Lesjöfors 4215635 Suspension Spring

Lesjöfors 4215635 Suspension Spring – A Comprehensive Overview

The Lesjöfors 4215635 Suspension Spring is a high‑performance coil spring designed for the rear axle of several popular compact and mid‑size vehicles, including models from Citroën, Mitsubishi, and Peugeot. Its engineering focuses on delivering consistent ride quality, precise handling, and durability under varying load conditions.

Key Design Features

• Helical Coil Construction: The spring’s helical shape provides smooth compression and rebound characteristics, essential for maintaining tire contact with the road surface during cornering and braking.
• Optimized Spring Rate: Engineered to match the original equipment specifications of its target vehicles, ensuring that the vehicle’s suspension geometry remains unchanged while improving ride comfort.
• High‑Strength Steel Core: Utilizes a hardened steel wire that resists fatigue and elongation over time, extending the service life compared to standard aftermarket options.
• Precision Manufacturing Tolerances: Each spring is produced with strict dimensional control, guaranteeing compatibility with OEM mounting points and retaining the vehicle’s original handling dynamics.

Vehicle Compatibility

The Lesjöfors 4215635 is specifically engineered for rear axle applications in a range of models. Below are the primary vehicles that benefit from this spring:

• Citroën C‑Crosser (2007–2012) – Both VU and VV variants.
• Mitsubishi Outlander II (2006–2013) – Including the CW_W, C-Cross, and 2.2 DI-D 4WD trims.
• Peugeot 4007 (2007–2013) – Models equipped with 2.0L or 2.4L engines.

These vehicles share a common rear suspension architecture, allowing the Lesjöfors spring to seamlessly replace OEM components without requiring additional modifications.

Installation Overview

1. Remove Existing Spring: Safely lift the vehicle and detach the current coil spring from the rear axle assembly. Use a spring compressor tool to avoid injury.
2. Inspect Mounting Points: Check for wear or damage on the mounting brackets and ensure they are clean before installation.
3. Install Lesjöfors Spring: Position the new spring onto the axle, aligning it with the OEM mounting holes. Secure using the provided hardware or equivalent fasteners.
4. Reassemble Suspension: Reinstall any removed components such as shock absorbers or sway bars, ensuring all bolts are torqued to specification.
5. Test Ride: Conduct a short drive to confirm proper operation and listen for any unusual noises. Adjust if necessary.

Performance Benefits

• Improved Handling: The spring’s calibrated rate reduces body roll during aggressive cornering, providing drivers with tighter steering response.
• Enhanced Comfort: By absorbing road irregularities more effectively, the Lesjöfors spring smooths out bumps and potholes, resulting in a more pleasant ride for occupants.
• Long‑Term Durability: The high‑strength steel core resists permanent deformation, maintaining consistent performance over thousands of miles.
• Consistent Ride Height: Precise manufacturing ensures that the vehicle’s ride height remains unchanged from OEM specifications, preserving aerodynamics and safety clearances.

Maintenance Tips

While the Lesjöfors 4215635 is designed for longevity, regular inspection can help detect early signs of wear:

• Visual Check: Look for visible cracks or excessive elongation on the spring wire.
• Compression Test: Measure the spring’s compression under load to confirm it remains within spec.
• Lubrication: Apply a light coat of silicone spray to the mounting surfaces to reduce friction during movement.

Why Choose Lesjöfors?

The Lesjöfors brand is synonymous with quality in the automotive suspension market. Their commitment to engineering excellence ensures that each component, including the 4215635 spring, meets rigorous performance standards. By selecting this product, vehicle owners can trust that they are receiving a part that not only matches but often surpasses OEM specifications.

Conclusion

The Lesjöfors 4215635 Suspension Spring stands out as a reliable, high‑performance solution for rear axle applications in Citroën C‑Crosser, Mitsubishi Outlander II, and Peugeot 4007 models. Its precise design, durable construction, and proven compatibility make it an excellent choice for drivers seeking to maintain or enhance their vehicle’s handling characteristics without compromising ride comfort.