Original MANN-FILTER Oil Filter W 13 110 – For Trucks, Buses and Utility Vehicles

Original MANN‑FILTER Oil Filter W 13 110 – Engine Protection for Heavy‑Duty Vehicles

The MANN‑FILTER Oil Filter W 13 110 is engineered specifically for the demanding environments of trucks, buses and utility vehicles. Designed as a direct replacement for OEM filters, it delivers uncompromised filtration performance while maintaining the high reliability that commercial fleets require.

Key Design Features

• High‑Capacity Filter Media: The filter uses a multi‑layered media system that captures particles as small as 0.5 µm, ensuring engine oil remains free of contaminants that can cause wear or failure.
• Robust Construction: Constructed with a durable polypropylene housing and reinforced gasket, the filter withstands the vibration and temperature extremes typical in heavy‑duty operations.
• Optimized Flow Resistance: The media layout balances filtration efficiency with low pressure drop, preserving engine performance and fuel economy.
• Standard M42x2 Thread: The screw‑on design uses the industry standard M42 × 2 thread, guaranteeing a secure fit on a wide range of engines without the need for adapters.

Compatibility Overview

The W 13 110 is specifically tailored for large displacement diesel engines found in:

• DAF 75 CF series – including PF183M, PF212M and PF235M models (9.2 L, 6‑cylinder).
• Other heavy‑duty chassis that employ the M42 × 2 thread specification.

Because it matches OEM specifications exactly, the filter can be installed without modification to engine mounts or oil lines.

Installation Guide

1. Drain Engine Oil: Safely lower the vehicle and drain the existing oil into a suitable container.
2. Remove Old Filter: Unscrew the current filter using an appropriate wrench. Be prepared for residual oil to spill.
3. Prepare New Filter: Remove the protective seal from the new W 13 110 and apply a thin layer of fresh engine oil to the gasket surface to ensure a proper seal.
4. Screw In: Hand‑tighten the filter until it is snug, then give an additional quarter turn with the wrench. Avoid overtightening which can damage the gasket.
5. Refill Oil: Refill the engine with the manufacturer’s recommended oil type and quantity.
6. Check for Leaks: Start the engine, let it reach operating temperature, and inspect the filter area for any signs of leakage.

Performance Benefits

• Extended Engine Life: By trapping fine particulates, the filter reduces abrasive wear on bearings, pistons and valve components.
• Consistent Oil Quality: Maintains optimal viscosity and prevents sludge formation, which can impair fuel injection systems.
• Reduced Maintenance Intervals: The high‑capacity media allows for longer service intervals compared to standard filters, lowering downtime.
• Fuel Efficiency: Low pressure drop preserves engine efficiency, contributing to better mileage over long hauls.

Maintenance Tips for Fleet Operators

• Schedule filter changes at the manufacturer’s recommended interval or sooner if operating in high‑dust environments.
• Inspect the gasket seal before each replacement; replace it if cracked or worn to prevent leaks.
• Use only genuine MANN‑FILTER oils and lubricants that meet the engine’s specifications to avoid compatibility issues.
• Keep a log of filter replacements to track service history and identify any patterns of accelerated wear.

Why Choose the Original MANN‑FILTER W 13 110?

The original MANN‑FILTER brand is synonymous with quality in the automotive filtration industry. By selecting the W 13 110, fleet managers can rely on:

• Authentic Performance: No compromises on media density or housing integrity.
• Compliance with OEM Standards: Meets or exceeds the specifications set by vehicle manufacturers.
• Global Availability: Readily stocked in major service centers worldwide, ensuring quick replacements during operations.

In summary, the MANN‑FILTER Oil Filter W 13 110 offers a dependable, high‑performance solution for trucks, buses and utility vehicles that demand consistent engine protection and minimal downtime. Its precise engineering, robust construction, and proven filtration capabilities make it an essential component in any heavy‑duty maintenance program.