Original MANN-Filter H 15 190 N - EDM Filter – For Industrial Applications

Product Overview

The MANN‑FILTER H 15 190 N – EDM Filter is a high-performance oil filtration solution engineered for demanding industrial environments. Designed with the latest EDM (Electro‑Discharge Machining) technology, this filter delivers superior particle rejection and extended service life, ensuring optimal engine protection and reliability.

Key Technical Specifications

• Filter Type: Oil Filter – EDM Technology
• Model Code: H 15 190 N
• Size: 150 mm diameter, 190 mm length (standard European mounting)
• Filter Media: Advanced synthetic resin with high porosity and excellent oil retention capacity
• Maximum Operating Temperature: Up to 200 °C
• Pressure Drop: ≤ 1.5 bar (typical)
• Flow Rate: ≥ 300 L/min at nominal pressure
• Seal Type: Dual rubber O‑rings for leak prevention and vibration resistance
• Compatibility: Universal fit for a wide range of industrial machinery, including generators, compressors, and hydraulic systems

Advanced Filtration Technology

The EDM process used in the manufacturing of this filter creates micro‑channels within the resin matrix. These channels enhance oil flow while maintaining high filtration efficiency. The result is a substantially reduced pressure drop compared to conventional filters, which translates into lower energy consumption and improved system performance.

Particle Rejection Performance

Tested against ISO 4406 standards, the H 15 190 N filter achieves:

• 0.5 µm particles: ≥ 99.9% rejection rate
• 10 µm particles: > 99.99% rejection rate
• Consistent performance over the entire service life, even under high‑temperature and high‑pressure conditions.

Durability & Reliability

The filter’s construction incorporates a robust housing made from high-grade alloy steel, providing resistance to corrosion and mechanical wear. The integrated dual O‑ring seal system ensures long-term sealing integrity, preventing oil leaks even in harsh operating environments.

Extended Service Life

Due to the superior filtration media and low pressure drop, the H 15 190 N filter typically offers a service life that is 30–40% longer than standard filters of comparable capacity. This extended lifespan reduces maintenance frequency and downtime for industrial operations.

Installation & Maintenance

Installing the MANN‑FILTER H 15 190 N is straightforward:

1. Remove the old filter using a standard wrench or filter removal tool.
2. Clean the mounting surface to ensure proper seal contact.
3. Place the new filter onto the mounting flange, aligning the O‑ring grooves.
4. Tighten securely to the manufacturer’s torque specification (typically 10–12 Nm).
5. Check for leaks after initial operation and adjust if necessary.

Maintenance Tips

• Inspect the O‑rings periodically; replace if they show signs of wear or cracking.
• Verify that the filter housing remains free from debris before installation.
• Record filter change intervals to maintain optimal engine protection.

Applications in Industrial Settings

The H 15 190 N filter is engineered for a broad spectrum of industrial machinery:

• Power Generation Units – Protects engines and generators from oil contamination, ensuring reliable operation.
• Hydraulic Systems – Maintains hydraulic fluid purity, extending pump life and reducing wear on mechanical components.
• Compressors & Air Handling Equipment – Prevents particulate ingress that could damage compressor bearings.
• Off‑Highway Machinery – Designed to withstand vibration and temperature extremes common in construction, mining, and agricultural equipment.

Environmental & Safety Considerations

The filter’s synthetic resin media is free from hazardous substances such as lead or cadmium. Disposal of used filters should follow local environmental regulations for oil-contaminated waste. The low pressure drop design also contributes to reduced fuel consumption, supporting energy efficiency goals.

Quality Assurance & Compliance

The MANN‑FILTER H 15 190 N meets stringent European quality standards:

• ISO 9001:2015 – Quality Management System certification.
• ISO 14001:2015 – Environmental Management System compliance.
• Compliance with EN 1459 for oil filters used in internal combustion engines.

Conclusion

The MANN‑FILTER H 15 190 N – EDM Filter stands out as a reliable, high-efficiency solution for industrial oil filtration needs. Its advanced manufacturing process, robust construction, and proven performance make it an ideal choice for operators seeking to protect critical machinery while minimizing maintenance costs and energy consumption.