Moog RE-SB-1694 Stabilizer Bush

Moog RE-SB-1694 Stabilizer Bush

The Moog RE-SB-1694 Stabilizer Bush is a high‑performance rubber bushing designed to replace the original suspension stabilizer bush found on a wide range of Renault vehicles. Crafted from premium polyurethane, this component delivers superior durability and consistent handling characteristics over extended mileage.

Key Features

• Material: Premium polyurethane rubber with reinforced steel inserts for enhanced load distribution.
• Dimensions: Outer diameter 22 mm, inner diameter 18 mm (exact fit for the RE‑SB‑1694 specification).
• Load Capacity: Rated to withstand high torsional forces typical of front and rear stabilizer bars.
• Installation: Designed for a quick, tool‑free installation that aligns with OEM mounting points.
• Compatibility: Suitable for both left‑hand drive and right‑hand drive models across the Renault Clio, Super 5, Express, Rapid, and other series.

Benefits of Choosing Moog RE-SB-1694

The Moog RE-SB-1694 Stabilizer Bush offers several advantages over generic aftermarket replacements:

1. Consistent Handling: The polyurethane construction maintains its shape and stiffness, ensuring that the vehicle’s steering response remains predictable.
2. Reduced Noise & Vibration: Its engineered damping properties suppress harsh road noise and vibration transmitted through the stabilizer bar.
3. Long‑Term Reliability: Resistant to cracking, oil degradation, and UV exposure, this bush provides a lifespan that matches or exceeds OEM expectations.
4. Easy Replacement: The design eliminates the need for specialized tools; the bushing slides into place with minimal effort.

Installation Guide

Follow these steps to install the Moog RE-SB-1694 Stabilizer Bush on your vehicle:

1. Preparation: Raise the vehicle securely using a jack and support it with jack stands. Remove any wheel covers or protective plates that may obstruct access.
2. Remove Old Bush: Locate the stabilizer bar attachment point on the suspension arm. Use a suitable socket to loosen the retaining nut, then slide the old bush out of its groove.
3. Clean the Groove: Wipe away any debris or old rubber residue with a clean rag to ensure proper seating of the new bush.
4. Insert New Bush: Slide the Moog RE-SB-1694 into the groove until it sits flush against the suspension arm. Verify that the bushing is fully seated and not twisted.
5. Tighten Retaining Nut: Reinstall the retaining nut and tighten to the manufacturer’s torque specification (typically 20–25 Nm). Use a calibrated torque wrench for accuracy.
6. Repeat on Opposite Side: If your vehicle requires bilateral replacement, repeat the process on the opposite side of the suspension arm.
7. Lower Vehicle & Test Drive: Carefully lower the car from jack stands. Perform a short test drive to confirm that steering feels smooth and no abnormal noises are present.

Compatibility Overview

The Moog RE-SB-1694 Stabilizer Bush is engineered for use on the following vehicle families:

• Renault Clio (Series I & II)
• Renault Super 5 / Express / Rapid / Extra / Symbol / Thalia / Lutécia
• Renault Dacia models that share the same stabilizer bar geometry
• Other OEMs with identical stabilizer bush dimensions (22 mm outer diameter)

Because the component is dimensionally precise, it can be swapped directly into any vehicle that originally shipped with a RE‑SB‑1694 style stabilizer bush. No additional adapters or modifications are required.

Maintenance Tips

• Inspect the bush periodically for signs of wear such as cracking, hardening, or oil seepage.
• Avoid exposing the rubber to extreme temperatures; keep the vehicle in a climate-controlled environment when possible.
• If you notice any loss of steering stability or increased road noise, replace the bush promptly to prevent further suspension damage.

Why Moog?

Moog is renowned for its commitment to quality engineering and rigorous testing. The RE‑SB‑1694 stabilizer bush reflects this heritage through:

• Precision machining of the steel inserts to match OEM tolerances.
• Extensive fatigue testing under simulated road conditions.
• Use of high‑grade polyurethane that resists oil, heat, and UV degradation.

Choosing a Moog component ensures that your vehicle’s suspension system remains as reliable and responsive as when it left the factory floor.

Conclusion

The Moog RE-SB-1694 Stabilizer Bush is an essential upgrade for drivers seeking to maintain or restore optimal handling performance on a variety of Renault models. Its superior material composition, precise fitment, and straightforward installation make it the preferred choice for both professional mechanics and knowledgeable DIY enthusiasts.