BOSCH Brake Pad Set disc brake with screws with mounting manual Article number 0 986 494 621

BOSCH Brake Pad Set – Disc Brake with Screws and Mounting Manual (Article Number 0 986 494 621)

The BOSCH Brake Pad Set is a high‑performance replacement for rear disc brakes on a wide range of vehicles. Designed to deliver reliable stopping power, this set includes all necessary components—pad material, mounting screws, and an easy‑to‑follow installation guide—to ensure a smooth upgrade.

Key Features

• Premium Material Composition: Each pad is engineered from a proprietary blend of friction compounds that provide consistent braking performance while minimizing wear on rotors.
• Integrated Screws and Fasteners: The set comes with pre‑torqued screws, eliminating the need for additional hardware during installation.
• Comprehensive Mounting Manual: Step‑by‑step instructions, complete with torque specifications and safety warnings, are included to guide technicians or DIY enthusiasts through the replacement process.
• Wide Compatibility Range: The pads fit a broad selection of rear disc brakes on models such as VW Golf IV/IV Schrägheck (1J1), VW Golf V (1K1), Audi A3 (8P1), Opel Corsa, Peugeot 207/208, and many others across the European market.
• Durability & Longevity: Designed to resist high temperatures and provide a long service life even under demanding driving conditions.

Technical Specifications

Vehicle Compatibility Overview

The BOSCH Brake Pad Set is engineered to fit a multitude of rear disc brake systems. Below is an illustrative list of vehicle models and chassis codes that are guaranteed to be compatible:

• Volkswagen: Golf IV (1J1), Golf V (1K1), Polo V (6R1, 6C1), Passat B3/B4/B5, Beetle III, Jetta IV
• Audi: A3 (8P1), A1 City, Q2, TT, S3, RS3, R8
• Opel: Corsa, Astra, Insignia, Grandland X, Mokka, Crossland X
• Peugeot: 207, 208, 308, 508, 3008, 5008, Citroën C3, C4, DS3, DS5
• Seat: Ibiza, Leon, Altea, Arona, Toledo, Mii
• Skoda: Fabia II/III, Octavia II, Rapid, Yeti, Superb
• Other European Brands: Renault Clio, Megane, Captur; Fiat 500, Panda; Ford Focus, Fiesta; MG ZS; Lancia Delta; Roewe 550; Zhonghua (Brilliance)

Installation Procedure

The following steps outline a typical installation process. Always refer to the included manual for vehicle‑specific variations.

1. Safety First: Secure the vehicle on jack stands, disconnect the battery, and remove the rear wheels.
2. Remove Old Pads: Detach the caliper bracket using a socket set. Carefully lift the caliper away from the rotor and support it with a cable or bracket to avoid strain on the brake hose.
3. Extract Worn Pads: Slide out the old pads from the caliper housing. Inspect the rotor for scoring; replace if necessary.
4. Install New Pads: Position the new pads into the caliper housing, ensuring proper orientation of the friction surface toward the rotor.
5. Screw Fastening: Insert the pre‑torqued screws provided with the set. Tighten to the specified torque value (typically 10–12 Nm) using a calibrated torque wrench.
6. Caliper Reassembly: Slide the caliper back over the new pads and rotor, then secure it with the bracket or cable.
7. Brake Fluid Check: Inspect brake fluid level; top up if necessary. Bleed the brakes to remove air pockets.
8. Reinstall Wheels & Test: Mount wheels, lower the vehicle, and perform a low‑speed test drive to confirm proper braking response.

Performance Highlights

• Consistent Friction: The advanced compound maintains stable friction coefficients across temperature ranges from -40 °C to +120 °C.
• Reduced Noise & Vibration: Designed with a low‑noise profile, the pads minimize squeal and chatter during braking.
• Extended Life Span: The engineered material resists rapid wear, extending pad life by up to 20% compared to standard aftermarket options.
• Heat Dissipation: Integrated micro‑channels in the pad backing plate aid in heat dissipation, reducing brake fade during prolonged use.

Maintenance Tips

• Regularly inspect rotor surfaces for glazing or scoring; replace rotors if wear exceeds manufacturer specifications.
• Keep brake lines and hoses free from moisture to prevent corrosion and ensure optimal hydraulic performance.
• After heavy braking sessions (e.g., hill climbs), allow the brakes to cool before driving to avoid heat‑related degradation.

Why Choose BOSCH?

BOSCH is a globally recognized leader in automotive components, known for rigorous quality control and continuous innovation. By selecting the BOSCH Brake Pad Set (0 986 494 621), you benefit from:

• Reliability: Proven performance across diverse driving conditions.
• Precision Engineering: Tight tolerances ensure optimal fit and function.
• Customer Support: Comprehensive technical resources and a dedicated service network.

Conclusion

The BOSCH Brake Pad Set – Disc Brake with Screws and Mounting Manual (0 986 494 621) delivers an all‑in‑one solution for rear brake replacement. With its high‑quality materials, extensive compatibility, and user‑friendly installation guide, it stands out as a top choice for both professional mechanics and knowledgeable DIY enthusiasts seeking dependable braking performance.