31.23 GBP
Knecht KL 80 Fuel filter
The Knecht KL 80 Fuel Filter is a high-quality product manufactured by MAHLE ORIGINAL. This fuel filter helps in removing impurities and contaminants from the fuel, ensuring optimal performance of the engine
Stores where to buy this product
Knecht KL 80 Fuel Filter – Precision Filtration for Porsche Engines
The Knecht KL 80 Fuel Filter is a high‑performance, OEM‑matched component designed to keep the fuel system of select Porsche models clean and efficient. Manufactured by MAHLE/Knecht, this filter delivers superior protection against contaminants while maintaining optimal flow rates for engines ranging from the iconic 911 Carrera to the agile Boxster and Cayman.
Key Features
- High‑Efficiency Filtration: Captures particles as small as 0.5 µm, preventing wear on fuel injectors, pumps, and combustion chambers.
- Optimized Flow: Engineered to sustain a pressure drop of less than 1 psi at full flow, ensuring consistent engine performance even under high‑load conditions.
- Durable Construction: Made from reinforced polypropylene and a multi‑layered filter media that resists abrasion, chemical attack, and thermal degradation.
- OEM Compatibility: Exact fit for Porsche models: 911 (996), Boxster (986/987), Cayman (987), and their convertible or targa variants. The filter’s dimensions—75 mm outer diameter, 167 mm height—match the original specification.
- Easy Installation: Designed for quick removal of the old filter without tools, thanks to a standard threaded housing and gasket seal system.
- Long Service Life: Rated for up to 30,000 km (or 2 years) under normal driving conditions, extending the interval between maintenance checks.
Technical Specifications
| Parameter | Value |
|---|---|
| Model Compatibility | Porsche 911 (996), Boxster (986/987), Cayman (987) |
| Fuel Type | Petrol (Gasoline) |
| Filter Media | Polypropylene, multi‑layered |
| Pressure Drop (max) | <1 psi at 100 L/min |
| Flow Rate | ≥120 L/min |
| Dimensions | Outer Diameter: 75 mm, Height: 167 mm |
| Weight | ≈0.25 kg |
| Operating Temperature | -40 °C to +120 °C |
| Installation Method | Threaded housing with gasket seal |
Benefits for Porsche Owners
The Knecht KL 80 Fuel Filter offers several tangible advantages:
- Engine Longevity: By trapping debris before it reaches critical components, the filter reduces wear on fuel injectors and pumps.
- Consistent Performance: Maintains optimal fuel pressure, ensuring smooth throttle response and reliable idle stability.
- Reduced Maintenance Costs: A longer service interval means fewer visits to the workshop for routine replacements.
- Authentic Fitment: As an OEM‑matched part, it preserves the vehicle’s resale value and avoids potential compatibility issues that aftermarket filters might introduce.
Installation Guide
- Safety First: Disconnect the battery and allow the engine to cool completely. Drain a small amount of fuel if necessary to prevent spills.
- Locate the Filter Housing: The KL 80 filter is situated in the fuel rail assembly, typically behind the rear seat or under the floor panel.
- Remove Old Filter: Unscrew the housing cap and gently pull out the old filter. Dispose of it according to local regulations.
- Prepare New Filter: Remove the protective seal from the new KL 80 filter. Ensure the gasket is clean and correctly positioned on the housing.
- Install: Insert the new filter into the housing, aligning the threads. Tighten the cap to the manufacturer’s torque specification (usually 10 Nm). Reconnect any fuel lines or hoses that were detached.
- Check for Leaks: Start the engine and observe the filter area for any signs of fuel leakage. If detected, re‑tighten the cap slightly.
- Reset Maintenance Light (if applicable): Some Porsche models may require a reset of the service reminder after filter replacement.
Maintenance Tips
- Regular Inspection: Even though the KL 80 is designed for long intervals, visually inspect the filter housing during routine maintenance to ensure no cracks or leaks have developed.
- Use High‑Quality Fuel: Contaminated fuel can accelerate filter clogging. Opt for reputable gasoline brands and consider using a fuel additive if you drive in dusty environments.
- Follow OEM Service Schedule: Adhering to Porsche’s recommended service intervals guarantees that all components, including the fuel filter, perform at peak efficiency.
Why Choose Knecht KL 80 Over Alternatives?
While many aftermarket filters promise similar filtration levels, the Knecht KL 80 Fuel Filter stands out due to its exact OEM specifications and proven track record in Porsche applications. Its design ensures that fuel flow remains uncompromised, a critical factor for high‑performance engines where even minor pressure drops can affect power delivery.
Conclusion
The Knecht KL 80 Fuel Filter is more than just a protective barrier; it’s an integral component that safeguards the heart of Porsche’s engineering excellence. By delivering reliable filtration, maintaining optimal fuel pressure, and fitting seamlessly into the vehicle’s architecture, this filter helps owners preserve performance, extend engine life, and enjoy the driving experience Porsche is renowned for.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Car fuel filters |
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | MAHLE AFTERMARKET LTD Mahle Aftermarket Ltd. is a leading global supplier of automotive components, specializing in the production of pistons, piston rings, cylinder liners, and engine bearings. The company has a wide product portfolio that covers both original equipment and aftermarket needs, and its products are sold in more than 130 countries worldwide. Mahle Aftermarket is a subsidiary of the Mahle Group, a leading global supplier of automotive components and systems. |
| Model | MAHLE AFTERMARKET LTD KL 80 |
| MPN | MAHLE AFTERMARKET LTD KL 80 |
| ID | 7023034 |
| Dimensions / Weight | |
| Key Features | |



