Lemforder 3012701 Steering Boot Kit

Lemforder 3012701 Steering Boot Kit

The Lemforder 3012701 Steering Boot Kit is a high‑performance component designed to protect the steering rack and associated linkages on Volkswagen Transporter, T4, IV Bus, and related models. This kit replaces worn or damaged rubber boots that are critical for maintaining proper lubrication, preventing water ingress, and safeguarding against debris.

Key Features

• Durable Construction: Made from premium synthetic rubber with reinforced layers to resist abrasion, UV exposure, and temperature extremes.
• Exact Fit: Engineered specifically for the VW Transporter series (70A, 70H, 7DA, 7DH, 70B, 70C, 7DB, 7DK, 70J, 70K, 7DC, 7DJ) and compatible with T4 box variants.
• Dual‑Side Coverage: Provides protection on both the left and right sides of the steering rack for comprehensive sealing.
• Easy Installation: Includes all necessary hardware (clips, seals, and mounting brackets) to simplify replacement without specialized tools.
• Enhanced Sealing: Features a double‑layer gasket design that ensures long‑term watertightness even under high vibration conditions.

Technical Specifications

Benefits of Replacing Your Steering Boots

Worn steering boots can lead to a cascade of mechanical issues. By installing the Lemforder 3012701 kit, you gain:

• Improved Steering Precision: Eliminates play caused by leaking grease and contamination.
• Reduced Maintenance Costs: Prevents premature wear on bearings and linkages.
• Enhanced Safety: Maintains consistent steering response, crucial for heavy commercial vehicles.
• Longevity: Extends the service life of the entire steering system by protecting critical components from environmental damage.

Installation Overview

The kit is designed for straightforward installation. Below is a step‑by‑step guide that can be followed with basic mechanical knowledge:

1. Preparation: Park the vehicle on a level surface, engage the parking brake, and lift the front end using a jack. Secure with jack stands.
2. Remove Old Boots: Detach the existing rubber boots by loosening the mounting clips or screws. Carefully pull them away from the steering rack to avoid damaging the metal surfaces.
3. Clean the Surface: Use a degreaser and a clean cloth to remove any residual grease, dirt, or old sealant from the rack area.
4. Install New Boots: Position each boot onto its corresponding side of the steering rack. Align the reinforced seam with the mounting flange.
5. Secure Fasteners: Tighten all provided clips and screws to the manufacturer’s torque specifications (typically 12 Nm).
6. Check Alignment: Verify that the boots sit flush against the rack without gaps. Ensure no interference with adjacent components.
7. Lower Vehicle: Remove jack stands, lower the vehicle, and perform a test drive to confirm smooth steering operation.

Compatibility Summary

The Lemforder 3012701 kit is tailored for a wide range of Volkswagen commercial models. Below is a concise compatibility matrix:

Maintenance Tips After Installation

• Inspect the boots annually for signs of cracking or wear.
• Keep the steering system lubricated with manufacturer‑recommended grease.
• Avoid driving through deep water without checking boot integrity first.
• Replace boots promptly if any leakage is observed to prevent contamination.

Conclusion

The Lemforder 3012701 Steering Boot Kit delivers reliable protection for the steering rack of Volkswagen commercial vehicles. Its robust construction, precise fit, and ease of installation make it an essential upgrade for fleet operators seeking to maintain vehicle performance, safety, and longevity.