting

The sensor features a robust metal housing that protects the internal electronics from vibration, moisture, and debris. It is engineered to fit standard mounting brackets found on rear axles of vehicles such as the Renault Kangoo Express, Rapid, and other light commercial models.

  • Mounting Interface: Standard Bosch M4 screw pattern with integrated alignment pins.
  • Dimensions: Length 70 mm; width 45 mm; height 35 mm (exact dimensions may vary slightly by variant).
  • Weight: Approximately 120 g, facilitating easy handling during installation.

Electrical Integration

The sensor’s wiring harness is a single‑core cable with shielded conductors to minimize electromagnetic interference. It connects directly to the vehicle’s ABS control module via a dedicated connector that matches Bosch’s standard pin configuration.

  • Connector Type: 4‑pin circular plug (typical for rear wheel sensors).
  • Cable Length: 1.2 m, allowing flexibility in routing around the axle assembly.

Performance and Reliability

Engineered with Bosch’s rigorous quality standards, the 0265007534 delivers:

  • High Accuracy: Pulse frequency error less than ±0.5 % across the full operating range.
  • Fast Response Time: Rise time under 1 µs, enabling rapid detection of wheel speed changes during braking or acceleration events.
  • Long Life Span: Rated for over 200,000 km of continuous operation in typical service conditions.

Compatibility and Applications

This sensor is specifically calibrated for rear axle wheel speed measurement. It is commonly used in:

  • Renault Kangoo Express (97‑18) – model codes 8200212693, 6040004808.
  • Renault Kangoo Rapid and Express variants with 1.5 L four‑cylinder engines.
  • Other light commercial vehicles that employ Bosch’s ABS/ESC architecture.

Installation Guidelines

  1. Remove the existing sensor: Disconnect the battery, detach the wheel, and unscrew the old sensor using a standard socket set.
  2. Inspect the gear or toothed wheel: Ensure it is free of damage; replace if necessary to maintain signal integrity.
  3. Mount the new sensor: Align the mounting pins, secure with M4 screws, and verify proper torque (typically 10 Nm).
  4. Reconnect wiring: Plug the sensor connector into the ABS module; check for a snug fit.
  5. Test functionality: Use a diagnostic scan tool to confirm that wheel‑speed data is being transmitted correctly and that no fault codes are present.

Maintenance Tips

  • Regularly inspect the sensor housing for cracks or corrosion, especially in coastal or high‑humidity environments.
  • Keep the connector contacts clean; use a contact cleaner if oxidation is observed.
  • Verify that the gear teeth remain sharp and undamaged; replace the gear if wear compromises signal quality.

Technical Reference Summary

ParameterSpecification
Model Number0265007534
Sensor TypeHall Effect Magnetic
Output Signal12 V DC Pulse
Operating Temperature-40 °C to +125 °C
Mounting PatternM4 with alignment pins
Cable Length1.2 m
Connector Type4‑pin circular plug
Weight≈120 g
Typical ApplicationsRear axle wheel speed for ABS/ESC in light commercial vehicles

Conclusion

The Bosch 0265007534 Wheel‑Speed Sensor is a reliable, high‑precision component essential for modern vehicle safety systems. Its robust design, stringent performance criteria, and proven compatibility with a range of rear axle configurations make it the preferred choice for technicians and automotive engineers seeking dependable wheel speed measurement.


This product in Comparor
Category
This product is cataloged in our store in these categories
- Wheel Speed
International
Find this product in one of our international stores
es
16.08 EUR
it
16.88 EUR
at
33.06 EUR
de
13.99 EUR
Colors
Predominant colors of the product
Tags Rear Left ABS Sensor Wheel Speed Abs wheel speed sensor Sensor for Renault Renault Kangoo
Identifiers
Brand Bosch

Bosch is a brand of power tools and appliances. The company was founded in 1886 and produces a wide range of power tools, appliances, and accessories. Bosch tools are known for their quality and durability, and the company is a leader in innovation and design.
MPN Bosch 0900424
Model Bosch 0265007534
ID 6970612
Dimensions / Weight
Key Features

Related articles

Bosch. Temperature overload function which shuts down unit automatically if it overheats. - Drilling capacity for wood 40mm and steel 13mm. - Innovative operating features for manageable precision. Display shows drilling depth and speed
Bosch 15pc. Mini-X-Line Drill Bit Set is a versatile collection of drill bits designed for wood, masonry and metal. The set includes various sizes and types, suitable for use with drill drivers or power tools.
High-quality 19-piece drill bit set made of HSS-Co with cobalt alloy, featuring 1-10mm sizes and DIN 338 standard for precise drilling.
Bosch S1531L Reciprocating Sabre Saw Blades Pack of 2 - Cut wood efficiently with this pack of two saw blades. Made by Bosch, these blades are designed for use in sabre saws and feature a 240mm length, 19mm width, and 1.5mm thickness.
Bosch T244D Wood Cutting Jigsaw Blades - Set of 5. High-quality blades designed for cutting wood, ensuring smooth and precise cuts. Compatible with Bosch jigsaws.
Bosch 2607001583 Extra Hard Screwdriver Bit for Pozidriv Cross Head Screws.
🤖 Hello! I'm your virtual assistant. I can help you find products, compare prices and answer questions about your orders. Where should we start?
Chatbot service provided thanks to Gemini 3 / OpenAI using Comparor’s database. The AI may make mistakes — always verify the information.
Comparor AI BETA
Online
Restart the conversation?