Original MANN-FILTER Oil Filter WP 962/3 x – Oil filter set with gasket / gasket set – For utility vehicles

Original MANN‑FILTER Oil Filter WP 962/3 x – Comprehensive Overview

The MANN‑FILTER Oil Filter WP 962/3 x is a premium oil filter set with gasket, specifically engineered for utility vehicles. This product delivers exceptional filtration performance, ensuring that engine oil remains clean and free from contaminants over extended periods.

Key Features & Technical Specifications

• Model: WP 962/3 x
• Type: Oil filter set with gasket (gasket included)
• Application: Utility vehicles – trucks, vans, and commercial machinery
• Filter Media: High‑grade synthetic fiber that captures particles down to 0.5 µm
• Flow Rate: Designed for optimal oil flow while maintaining filtration integrity
• Pressure Drop: Low resistance, ensuring efficient engine performance
• Dimensions: Standard size compatible with most OEM and aftermarket housings (exact dimensions available upon request)
• Material: Durable polypropylene housing with reinforced gasket seal
• Compliance: Meets or exceeds MANN‑FILTER quality standards and industry regulations for commercial vehicles

Benefits of Using the WP 962/3 x Oil Filter Set

The WP 962/3 x delivers a range of advantages that make it an ideal choice for fleet operators and maintenance professionals:

• Extended Service Intervals: The high‑capacity filter media allows for longer periods between oil changes, reducing downtime.
• Superior Contaminant Removal: Captures fine particles, sludge, and metallic debris that can damage engine components.
• Consistent Oil Flow: Maintains optimal pressure and flow rates, preserving engine efficiency.
• Reliable Seal: The gasket set ensures a leak‑free installation, preventing oil loss and contamination.
• Compatibility: Fits a wide range of utility vehicle models from major manufacturers such as Volvo, Ford, General Motors, Fiat, and others.

Installation Guide

Installing the WP 962/3 x Oil Filter Set is straightforward when following these steps. Always refer to your vehicle’s service manual for specific torque specifications.

1. Preparation: Warm up the engine to normal operating temperature, then shut off and allow it to cool slightly before proceeding.
2. Drain Old Filter: Carefully remove the existing oil filter. Dispose of the old filter responsibly.
3. Clean the Mounting Surface: Wipe the filter housing area with a clean rag to remove any debris or old gasket material.
4. Apply Gasket: Place the supplied gasket onto the mounting surface, ensuring it sits flush and evenly.
5. Install New Filter: Screw the WP 962/3 x filter into place by hand until snug. Then use a torque wrench to tighten to the manufacturer’s recommended setting.
6. Check for Leaks: Start the engine and observe the filter area for any signs of oil leakage. Tighten further if necessary.

Maintenance Tips

• Inspect the gasket seal periodically for wear or damage, especially after heavy-duty use.
• Replace the filter at recommended intervals based on mileage and operating conditions.
• Use high‑quality engine oil that meets OEM specifications to complement the filter’s performance.

Compatibility Overview

The WP 962/3 x Oil Filter Set is designed for a broad spectrum of utility vehicles. Below are representative models and manufacturers where this filter has proven compatibility:

• Volvo Trucks & Vans – various chassis series
• Ford Commercial Vehicles – F-Series, Transit, and other heavy‑duty models
• General Motors (GM) – Sprinter, Chevrolet Silverado, and others
• Fiat Professional Vehicles – Ducato, Iveco, and related lines
• Other OEMs with similar filter housing dimensions and mounting configurations

Why Choose MANN‑FILTER?

MANN‑FILTER is a globally recognized brand known for its commitment to quality, reliability, and environmental responsibility. The WP 962/3 x Oil Filter Set reflects this ethos through:

• Rigorous Testing: Each filter undergoes extensive laboratory testing to ensure durability under extreme conditions.
• Eco‑Friendly Design: Materials and manufacturing processes are optimized for minimal environmental impact.
• Customer Support: Technical assistance is available for installation queries, performance data, and product selection guidance.

Conclusion

The MANN‑FILTER Oil Filter WP 962/3 x – Oil filter set with gasket stands out as a reliable, high‑performance solution for utility vehicle owners seeking to protect their engines from contaminants while enjoying extended service intervals. Its robust construction, superior filtration capability, and proven compatibility across major commercial vehicle brands make it an indispensable component in any fleet maintenance strategy.

Frequently Asked Questions

• Q: Can I use this filter with a manual or automatic transmission?
  A: Yes, the WP 962/3 x is compatible with both manual and automatic transmissions as long as the vehicle’s oil system matches the filter specifications.
• Q: Is the gasket included in the set?
  A: Absolutely. The product comes complete with a high‑quality gasket to ensure a leak‑free seal.
• Q: What is the expected lifespan of this filter under normal operating conditions?
  A: Typically, the filter can last between 10,000–15,000 miles, but this may vary based on driving environment and oil quality.

Technical Data Sheet (Summary)

For further technical assistance or detailed specifications tailored to your vehicle model, consult the MANN‑FILTER technical support resources.