Bosch 1987482102 Brake Cable

Bosch 1987482102 Brake Cable

The Bosch 1987482102 Brake Cable is a high‑performance component designed for the precise operation of vehicle braking systems. It serves as the mechanical link between the driver’s brake lever or pedal and the hydraulic or mechanical actuators that engage the brakes. This cable is engineered to provide reliable, smooth, and consistent force transmission under a wide range of operating conditions.

Key Features

• Durable Construction: Made from high‑strength steel wire with an inner core that resists corrosion and wear. The outer sheath is reinforced to protect against abrasion, temperature extremes, and environmental exposure.
• Optimal Length: Standard length of 1.592 mm (approximately 1592 mm) ensures compatibility with a broad range of vehicle models, particularly those in the Opel Astra G family and similar platforms.
• Low Friction Design: The cable’s internal geometry reduces friction between the wire and sheath, enabling smoother lever action and minimizing maintenance requirements.
• High Load Capacity: Capable of withstanding the forces required for both emergency braking and routine parking brake operation without deformation or failure.
• Compatibility: Designed to fit seamlessly into existing Bosch brake systems, including handbrake assemblies, parking brakes, and auxiliary braking circuits in automotive applications.

Technical Specifications

Installation Overview

The installation of the Bosch 1987482102 Brake Cable follows standard automotive procedures. Below is a concise guide to ensure proper fitment and performance:

1. Preparation: Remove the existing cable by loosening the terminal nuts on both ends. Carefully detach any retaining brackets or clips.
2. Cable Routing: Feed the new cable through the designated path, ensuring it follows the original routing without kinks or sharp bends that could increase friction.
3. Securing Terminals: Attach the cable to the brake lever or pedal using the supplied threaded fittings. Tighten to manufacturer specifications, typically around 30 Nm torque.
4. Adjustment: Once both ends are secured, adjust the cable tension so that the handbrake lever has a smooth travel range and releases fully when disengaged.
5. Testing: Engage the brake system to confirm proper operation. Verify that the braking force is consistent and that there is no excessive play or binding.

Maintenance Tips

• Inspect the cable periodically for signs of wear, corrosion, or fraying. Replace immediately if any damage is observed.
• Keep the cable path clean from debris and moisture to prevent premature degradation.
• Avoid over‑tightening terminal nuts, as this can stress the cable core and lead to failure.

Applications

The Bosch 1987482102 Brake Cable is ideal for:

• Handbrake systems in passenger cars, especially those within the Opel Astra G series.
• Parking brake assemblies requiring a reliable mechanical link.
• Custom or aftermarket installations where OEM specifications must be met.

Why Choose Bosch?

Bosch is renowned for its commitment to quality, precision engineering, and rigorous testing standards. Selecting the 1987482102 Brake Cable ensures:

• Consistent performance across varying environmental conditions.
• Compatibility with a wide range of vehicle models without modification.
• Reliability backed by decades of automotive expertise.

Conclusion

The Bosch 1987482102 Brake Cable exemplifies the brand’s dedication to safety and performance. Its robust construction, precise engineering, and proven compatibility make it a dependable choice for any vehicle requiring a high‑quality brake cable solution.